The udev flag "ID_MM_QMI_FACILITY_LOCK_QUERY_REDUCED" allows to skip
facility lock state query "get_ck_status" on the DMS path for devices
where this isn't implemented properly.
On devices that have enabled "device locks", this flag won't work well.
Skipping the query doesn't disable the locks.
Fixes#448
By the time we report the bearer as 'Connected', the DBus client
should also be able to know right away the value of
'ReloadStatsSupported', instead of needing to wait for it to be
updated asynchronously.
This logic adds one additional step in the generic connection
sequence for this purpose, which is run after the modem is connected
but before we report the state change via DBus.
This property means that the current bearer can reload stats and read TX
and RX bytes transmitted.
The property is initiliazed as soon as the bearer is connected.
Signed-off-by: Frederic Martinsons <frederic.martinsons@sigfox.com>
We originally did only 3 attempts every 3s, so the maximum probing
time for a given TTY port looking for AT capabilities was 9 seconds.
We now duplicate the amount of times, so up to 18s of port probing,
which is quite a lot more than before, but unfortunately it's needed
because most new modems take a lot of time to boot up internally.
The way to avoid this long probing time is to make sure port type
hints for the possible AT ports are set correctly.
Fixes https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/issues/379
The ModemManager codebase has been ported to support Basic Connect v3
messages as defined in MBIMEx v3.0, so at this point we can now switch
to use it by default whenever possible.
Whenever MBIMEx v3.0 is enabled, the logic should create requests and
parse responses using the updated format.
Based on an initial implementation by Som_SP <somashekhar.puttagangaiah@intel.com>
Whenever MBIMEx v3.0 is enabled, the logic should create requests and
parse responses using the updated format.
Based on an initial implementation by Som_SP <somashekhar.puttagangaiah@intel.com>
When an eSIM doesn't have any profile set, we should treat it as fully
ready to be used; i.e. so that a new SIM object can be created and
initialized.
In this state, the "eSIM status" property will say "No profiles".
Instead of running the Susbcriber Ready Status separately for IMSI and
ICCID, we run it only once and store the results in a new private
struct.
It only saves one request/response right now, but it will save more
once introduced other SIM parameters loaded with the same method.
The udev rules expect matches based on shell globbing pattern, not
based on regex. This means that "[0-9]*" doesn't mean "zero or more
digits", it actually means "one digit and zero or more other
characters".
So, avoid the regex like match, even if it worked for us, because it
didn't mean what we thought it meant, plus, it breaks our custom udev
rules processing logic, in which we convert the input patterns into
real regex expressions.
See https://bbs.archlinux.org/viewtopic.php?pid=1415916#p1415916
While at it, also make sure that the wildcard matching is done
exclusively for prefix and suffix matches, never in the middle of
a string, or our custom rules parser would not match correctly.
CDMA WAPs have multipart message information in a 3 byte header in-band
with the user data, as described in WAP-259-WDP-20010614-a. Set the
message concat parameters and use the message-id as the reference.
If the modem reports any error during the connection status check,
we're creating a GError but never disposing it. We don't need that
GError for anything, so just discard it.
We remove the built-in FCC unlock procedures from the ModemManager, we
will no longer run them automatically, and instead rely on external
scripts/programs to do that.
Packages providing the external FCC unlock tools can install them in
${pkglibdir}/fcc-unlock.d.
Users manually enabling external FCC unlock tools can install them in
${pkgsysconfdir}/fcc-unlock.d.
The user-enabled path takes precedence over the package-enabled one.
MM was not processing NR5G signal strength for QMI signal info
response/indication message. Thus modem access technology and
signal quality was not reported for NR5G-only modems.
Process and consider NR5G signal strength too while getting
signal quality for modem interface.
As 5GNR does not have RSSI, take NR5G signal quality to be minimum
of percentage strength computed using RSRP, SNR and RSRQ values
individually.
MM was not processing NR5G service info for QMI system info
response/indication message. This led to NR5G-only modems never
having 'registered' status.
Process NR5G system info and accordingly update the 5gs
registration status for qmi modems.
This commit also removes some stale comments.
The input pattern given to the string_match() method is not a regex
pattern and we cannot use it as that, because all the special
characters (e.g. '.') would not be treated correctly.
Also, the prefix matching with the wildcard at the end of the string
needs to be converted to a proper regex wildcard, i.e. '.*'.
This logic also adds support for suffix matching, with a wildcard at
the beginning of the string, e.g. as the ones used for the wwan kernel
device name matching rules (i.e. '*MBIM').
Unit tests are added to cover all cases, most of these tests were
failing without the fixes implemented here.
Different options are set as `feature`, also every possible plugin,
but this may cause confusion.
All options set as `feature` but plugins have been made `boolean` to
avoid further confusions.
`help2man` is also installed in the CI image because is required to
build different libraries.
We keep the 'WHITELIST-ONLY' filter type name still as an option in
--filter-policy=[POLICY], but deprecated and with the better
'ALLOWLIST-ONLY' replacement suggested from now on.
We let protocol implementations provide the uplink and downlink speeds
agreed with the network as part of the connect result, and we then move
them to the bearer stats in DBus.
Aleksander Morgado
Jakob Hauser
Frederic Martinsons
Matthew Via
som
Prakash Pabba
Daniele Palmas
Iñigo Martínez