Dan Williams
7c70ad55bb
Main changes are cleaning up the API and allowing for multi-mode devices that support two or more of CDMA/EVDO, GSM/UMTS, and LTE at the same time. This provides a starting discussion point for the new MM 0.6 API.
602 lines
24 KiB
XML
602 lines
24 KiB
XML
<?xml version="1.0" encoding="UTF-8" ?>
|
||
|
||
<node name="/" xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0">
|
||
<interface name="org.freedesktop.ModemManager1.Modem">
|
||
|
||
<!-- METHODS -->
|
||
|
||
<method name="Enable">
|
||
<tp:docstring>
|
||
Enable or disables the modem. When enabled, the modem's radio is powered
|
||
on and data sessions, voice calls, location services, and Short Message
|
||
Service may be available. When disabled, the modem enters low-power
|
||
state and no network-related operations are available.
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_enable"/>
|
||
<arg name="enable" type="b" direction="in">
|
||
<tp:docstring>
|
||
Pass True to enable the modem, or False to disable it.
|
||
</tp:docstring>
|
||
</arg>
|
||
</method>
|
||
|
||
<method name="ListBearers">
|
||
<tp:docstring>
|
||
List configured packet data bearers (EPS Bearers, PDP Contexts, or
|
||
CDMA2000 Packet Data Sessions).
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_list_bearers"/>
|
||
<arg name="bearers" type="ao" direction="out">
|
||
<tp:docstring>
|
||
The list of bearer object paths.
|
||
</tp:docstring>
|
||
</arg>
|
||
</method>
|
||
|
||
<method name="CreateBearer">
|
||
<tp:docstring>
|
||
Create a new packet data bearer using the given characteristics. This
|
||
request may fail if the modem does not support additional bearers, if
|
||
too many bearers are already defined, or if properties are invalid.
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_create_bearer"/>
|
||
<arg name="properties" type="a{sv}" direction="in">
|
||
<tp:docstring>
|
||
List of properties to assign to the bearer after creating it. Some
|
||
properties are only applicable to a bearer of certain access
|
||
technologies, for example the "apn" property is not applicable to
|
||
CDMA2000 Packet Data Session bearers. Allowed properties are:
|
||
|
||
apn : (3GPP, required) Access Point Name
|
||
ip-type : (3GPP and CMDA, optional) Addressing type, one of
|
||
"IPV4", "IPV4V6", or "IPV6"
|
||
user : (3GPP, optional) user name (if any) required by the network
|
||
password : (3GPP, optional) password (if any) required by the network
|
||
number : (POTS, required) telphone number to dial
|
||
|
||
** FIXME: how about QoS?
|
||
</tp:docstring>
|
||
</arg>
|
||
</method>
|
||
|
||
<method name="DeleteBearer">
|
||
<tp:docstring>
|
||
Delete an existing packet data bearer.
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_delete_bearer"/>
|
||
<arg name="bearer" type="o" direction="in">
|
||
<tp:docstring>
|
||
Object path of the bearer to delete. If the bearer is currently
|
||
active and providing packet data server, it will be disconnected
|
||
and that packet data service will terminate.
|
||
</tp:docstring>
|
||
</arg>
|
||
</method>
|
||
|
||
<method name="GetInfo">
|
||
<tp:docstring>
|
||
Retrieve modem information, like the manufacturer, hardware version,
|
||
firmware version, etc.
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_get_info"/>
|
||
<arg name="info" type="a{sv}" direction="out">
|
||
<tp:docstring>
|
||
Dictionary containing various information about the modem, including
|
||
zero or more of the following items:
|
||
|
||
manufacturer : (string)
|
||
model : (string)
|
||
version/revision : (string)
|
||
</tp:docstring>
|
||
</arg>
|
||
</method>
|
||
|
||
<method name="Reset">
|
||
<tp:docstring>
|
||
Clear non-persistent configuration and state, and return the device to
|
||
a newly-powered-on state. This command may power-cycle the device.
