Telit modems that require hexadecimal number when specifying 4G bands
also reply to #BND=? command with a 4th parameter <LTE_band_ext>
(e.g. LM940, LM960, LN920, FN980).
On the other hand, modems that require decimal number when specifying 4G
bands only return 3 parameters to the same command.
It is then possible replace the detection of ext_4g_bands via UDEV tags
with an inspection of BND=? reply.
We can safely cast the data in a GArray to gpointer first, and then
to the pointer type we require.
telit/mm-modem-helpers-telit.c: In function 'mm_telit_build_bnd_request':
telit/mm-modem-helpers-telit.c:256:55: error: cast increases required alignment of target type [-Werror=cast-align]
bands_str = mm_common_build_bands_string ((const MMModemBand *)(bands_array->data), bands_array->len);
^
telit/mm-modem-helpers-telit.c:275:55: error: cast increases required alignment of target type [-Werror=cast-align]
bands_str = mm_common_build_bands_string ((const MMModemBand *)(bands_array->data), bands_array->len);
^
Since this plugin uses a bitmask to represent bands, we have
to be wary of shifting outside the precision of the bitmask
storage type. In this case, it was possible to generate 1 << 31
in a signed integer type as an intermediate step of B3G_FLAG,
which is undefined behavior (and usually results in INT_MIN,
breaking comparisons with the value).
Bug was reported to the chromium tracker at crbug.com/1019301
Original patch updated by Aleksander Morgado to leave
MM_MODEM_BAND_TELIT_3G_LAST as MM_MODEM_BAND_UTRAN_19, as that is the
highest 3G band supported by the current implementation. Worth noting
that this was not a real bug as the maximum flag we would have been
setting was (1 << 19) anyway.
And added support for several new things, including:
* Setting "any" band now attempts to set all supported bands.
* Added new 2G band value '5' (egsm+dcs+pcs+g850).
* Setup support for two different 3G band combinations, a default one
plus an alternate one applicable to the LM940/960 models only. The
alternate combination is selected via udev tags.
During the refactor, the following Telit-specific helpers were also
removed and exchanged with more generic counterparts.
* mm_telit_bands_contains() -> mm_common_bands_garray_lookup()
* mm_telit_get_band_flags_from_string() -> mm_parse_uint_list()
Updated to use the non-deprecated MMModemBand values.
Also, use explicit enums for 2G/3G bands when building internal flags,
as relying on UTRAN band 7 (MM_MODEM_BAND_U2600) being greater than
UTRAN bands 8 and 9 is a MM implementation issue.
Given that the MMTelitQssStatus enums are mapped directly to the
values read from the #QSS response, we need to make sure that we never
return a value for which we don't have an enum defined.
Also, use set_error() instead of the propagate_error() + error_new()
combo.
Currently, Telit's SIM swap implementation is stateless and
based on #QSS unsolicited messages 0/1 (SIM_REMOVED/SIM_INSERTED).
However, the user might have configured the modem in order to provide a
more detailed information, with #QSS values 2/3 (SIM UNLOCKED/SIM READY).
In this case and with current implementation, even receiving "#QSS: 3" will
trigger the "SIM swap" logic. The same issue might occur in other use cases
too, i.e. with SIM locked or when the message is received from both USB
ports.
This patch makes SIM swap implementation stateful, and it considers as an
actual SIM swap, only transitions from #QSS: 0 to #QSS: 1/2/3 and vice
versa.
- Refactored mm_telit_parse_csim_response in order to correctly
recognize the following +CSIM error codes:
* 6300 - Verification failed
* 6983 - Authentication method blocked
* 6984 - Reference data invalidated
* 6A86 - Incorrect parameters
* 6A88 - Reference data not found
- Updated correspondent tests.
- Finally, some minor changes in other files for better error logging
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100374
In place of two slightly different regexes for 2g/3g and 2g/3g/4g modems
we now use only one regex with conditional patterns for both supported
and current Bands detection.
Adding also minor fix in test code
GE910 is a 2g only modem and when queried for bands it returns
only a 2g set of bands:
--> 'AT#BND=?<CR>'
<-- '<CR><LF>#BND: (0-3)<CR><LF><CR><LF>OK<CR><LF>'
Current regex fails, since it considers the 3g bands block mandatory.
A similar problem happens for current bands.
This patch modifies the regular expressions for properly
supporting GE910 and updates tests.
Carlo Lobrano
Amol Lad
Aleksander Morgado
Eric Caruso
Daniele Palmas
Ville Skyttä
Colin Helliwell
Ben Chan
Carlo Lobrano