We were trying to load the generic modes supported reported by either *CNTI=2 or
AT+WS46=?, so that then we could filter out the MBM-specific modes unsupported.
But, this may not be ideal, as both these two commands may fail:
[mm-broadband-modem.c:1612] modem_load_supported_modes(): loading supported modes...
[mm-port-serial.c:1237] mm_port_serial_open(): (ttyACM1) device open count is 3 (open)
[mm-port-serial.c:1294] _close_internal(): (ttyACM1) device open count is 2 (close)
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): --> 'AT*CNTI=2<CR>'
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): <-- '<CR><LF>ERROR<CR><LF>'
[mm-serial-parsers.c:364] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
[mm-broadband-modem.c:1546] supported_modes_cnti_ready(): Generic query of supported 3GPP networks with *CNTI failed: 'Unknown error'
[mm-port-serial.c:1237] mm_port_serial_open(): (ttyACM1) device open count is 3 (open)
[mm-port-serial.c:1294] _close_internal(): (ttyACM1) device open count is 2 (close)
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): --> 'AT+WS46=?<CR>'
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): <-- '<CR><LF>ERROR<CR><LF>'
[mm-serial-parsers.c:364] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
[mm-broadband-modem.c:1494] supported_modes_ws46_test_ready(): Generic query of supported 3GPP networks with WS46=? failed: 'Unknown error'
[mm-iface-modem.c:3974] load_supported_modes_ready(): couldn't load Supported Modes: 'Couldn't retrieve supported modes'
Instead, we'll ask the modem for the list of modes supported, and return that
directly.
The default setup uses a refresh time of 30s, which means that even if the GPS
location updates are received at a higher frequency, the DBus interface will
still expose at most one update every 30s.
This patch includes a new "SetGpsRefreshTime()" method in the Location
interface, which takes a single 'u' parameter, specifying the refresh rate to
use, in seconds. This method also allows 0 being passed, which will make the
implementation to publish the GPS location updates are soon as ModemManager
detects them.
Along with the new method, a "GpsRefreshTime" read-only property is exposed
to specify the refresh time in effect.
The new method and property will only be applicable if the device has GPS
capabilities.
https://bugs.freedesktop.org/show_bug.cgi?id=89924
Use the "WDS Get Packet Statistics" method to query for the ongoing number
of bytes transmitted or received. The QMI implementation uses different WDS
clients for IPv4 and IPv6; the stats reported are a combination of the values
retrieved from both WDS clients.
The CPMS test parser was expecting 3 groups (parenthesis enclosed lists) of
memory IDs, e.g.:
+CPMS: ("SM","ME"),("SM","ME"),("SM","ME")
But some modems like the Huawei MU609 may just report single elements, not
groups, e.g.:
+CPMS: "SM","SM","SM"
This patch avoids using g_strsplit() to split the groups, as that is unaware
of the possible replies without groups. Instead, a new helper method is
implemented which does the group/item split itself, considering also the
possibility of a reply with mixed groups and non-groups, like e.g.:
+CPMS: ("SM","ME"),"SM","SM"
Additionally, we also now support the case where the groups are empty, e.g.:
+CPMS: (),(),()
https://bugs.freedesktop.org/show_bug.cgi?id=92243
The XCASE terminal mode flag because is no longer specified by POSIX
and has no effect on linux. Because of the latter fact we can remove
it. This fixes a compilation error with musl libc.
. A shift has undefined behaviour if the mathematical result
(lhs * 2^{rhs}) doesn't fit in the range of the resulting type.
In other words, you can't left shift into the sign bit of a
signed integer type.
The error message is:
mm-broadband-modem.c:3308:15: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
SUMMARY: AddressSanitizer: undefined-behavior mm-broadband-modem.c:3308:15 in
Auth settings will be added in a QMI message only if at least one of these is
requested:
* An explicit auth preference is requested.
* User string is given and isn't empty.
* Password string is given and isn't empty.