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_reset"/>
|
||
</method>
|
||
|
||
<method name="FactoryReset">
|
||
<tp:docstring>
|
||
Clear the modem's configuration (including persistent configuration and
|
||
state), and return the device to a factory-default state. This command
|
||
may or may not power-cycle the device.
|
||
</tp:docstring>
|
||
<annotation name="org.freedesktop.DBus.GLib.Async" value=""/>
|
||
<annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_modem_factory_reset"/>
|
||
<arg name="code" type="s" direction="in">
|
||
Carrier-supplied code required to reset the modem. Ignored if not required.
|
||
</arg>
|
||
</method>
|
||
|
||
<!-- SIGNALS -->
|
||
|
||
<signal name="StateChanged">
|
||
<tp:docstring>
|
||
The modem's state (see the State property) changed.
|
||
</tp:docstring>
|
||
<arg name="old" type="u">
|
||
<tp:docstring>Old state</tp:docstring>
|
||
</arg>
|
||
<arg name="new" type="u">
|
||
<tp:docstring>New state</tp:docstring>
|
||
</arg>
|
||
<arg name="reason" type="u" tp:type="MM_MODEM_STATE_CHANGED_REASON">
|
||
<tp:docstring>Reason for this state change</tp:docstring>
|
||
</arg>
|
||
</signal>
|
||
|
||
<!-- PROPERTIES -->
|
||
|
||
<property name="ModemCapabilities" type="u" access="read" tp:type="MM_MODEM_CAPABILITIES">
|
||
<tp:docstring>
|
||
The generic family of access technologies the modem supports. Not all
|
||
capabilities are available at the same time however; some modems require
|
||
a firmware reload or other reinitialization to switch between eg CDMA/EVDO
|
||
and GSM/UMTS.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="CurrentCapabilities" type="u" access="read" tp:type="MM_MODEM_CAPABILITIES">
|
||
<tp:docstring>
|
||
The generic family of access technologies the modem currently supports
|
||
without a firmware reload or reinitialization.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="MaxBearers" type="u" access="read">
|
||
<tp:docstring>
|
||
The maximum number of defined packet data bearers the modem supports.
|
||
This is not the number of active/connected bearers the modem supports,
|
||
but simply the number of bearers that may be defined at any given time.
|
||
For example, POTS and CDMA2000-only devices support only one bearer,
|
||
while GSM/UMTS devices typically support three or more, and any
|
||
LTE-capable device (whether LTE-only, GSM/UMTS-capable, and/or
|
||
CDMA2000-capable) also typically support three or more.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="MaxActiveBearers" type="u" access="read">
|
||
<tp:docstring>
|
||
The maximum number of active packet data bearers the modem supports.
|
||
POTS and CDMA2000-only devices support one active bearer, while
|
||
GSM/UMTS and LTE-capable devices (including LTE/CDMA devices) typically
|
||
support at least two active bearers.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="DeviceIdentifier" type="s" access="read">
|
||
<tp:docstring>
|
||
A best-effort device identifier based on various device information like
|
||
model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties.
