The returned list contains full references, so make sure we unref them
before going on. Note that it's ok to return a pointer to one object
inside this list even if we're unref-ing them all, because we're sure
that the caller knows it's peek-ing a port object.
During the CONNECT_3GPP_CONTEXT_STEP_LAST step,
connect_3gpp_context_step() conditionally creates and populates a
MMBearerConnectResult object into the GSimpleAsyncResult object when the
ipv4_config field of the Connect3gppContext struct is set. That assumes
the ipv4_config field is always initialized in
connect_dhcp_check_ready() during the
CONNECT_3GPP_CONTEXT_STEP_IP_CONFIG step. Instead of having such an
assumption, this patch modifies connect_3gpp to always initialize
the ipv4_config field, such that connect_3gpp_context_step() always
populates a MMBearerConnectResult object into the GSimpleAsyncResult
object.
This modem ends up exposing a cdc-wdm port and a WWAN network
interface, but the cdc-wdm port is totally unusable, it won't reply to
any AT command or anything.
Instead this modem can do NDISDUP via TTY, which is what the Windows
drivers are also doing.
The method doing the operator name normalization takes as input the
current configured modem charset. If this is UCS2, we will now just
assume this is a hint: the string may or may not come in hex/UCS2.
This logic makes the custom operator name loading in Huawei unneeded,
if the modem is configured in UCS2, we still properly process operator
names coming in plain ASCII.
g_free and g_object_unref are in form of `void (*)(gpointer)`, which
matches the GDestroyNotify signature. An explicit GDestroyNotify cast on
g_free and g_object_unref is thus not needed.
There are 2 main types of udev properties: device-specific and
port-specific.
The port-specific properties are set independently per port (e.g. port
type hints set per interface number for a given vid:pid).
The device-specific properties apply to all ports in the device. Some
of these properties are currently expected in the physical device
(e.g. ID_MM_PLATFORM_DRIVER_PROBE) while some others are expected in
each port (e.g. the plugin udev tag filters).
This patch tries to simplify the logic and just assume that the device
specific tags may be given in either the physical device or the port
device, by providing separate APIs to retrieve port-specific or
device-specific (global) properties. If the same tag is given in both
the device and the port, the one in the device takes preference.
For the generic backend, these new APIs are really useless, as all
device-specific and port-specific properties are always stored in the
port object themselves (there is no 'tree' of devices in the generic
backend, no 'physdev' device).
For the udev backend, though, there really is a difference, as the
tags may be set in port or device.
https://bugs.freedesktop.org/show_bug.cgi?id=100156
g_type_init() has been deprecated (and also marked with the attribute
'deprecated') since glib 2.36 as the type system is automatically
initialized. Since the minimum version of glib required by ModemManager
is 2.36, calling g_type_init() isn't necessarily in the ModemManager
code.
The original g_udev_device_get_property_as_int() uses strtol() without
an explicit base (i.e. 0) so that the base is autodetected from the
string whenever possible (e.g. if prefixes with '0x' it is treated as a
hexadecimal string).
But, for ID_USB_INTERFACE_NUM, we explicitly require reading the number
as an hex string, even if we don't have any '0x' prefix.
Reported-by: Matthew Stanger <stangerm2@gmail.com>
A default implementation to monitor the ongoing connection is provided in the
generic MMBroadbandModem, based on AT+CGACT? to check whether the PDP context
of the connection (identified by the cached cid) is active or not.
This commit also disables the connection monitoring logic in those plugins that
have custom connection methods.
Split into two different actions the actual COPS? response parsing and the
operator name normalization process.
Also, allow parsing not only the operator string, but also the format, mode
and the optional access technology value.
<debug> (ttyUSB2): --> 'AT^SYSCFG?<CR>'
<debug> (ttyUSB2): <-- '<CR><LF>^SYSCFG:14,2,400380,1,2<CR><LF><CR><LF>OK<CR><LF>'
<warn> couldn't load current allowed/preferred modes: 'No SYSCFG combination found matching the current one (14,2)'
14,2 means "WCDMA-only; acquire WCDMA then GSM" which is somewhat
non-sensical. The supported modes parsing doesn't generate this
combination because it doesn't really make sense, so current mode
matching failed. Just fix up the non-sensical acquisition order
to 0 (automatic).
The mm_base_modem_grab_port() now receives a MMKernelDevice directly from the
plugin, which is then stored in the MMPort corresponding to the port.
This means that we have direct access to e.g. all properties set by udev rules
everywhere, and we don't need additional GUdevClient objects (e.g. like the one
used in the Huawei plugin to detect NDISDUP support during runtime).
For virtual ports (e.g. generated during unit tests), we have a new 'generic'
kernel device object which just provides the values from the kernel device
properties given during its creation.
Instead of relying constantly on GUdevDevice objects reported by GUdev, we now
use a new generic object (MMKernelDevice) for which we provide an initial GUdev
based backend.
All ports of the same modem reported by the kernel will all be associated with
a common 'uid' (unique id), which uniquely identifies the physical device. This
logic was already in place, what we do now is avoid calling it the 'sysfs
path' of the physical device, because we may not want to use that to identify
a device.
This logic now also enables the possibility of "naming" the modems in a unique
way by setting the "ID_MM_PHYSDEV_UID" property in the "usb_device" that owns
all the ports.
E.g. a custom device has 4 modems in 4 different USB ports. The device path of
each USB device will always be the same, so the naming rules could go like this:
$ vim /usr/lib/udev/rules.d/78-mm-naming.rules
ACTION!="add|change|move", GOTO="mm_naming_rules_end"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-1"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-2"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-3"
DEVPATH=="/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4", ENV{ID_MM_PHYSDEV_UID}="USB-MODEM-4"
LABEL="mm_naming_rules_end"
Each of the modems found will have a unique UID retrieved from the previous list
of rules. Then, "mmcli" has also been updated to allow using the UID instead of
the modem DBus path or index, e.g.:
$ sudo mmcli -m USB-MODEM-1
/org/freedesktop/ModemManager1/Modem/0 (device id '988d83252c0598f670c2d69d5f41e077204a92fd')
-------------------------
Hardware | manufacturer: 'ZTE CORPORATION'
| model: 'MF637'
| revision: 'BD_W7P673A3F3V1.0.0B04'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '356516027657837'
-------------------------
System | device: 'USB-MODEM-1'
| drivers: 'option'
| plugin: 'ZTE'
| primary port: 'ttyUSB5'
| ports: 'ttyUSB5 (at)'
...
$ sudo mmcli -m USB-MODEM-1 --enable
...
Commit a66871a287 introduced an additional
ATTRS{idVendor} match condition in the same rules matching by interface class,
subclass and protocol. We shouldn't be doing that because we cannot mix parent
attribute matchings from different parents.
Rules with a single condition where a parent property is checked with != don't
work properly. E.g.:
SUBSYSTEMS!="usb", GOTO="end"
or:
ATTRS{idVendor}!="abcd", GOTO="end"
Instead, we can mix both those previous parent rules and match them:
SUBSYSTEMS=="usb",ATTRS{idVendor}=="abcd", GOTO="next"
GOTO="end"
LABEL="next"
# Apply rules here
LABEL="end"
In this case both SUBSYSTEMS and ATTRS conditions apply to the parent usb_device
(idVendor attribute is only available in the usb_device), so they apply to all
ports of the same device.
Aleksander Morgado
Ben Chan
Riccardo Vangelisti
Dan Williams