Given that the Location interface requires 3GPP info reported by the 3GPP
interface, we should only trigger registration checks once the Location
interface has been already enabled and ready to be used. If we don't do this,
we'll end up e.g. getting initial MCCMNC values but never reaching the Location
interface properly.
So, fix this by triggering all registration checks (CDMA and 3GPP) only after
having enabled all interfaces.
LAC/CID may only be given in the serving system indications when the values
change, and therefore we shouldn't reset the values to 0 whenever they're not
reported.
This seems to happen in newer devices; older devices like the MC7710 did always
report the values in the indications.
This check makes no sense. We're converting from a ModemManager enum to a QMI
enum, nothing else; i.e. 'caps' is *not* the current capabilities of the modem.
Variability in the response style from certain modems causes the parsing
of the +CGMR response to fail. For example, the Telit HE910 inserts an
empty string ("") in the second field of the response, causing the
sscanf implementation to fail.
This patch converts the parsing of the CGMR response to a regex that
allows for more flexibility and robustness, and adds unit tests around
the parsing call.
Signed-off-by: Nick Stevens <Nick.Stevens@digi.com>
Previously the enable unsolicited messages command (+CNMI) was only
being sent on the primary. This patch adds support for sending the
enable on the secondary as well. If the secondary doesn't exist, or if
setting the enable causes an error, a warning is logged but no error is
propagated up.
This change is needed for proper SMS operation on the Telit HE910, which
requires that +CNMI be sent to both primary and secondary. Since a
failure to send the +CNMI command on the secondary is a non-fatal error,
it is unlikely that this will cause issues with other modems.
Signed-off-by: Nick Stevens <Nick.Stevens@digi.com>
CDMA-capable modems (like a Sierra EM7355) will fail to even enable,
because the internal CDMA code tries to initialize using AT commands and
that fails because many MBIM modems don't have an AT port. We should
figure out how to support minimal MBIM + CDMA using MBIM instead of
AT-anything.
[mm-broadband-modem.c:9000] enabling_step(): Modem has CDMA capabilities, enabling the Modem CDMA interface...
[mm-iface-modem-cdma.c:946] mm_iface_modem_cdma_run_registration_checks(): Running registration checks (CDMA1x: 'yes', EV-DO: 'yes')
[mm-broadband-modem.c:7397] setup_registration_checks_context_complete_and_free(): Will skip all QCDM-based registration checks
[mm-broadband-modem.c:7418] setup_registration_checks_context_complete_and_free(): Will skip generic detailed registration check, we don't have Sprint commands
[mm-iface-modem-cdma.c:768] registration_check_step(): Starting QCDM-based registration checks
[mm-iface-modem-cdma.c:780] registration_check_step(): Skipping all QCDM-based checks and falling back to AT-based checks
[mm-iface-modem-cdma.c:823] registration_check_step(): Starting AT-based registration checks
[mm-iface-modem-cdma.c:641] get_service_status_ready(): Could not get service status: No AT port available to run command
[mm-iface-modem.c:1392] __iface_modem_update_state_internal(): Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> disabled)
This response is already managed by the generic AT serial port and translates
it into a proper error. This change also avoids the Call.Start() call to report
a timeout in the serial port, instead we get a proper no-carrier error.
Before:
$ sudo mmcli -m 0 --voice-create-call="number=12345678"
Successfully created new call:
/org/freedesktop/ModemManager1/Call/1 outgoing (unknown)
$ sudo mmcli -o 1 --start
error: couldn't start the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Serial.ResponseTimeout: Serial command timed out'
After:
$ sudo mmcli -m 0 --voice-create-call="number=12345678"
Successfully created new call:
/org/freedesktop/ModemManager1/Call/1 outgoing (unknown)
$ sudo mmcli -o 1 --start
error: couldn't start the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Connection.NoCarrier: No carrier'
Aleksander Morgado
Felix Janda
Dan Williams
Yunlian Jiang
Nick Stevens
Marco Bascetta
Riccardo Vangelisti