|
||
This ID is not guaranteed to be unique and may be shared between
|
||
identical devices with the same firmware, but is intended to be
|
||
"unique enough" for use as a casual device identifier for various
|
||
user experience operations. This is not the device's IMEI or ESN since
|
||
those may not be available before unlocking the device via a PIN.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="Device" type="s" access="read">
|
||
<tp:docstring>
|
||
The physical modem device reference (ie, USB, PCI, PCMCIA device), which
|
||
may be dependent upon the operating system. In Linux for example, this
|
||
points to a sysfs path of the usb_device object.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="Driver" type="s" access="read">
|
||
<tp:docstring>
|
||
The Operating System device driver handling communication with the
|
||
modem hardware.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="EquipmentIdentifier" type="s" access="read">
|
||
<tp:docstring>
|
||
The identity of the device. This will be the IMEI number for
|
||
GSM devices and the hex-format ESN/MEID for CDMA devices.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="UnlockRequired" type="s" access="read">
|
||
<tp:docstring>
|
||
Empty if the device is usable without an unlock code or has already
|
||
been unlocked. If the device needs to be unlocked before becoming usable this
|
||
property contains the specific unlock code required. Valid unlock code values
|
||
are "" (blank), "sim-pin", "sim-puk", "ph-sim-pin", "ph-fsim-pin",
|
||
"ph-fsim-puk", "sim-pin2", "sim-puk2", "ph-net-pin", "ph-net-puk",
|
||
"ph-netsub-pin", "ph-netsub-puk", "ph-sp-pin", "ph-sp-puk", "ph-corp-pin", and
|
||
"ph-corp-puk".
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="UnlockRetries" type="u" access="read">
|
||
<tp:docstring>
|
||
The number of unlock retries remaining for the unlock code given by the property UnlockRequired, or 999 if
|
||
the device does not support reporting unlock retries.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="State" type="u" access="read" tp:type="MM_MODEM_STATE">
|
||
<tp:docstring>
|
||
Overall state of the modem.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="AccessTechnology" type="u" access="read" tp:type="MM_MODEM_ACCESS_TECH">
|
||
<tp:docstring>
|
||
The current network access technology used by the device to communicate
|
||
with the network. (Note to plugin writers: if the device's access
|
||
technology cannot be determined, use UNKNOWN)
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="SignalQuality" type="u" access="read">
|
||
<tp:docstring>
|
||
Signal quality in percent (0 - 100) of the dominant access technology
|
||
the device is using to communicate with the network. Always 0 for POTS
|
||
devices.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="AllowedMode" type="u" access="readwrite" tp:type="MM_MODEM_ALLOWED_MODE">
|
||
<tp:docstring>
|
||
The allowed access technologies (eg 2G/3G/4G preference) the device is
|
||
allowed to use when connecting to a network. For POTS devices, only
|
||
the "any" mode is supported.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="SupportedModes" type="u" access="read" tp:type="MM_MODEM_ALLOWED_MODE">
|
||
<tp:docstring>
|
||
Access technology selection modes supported by the device.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="AllowedBands" type="t" access="readwrite" tp:type="MM_MODEM_BAND">
|
||
<tp:docstring>
|
||
The allowed radio frequency and technology bands the device may use when
|
||
allowed to use when connecting to a network. For POTS devices, only
|
||
the "any" mode is supported.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<property name="SupportedBands" type="t" access="read" tp:type="MM_MODEM_BAND">
|
||
<tp:docstring>
|
||
Radio frequency and technology bands supported by the device.
|
||
</tp:docstring>
|
||
</property>
|
||
|
||
<!-- ENUMS -->
|
||
|
||
<tp:flags name="MM_MODEM_CAPABILITIES" value-prefix="MM_MODEM_CAPABILITY" type="u">
|
||
<tp:docstring>
|
||
Flags describing one or more of the general access technology families
|
||
that a modem supports.
|
||
</tp:docstring>
|
||
<tp:flag suffix="NONE" value="0x0">
|
||
<tp:docstring>Modem has no capabilties.</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="POTS" value="0x1">
|
||
<tp:docstring>
|
||
Modem supports the analog wired telephone network (ie 56k dialup) and
|
||
does not have wireless/cellular capabilities.
|
||
</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_EVDO" value="0x2">
|
||
<tp:docstring>
|
||
Modem supports at least one of CDMA 1xRTT, EVDO revision 0, EVDO
|
||
revision A, or EVDO revision B.
|
||
</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="GSM_UMTS" value="0x4">
|
||
<tp:docstring>
|
||
Modem supports at least one of GSM, GPRS, EDGE, UMTS, HSDPA, HSUPA, or
|
||
HSPA+ packet switched data capability.
