The +CGEV indications allow us to get notified of packet domain
events like network-initiated or ME-initiated disconnections on
specific connected contexts, as well as full PS detach events (all
contexts disconnected). If the modem supports these indications, we
will enable them with +CGEREP and will then process them when they are
emitted by the modem.
If a full PS detach event happens, we will explicitly disconnect all
connected bearers.
If a deactivation inidication is received for a single context, we
will look for the associated bearer by CID and explicitly disconnect
it.
This patch adds a mm_bcd_to_string() helper function to convert a byte
array representing a binary-coded decimal (BCD) number to a string
representing the equivalent decimal number.
Devices like the Netgear AC313U require explicit context monitoring,
otherwise the device may end up disconnected internally and MM would
still think that the connection is ongoing.
Devices will expect SUPL server given as either IP:PORT or FQDN:PORT,
so just avoid saying we require a 'URL' because it's not true.
We will use a new helper method to parse and validate user-provided
SUPL server address.
The +CEMODE command is defined in 3GPP TS 27.007 (e.g. in section
10.1.28 in v11.0.0). This command allows querying or updating the
current UE mode, as well as checking the supported modes.
We implement support for loading the current mode and updating it. It
is assumed that the device does any additional operation needed by the
setting update, e.g. un-registering from CS when selecting an EPS-only
mode.
During modem initialization we detected the flow control settings
supported by the modem, and selected the best one to use from them,
notifying it to the device via AT+IFC. The device was therefore
instructed to use that flow control setting for data transmission in
the TTY (i.e. not during AT control commands).
The missing thing was to also configure ourselves our end of the
serial port with the same flow control settings when getting into data
mode. By doing it ourselves, we avoid requiring any explicit setting
in pppd for flow control; pppd can assume the flow control settings
are already the expected ones.
Worth noting that all this setup is completely ignored for TTYs
exposed directly via USB.
https://bugs.freedesktop.org/show_bug.cgi?id=100394
Instead of having the parser return separate list of supported flow
controls for TE and TA, we simplify it by only returning those
settings that apply to both TE and TA.
This logic isn't perfect either, though, as some settings (e.g. '3' in
TE in some modems, specifying a different XON/XOFF behavior) may not
have a corresponding setting in the other end.
The most common cases we care about (i.e. standard XON/XOFF, RTS/CTS)
should be properly reported with this logic.
The operator code (MCCMNC) may also be given encoded in the current
charset (e.g. UCS2).
Based on a patch from Colin Helliwell <colin.helliwell@ln-systems.com>
u-blox modems will append a string showing the MCC and MNC info to the access
point name listed in AT+CGDCONT? responses. We will try to detect when that
happens, and we just accept the match.
The logic doesn't just look for a string prefix; it also looks for the special
MCC + MNC suffix, which is much more restrictive, to try to avoid false
positives.
Split into two different actions the actual COPS? response parsing and the
operator name normalization process.
Also, allow parsing not only the operator string, but also the format, mode
and the optional access technology value.
* Add new async virtual method init_current_storages to
MMIfaceModemMessaging
* Add logic of init_current_storages to MMBroadbandModem
* Add step "INIT_CURRENT_STORAGES" in MMIfaceModemMessaging
initialization in order to load and store current SMS
storages for mem1 and mem2.
* Add usage of current sms storage value for mem1 in place
of an empty string parameter when the command AT+CPMS
is used.
https://bugs.freedesktop.org/show_bug.cgi?id=93135
We were trying to load the generic modes supported reported by either *CNTI=2 or
AT+WS46=?, so that then we could filter out the MBM-specific modes unsupported.
But, this may not be ideal, as both these two commands may fail:
[mm-broadband-modem.c:1612] modem_load_supported_modes(): loading supported modes...
[mm-port-serial.c:1237] mm_port_serial_open(): (ttyACM1) device open count is 3 (open)
[mm-port-serial.c:1294] _close_internal(): (ttyACM1) device open count is 2 (close)
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): --> 'AT*CNTI=2<CR>'
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): <-- '<CR><LF>ERROR<CR><LF>'
[mm-serial-parsers.c:364] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
[mm-broadband-modem.c:1546] supported_modes_cnti_ready(): Generic query of supported 3GPP networks with *CNTI failed: 'Unknown error'
[mm-port-serial.c:1237] mm_port_serial_open(): (ttyACM1) device open count is 3 (open)
[mm-port-serial.c:1294] _close_internal(): (ttyACM1) device open count is 2 (close)
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): --> 'AT+WS46=?<CR>'
[mm-port-serial-at.c:440] debug_log(): (ttyACM1): <-- '<CR><LF>ERROR<CR><LF>'
[mm-serial-parsers.c:364] mm_serial_parser_v1_parse(): Got failure code 100: Unknown error
[mm-broadband-modem.c:1494] supported_modes_ws46_test_ready(): Generic query of supported 3GPP networks with WS46=? failed: 'Unknown error'
[mm-iface-modem.c:3974] load_supported_modes_ready(): couldn't load Supported Modes: 'Couldn't retrieve supported modes'
Instead, we'll ask the modem for the list of modes supported, and return that
directly.
