The arguments are `gsize` and otherwise emit warnings on e.g. i386
Fixes 4cae04064 ("intel: implement support for RPC-powered xmm7360")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
T99W696 is the first Foxconn PCIE modem whick uses Qualcomm's VID/
PID. Driver ref: https://lore.kernel.org/mhi/20250528092232.16111-1-slark_xiao@163.com
This changes include 2 parts:
i: Add device for foxconn plugin
ii: Show SSVID/SSPID for parameter "--firmware-status". This helps
the fwupd get the right firmware upgrade method.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
This new error code 'MM_SERIAL_ERROR_SEND_TIMEOUT' is used to make it easier
to distinguish why the transmission failed. Until now,
'MM_SERIAL_ERROR_SEND_FAILED' was always returned. This new error code is now
returned for an 'EAGAIN', as this is more likely to be a TIMEOUT.
This makes debugging easier, as a better error analysis is now possible.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Send each character through the state machine one at a time. Some
modems (various Quectel ones for example) can process multiple at
the same time, and while that should be easily implemented using
the new changes to send_dtmf() it's not done in any plugin yet.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Split into groups of non-pause characters and single pause characters
by themselves and return as an array of strings.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Generalize the timeout/stop logic that QMI requires into the
base call. We'll use this to implement the pause character (,)
generically.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Instead of hard-coding a 500ms DTMF tone duration, let applications
use a specific duration at call setup time.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Split out the things we actually use from MMBaseModem into
separate properties that can be independently implemented
(or just left NULL) for unit tests.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Add an interface and implementation for a port scheduler that round-
robins between ports the scheduler is attached to, serializing command
execution among one or more MMPortSerial instances.
Theory of operation:
Sources (e.g. MMPort subclasses) register themselves with the scheduler.
Each source notifies the scheduler whenever its command queue depth changes,
for example when new commands are submitted, when commands are completed,
or when commands are canceled.
The scheduler will round-robin between all sources with pending commands,
sleeping when there are no pending commands from any source.
For each source with a pending command the scheduler will emit the
'send-command' signal with that source's ID. The given source should
send the next command in its queue to the modem.
When that command is finished (either successfully or with an error/timeout)
the source must call mm_port_scheduler_notify_command_done() to notify the
scheduler that it may advance to the next source with a pending command, if
any. If the 'send-command' signal and the notify_command_done() call are not
balanced the scheduler may stall.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
If the object has an owner ID already but doesn't yet have enough
information to build its log ID, don't cache a less-than-useful
log ID string for it.
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Logger id (the one generated from build_id interface method and owner_id
property) is generated and cached the first time it is required, further
uses just return the cached value.
Add a cache reset method so if the interface implementer knows that its
logger id could have changed it could force its re-generation.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
According to TS 23.038 the language is stored at the beginning of the
information page not in the "header".
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Some older MTK-based phones (Tecno T528 NEW) reply to +CPIN with
an error but are (obviously) unlocked, otherwise they wouldn't
be able to boot up to the point of talking to a computer. Since
they are actually unlocked they will happily give out the IMSI
even if +CPIN errors.
To work around the +CPIN issue treat the device as unlocked if we
can successfully read the IMSI.
Fixes: https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/980
Signed-off-by: Dan Williams <dan@ioncontrol.co>
Text messages could also be SMS
Fixes 1fb74f266 ("data: Add a policy rule to access the cellbroadcast API")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
The manufacturers can offer a firmware update file 'ota.bin' with which
the firmware can be updated in the modem via a manufacturer tool using
windows. The tool is only available for Windows and can therefore not be used
for embedded devices.
A investigation has shown that this tool updates the firmware via 'mbim-qdu'.
The update service 'fwupd' which has a 'modemmanager' plugin can install the
firmware via 'mbim-qdu'. For this to work, the ModemManager must export this
update method via the firmware interface.
As the 'mbim-qdu' is a generic update method, the check is integrated into the
'mm-broadband-modem-mbim' class. If 'mbim-qdu' update method is supported by
the mbim interface and the udev env variable 'ID_MM_MBIM_QDU' is set for this
modem, then the 'mbim-qdu' update is exported via dbus.
The following line must be added to the '77-mm-cinterion-port-types.rules'
udev rules file, for example, so that the mbim-qdu update for the 'MV31' can
be used.
ATTRS{vendor}=="0x1e2d", ATTRS{device}=="0x00b3", ENV{ID_MM_MBIM_QDU}="1"
This is the corresponding output of the 'mmcli' command to show the supported
update method for the 'MV31'.
root@G3-10940 ~ # mmcli -m Modem1 --firmware-status
Firmware | method: mbim-qdu
| device ids: USB\VID_1E2D&PID_00B3&REV_0414&CARRIER_GCF
| USB\VID_1E2D&PID_00B3&REV_0414
| USB\VID_1E2D&PID_00B3
| USB\VID_1E2D
| version: T99W175.F0.1.0.0.9.GC.004.063 - 0A000804
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Maciej S. Szmigiero
Dan Williams
Guido Günther
Slark Xiao
Florian Eckert