|
||
</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="LTE" value="0x8">
|
||
<tp:docstring>
|
||
Modem has at LTE data capability.
|
||
</tp:docstring>
|
||
</tp:flag>
|
||
</tp:flags>
|
||
|
||
<tp:enum name="MM_MODEM_STATE" type="u">
|
||
<tp:enumvalue suffix="UNKNOWN" value="0">
|
||
<tp:docstring>
|
||
State unknown or not reportable.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="DISABLED" value="10">
|
||
<tp:docstring>
|
||
The modem is not enabled and is powered down.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="DISABLING" value="20">
|
||
<tp:docstring>
|
||
The modem is current transitioning to the DISABLED state.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="ENABLING" value="30">
|
||
<tp:docstring>
|
||
The modem is currently transitioning to the ENABLED state.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="ENABLED" value="40">
|
||
<tp:docstring>
|
||
The modem is enabled and powered on but not registered with a network
|
||
provider and not available for data connections.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="SEARCHING" value="50">
|
||
<tp:docstring>
|
||
The modem is searching for a network provider to register with.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="REGISTERED" value="60">
|
||
<tp:docstring>
|
||
The modem is registered with a network provider, and data connections
|
||
and messaging may be available for use.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="DISCONNECTING" value="70">
|
||
<tp:docstring>
|
||
The modem is disconnecting and deactivating the last active packet
|
||
data bearer. This state will not be entered if more than one packet
|
||
data bearer is active and one of the active bearers is deactivated.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="CONNECTING" value="80">
|
||
<tp:docstring>
|
||
The modem is activating and connecting the first packet data bearer.
|
||
Subsequent bearer activations when another bearer is already active
|
||
do not cause this state to be entered.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="CONNECTED" value="90">
|
||
<tp:docstring>
|
||
One or more packet data bearers is active and connected.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
</tp:enum>
|
||
|
||
<tp:enum name="MM_MODEM_STATE_CHANGED_REASON" type="u">
|
||
<tp:enumvalue suffix="UNKNOWN" value="0">
|
||
<tp:docstring>
|
||
Reason unknown or not reportable.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="USER_REQUESTED" value="1">
|
||
<tp:docstring>
|
||
State change was requested by an interface user.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="SUSPEND" value="2">
|
||
<tp:docstring>
|
||
State change was caused by a system suspend.
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
</tp:enum>
|
||
|
||
<tp:enum name="MM_MODEM_ACCESS_TECH" type="u">
|
||
<tp:docstring>
|
||
Describes various access technologies that a device uses when registered
|
||
with or connected to a network.
|
||
</tp:docstring>
|
||
<tp:enumvalue suffix="UNKNOWN" value="0">
|
||
<tp:docstring>The access technology used is unknown</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="POTS" value="1">
|
||
<tp:docstring>Analog wireline telephone</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="GSM" value="2">
|
||
<tp:docstring>GSM</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="GSM_COMPACT" value="3">
|
||
<tp:docstring>Compact GSM</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="GPRS" value="4">
|
||
<tp:docstring>GPRS</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="EDGE" value="5">
|
||
<tp:docstring>EDGE (ETSI 27.007: "GSM w/EGPRS")</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="UMTS" value="6">
|
||
<tp:docstring>UMTS (ETSI 27.007: "UTRAN")</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="HSDPA" value="7">
|
||
<tp:docstring>HSDPA (ETSI 27.007: "UTRAN w/HSDPA")</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="HSUPA" value="8">
|
||
<tp:docstring>HSUPA (ETSI 27.007: "UTRAN w/HSUPA")</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="HSPA" value="9">
|
||
<tp:docstring>HSPA (ETSI 27.007: "UTRAN w/HSDPA and HSUPA")</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="HSPA_PLUS" value="10">
|
||
<tp:docstring>HSPA+ (ETSI 27.007: "UTRAN w/HSPA+")</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="1XRTT" value="11">
|
||
<tp:docstring>CDMA2000 1xRTT</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="EVDO0" value="12">
|
||
<tp:docstring>CDMA2000 EVDO revision 0</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="EVDOA" value="13">
|
||
<tp:docstring>CDMA2000 EVDO revision A</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="EVDOB" value="14">
|
||
<tp:docstring>CDMA2000 EVDO revision B</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="LTE" value="15">
|
||
<tp:docstring>LTE (ETSI 27.007: "E-UTRAN")</tp:docstring>
|
||
</tp:enumvalue>
|
||
</tp:enum>
|
||
|
||
<tp:enum name="MM_MODEM_ALLOWED_MODE" type="u">
|
||
<tp:docstring>
|
||
Describes the device's current access mode preference; ie the specific
|
||
technology preferences the device is allowed to use when connecting to
|
||
a network. Also used as a bitfield to indicate which allowed modes
|
||
the modem supports when setting the mode preference.