Variability in the response style from certain modems causes the parsing
of the +CGMR response to fail. For example, the Telit HE910 inserts an
empty string ("") in the second field of the response, causing the
sscanf implementation to fail.
This patch converts the parsing of the CGMR response to a regex that
allows for more flexibility and robustness, and adds unit tests around
the parsing call.
Signed-off-by: Nick Stevens <Nick.Stevens@digi.com>
This response is already managed by the generic AT serial port and translates
it into a proper error. This change also avoids the Call.Start() call to report
a timeout in the serial port, instead we get a proper no-carrier error.
Before:
$ sudo mmcli -m 0 --voice-create-call="number=12345678"
Successfully created new call:
/org/freedesktop/ModemManager1/Call/1 outgoing (unknown)
$ sudo mmcli -o 1 --start
error: couldn't start the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Serial.ResponseTimeout: Serial command timed out'
After:
$ sudo mmcli -m 0 --voice-create-call="number=12345678"
Successfully created new call:
/org/freedesktop/ModemManager1/Call/1 outgoing (unknown)
$ sudo mmcli -o 1 --start
error: couldn't start the call: 'GDBus.Error:org.freedesktop.ModemManager1.Error.Connection.NoCarrier: No carrier'
This patch modifies mm_3gpp_parse_iccid() to auto-detect if an ICCID
response is character swapped or not by comparsing the major industry
identifier part of the ICCID response to the known value (89) for
telecommunication purposes. This addresses the issue where the same AT
command (e.g. AT^ICCID used by the huawei plugin) does not report ICCID
in a consistent format.
And also make it a list of masks, specifying which are the specific combinations
supported, not just one mask with all.
E.g.:
-------------------------
Hardware | manufacturer: 'Sierra Wireless, Incorporated'
| model: 'MC7710'
| revision: 'SWI9200X_03.05.19.04ap r5475 carmd-en-10527 2012/09/17 17:57:14'
| supported: 'gsm-umts
| gsm-umts, lte'
| current: 'gsm-umts, lte'
| equipment id: '358178040668164'
The GetNetworkTime() response is defined to be an ISO8601 string, which
is in turn defined to be in local time. Make sure that's reflected in
the documentation, and append the timezone offset to UTC where we have
it.
Oddly, Icera devices return their time info in UTC with an offset to
the local timezone, so we have to jump through some hoops there to
convert the response to localtime based on the reported offset.
Some additional fixes by Aleksander Morgado <aleksander@lanedo.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=697372
Pantech UMW190 modem uses a custom +CMGL response which includes only
three fields before the actual PDU, e.g:
+CMGL: <index>,<status>,<something>\r\n<PDU>
instead of what we had before:
+CMGL: <index>,<status>,<alpha>,<length>\r\n<PDU>
The CMGL parsing logic is now updated to use a regex to match the reply, and
also considering the UMW190 specific case.
Actually, we end up reading only the two first fields (index and status) which
are the ones we really need, so we skip the <length> and the <alpha> if given.
Added also unit tests to cover all these known cases.
Partially fixes https://bugzilla.gnome.org/show_bug.cgi?id=696723 (missing the
actual PDU parsing fixes).
+GSN response differs widely between modems. Some prefix the
MEID and/or ESN with 0x, some have leading zeros, some return the
MEID and the ESN, and some append the serial number to the end of
the IMEI. Handle that and make the ESN, MEID, IMEI, and
EquipmentIdentifier parsing consistent.
This patch adds the support for solicited/unsolicited EPS network
registration status via AT+CEREG, which is configurable via the
'iface-modem-3gpp-eps-network-supported' property of the
MMIfaceModem3gpp interface and is disabled by default.
In QMI modems the logic behind supported and current bands is completely
separated in different services (DMS vs NAS). Actually, the list reported by NAS
as current band preferences seems to include more values than the ones reported
by DMS as supported bands (e.g. CDMA bands are reported even if the firmware
image is GSM/HSPA only).
So, just clean up the list of current preferred bands so that no more than those
given as supported is used.
Some devices, e.g. ZTE MF820D, seem to prefix the `AT+CGMM?' response with the
`+CGMM:' string, resulting in the following model string being loaded:
model: '+CGMM: "MF820D"'
Avoid this by:
1) Removing the expected prefixes.
2) Unquoting the resulting string.
Reported by: Marius Kotsbak <marius.kotsbak@gmail.com>
Aleksander Morgado
Ben Chan
Paul Bartell
Alfonso Sánchez-Beato
Colin Helliwell
Carlo Lobrano
Thomas Sailer
Nick Stevens
Marco Bascetta
Riccardo Vangelisti
Jason Simmons
Dan Williams
Aleksander Morgado