|
||
</tp:docstring>
|
||
<tp:enumvalue suffix="ANY" value="0x0000">
|
||
<tp:docstring>
|
||
Any mode can be used (only this value allowed for POTS modems)
|
||
</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="2G_PREFERRED" value="0x0001">
|
||
<tp:docstring>Prefer 2G (GPRS or EDGE)</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="3G_PREFERRED" value="0x0002">
|
||
<tp:docstring>Prefer 3G (UMTS or HSxPA)</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="4G_PREFERRED" value="0x0004">
|
||
<tp:docstring>Prefer 4G (LTE)</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="2G_ONLY" value="0x0100">
|
||
<tp:docstring>Use only 2G (GPRS or EDGE)</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="3G_ONLY" value="0x0200">
|
||
<tp:docstring>Use only 3G (UMTS or HSxPA)</tp:docstring>
|
||
</tp:enumvalue>
|
||
<tp:enumvalue suffix="4G_ONLY" value="0x0400">
|
||
<tp:docstring>Use only 4G (LTE)</tp:docstring>
|
||
</tp:enumvalue>
|
||
<!-- FIXME: what about 3G/4G only? or 2G/3G only? Should this be a
|
||
bitfield? If so, do we need to indicate what combinations the
|
||
modem supports?
|
||
-->
|
||
</tp:enum>
|
||
|
||
<tp:flags name="MM_MODEM_BAND" value-prefix="MM_MODEM_BAND" type="u">
|
||
<tp:docstring>
|
||
A 64-bit wide bitfield describing the specific radio bands supported by
|
||
the device and the radio bands the device is allowed to use when
|
||
connecting to a mobile network.
|
||
</tp:docstring>
|
||
<tp:flag suffix="UNKNOWN" value="0x0">
|
||
<tp:docstring>Unknown or invalid band</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="ANY" value="0x1">
|
||
<tp:docstring>For certain operations, allow the modem to select a band automatically.</tp:docstring>
|
||
</tp:flag>
|
||
|
||
<!-- GSM/UMTS/3GPP bands -->
|
||
<tp:flag suffix="EGSM" value="0x2">
|
||
<tp:docstring>GSM/GPRS/EDGE 900 MHz</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="DCS" value="0x4">
|
||
<tp:docstring>GSM/GPRS/EDGE 1800 MHz</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="PCS" value="0x8">
|
||
<tp:docstring>GSM/GPRS/EDGE 1900 MHz</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="G850" value="0x10">
|
||
<tp:docstring>GSM/GPRS/EDGE 850 MHz</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U2100" value="0x20">
|
||
<tp:docstring>WCDMA 2100 MHz (Class I)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U1800" value="0x40">
|
||
<tp:docstring>WCDMA 3GPP 1800 MHz (Class III)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U17IV" value="0x80">
|
||
<tp:docstring>WCDMA 3GPP AWS 1700/2100 MHz (Class IV)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U800" value="0x100">
|
||
<tp:docstring>WCDMA 3GPP UMTS 800 MHz (Class VI)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U850" value="0x200">
|
||
<tp:docstring>WCDMA 3GPP UMTS 850 MHz (Class V)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U900" value="0x400">
|
||
<tp:docstring>WCDMA 3GPP UMTS 900 MHz (Class VIII)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U17IX" value="0x800">
|
||
<tp:docstring>WCDMA 3GPP UMTS 1700 MHz (Class IX)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U1900" value="0x1000">
|
||
<tp:docstring>WCDMA 3GPP UMTS 1900 MHz (Class II)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="U2600" value="0x2000">
|
||
<tp:docstring>WCDMA 3GPP UMTS 2600 MHz (Class VII, internal)</tp:docstring>
|
||
</tp:flag>
|
||
|
||
<!-- CDMA Band Classes (see 3GPP2 C.S0057-C) -->
|
||
<tp:flag suffix="CDMA_BC0_CELLULAR_800" value="0x0000000100000000">
|
||
<tp:docstring>CDMA Band Class 0 (US Cellular 850MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC1_PCS_1900" value="0x0000000200000000">
|
||
<tp:docstring>CDMA Band Class 1 (US PCS 1900MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC2_TACS" value="0x0000000400000000">
|
||
<tp:docstring>CDMA Band Class 2 (UK TACS 900MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC3_JTACS" value="0x0000000800000000">
|
||
<tp:docstring>CDMA Band Class 3 (Japanese TACS)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC4_KOREAN_PCS" value="0x0000001000000000">
|
||
<tp:docstring>CDMA Band Class 4 (Korean PCS)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC5_NMT450" value="0x0000002000000000">
|
||
<tp:docstring>CDMA Band Class 5 (NMT 450MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC6_IMT2000" value="0x0000004000000000">
|
||
<tp:docstring>CDMA Band Class 6 (IMT2000 2100MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC7_CELLULAR_700" value="0x0000008000000000">
|
||
<tp:docstring>CDMA Band Class 7 (Cellular 700MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC8_1800" value="0x0000010000000000">
|
||
<tp:docstring>CDMA Band Class 8 (1800MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC9_900" value="0x0000020000000000">
|
||
<tp:docstring>CDMA Band Class 9 (900MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC10_SECONDARY_800" value="0x0000040000000000">
|
||
<tp:docstring>CDMA Band Class 10 (US Secondary 800)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC11_PAMR_400" value="0x0000080000000000">
|
||
<tp:docstring>CDMA Band Class 11 (European PAMR 400MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC12_PAMR_800" value="0x0000100000000000">
|
||
<tp:docstring>CDMA Band Class 12 (PAMR 800MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC13_IMT2000_2500" value="0x0000200000000000">
|
||
<tp:docstring>CDMA Band Class 13 (IMT2000 2500MHz Expansion)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC14_PCS2_1900" value="0x0000400000000000">
|
||
<tp:docstring>CDMA Band Class 14 (More US PCS 1900MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC15_AWS" value="0x0000800000000000">
|
||
<tp:docstring>CDMA Band Class 15 (AWS 1700MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC16_US_2500" value="0x0001000000000000">
|
||
<tp:docstring>CDMA Band Class 16 (US 2500MHz)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC17_US_FLO_2500" value="0x0002000000000000">
|
||
<tp:docstring>CDMA Band Class 17 (US 2500MHz Forward Link Only)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC18_US_PS_700" value="0x0004000000000000">
|
||
<tp:docstring>CDMA Band Class 18 (US 700MHz Public Safety)</tp:docstring>
|
||
</tp:flag>
|
||
<tp:flag suffix="CDMA_BC19_US_LOWER_700" value="0x0008000000000000">
|
||
<tp:docstring>CDMA Band Class 19 (US Lower 700MHz)</tp:docstring>
|
||
</tp:flag>
|
||
</tp:flags>
|
||
|
||
</interface>
|
||
</node>
|