The BMI260 accelerometer in the OneXPlayer Super X is exposed through
the ACPI BMI0160 ID. Its X and Y axes do not match the built-in display
axes, and no firmware mount matrix is provided.
Add an exact vendor and product DMI match with the matrix verified on
the hardware. The matrix keeps the native landscape position normal and
maps both portrait rotations to the corresponding display orientation.
Tested with iio-sensor-proxy 3.8 and Mutter 49.7 in all display
orientations. The compiled hwdb entry also matches the complete modalias
reported by the device.
Development of this patch used assistance from ChatGPT 5.6 sol.
into portrait mode.
The IMU is not active in lizard mode. The command below disables
lizard mode and activates the IMU.
echo N | sudo tee /sys/module/hid_steam/parameters/lizard_mode
Closes#42586
The WIN 5 (DMI product G1618-05) ships the same BMI0160
accelerometer with the same physical mounting as the Win Max 2
(G1619-04), so reuse its mount matrix. Verified on hardware:
without the matrix iio-sensor-proxy reports
AccelerometerOrientation=normal regardless of physical pose,
and applying the G1619-04 matrix makes orientation transitions
(normal / left-up / right-up / bottom-up) track the device
correctly.
Both devices have -90 degrees mounted panels but they don't have the
quirk in kernel.
The Pocket 4 has been researched and it has an acpi accel matrix that
works when setting panel orientation at boot parameter.
The Pocket 3 hasn't been tested, but given it didn't had panel
orientation quirk is for sure that matrix is wrong for it.
Actually is pending the quirks for both devices in kernel but eventually
they will get merged. Till that happens is encourage that owners of
these devices set panel orientation boot parameter to right-up.
Fixes: #41036.
Both devices have -90 degrees mounted panels but they don't have the
quirk in kernel.
The Pocket 4 has been researched and it has an acpi accel matrix that
works when setting panel orientation at boot parameter.
The Pocket 3 hasn't been tested, but given it didn't had panel
orientation quirk is for sure that matrix is wrong for it.
Actually is pending the quirks for both devices in kernel but eventually
they will get merged. Till that happens is encourage that owners of
these devices set panel orientation boot parameter to right-up.
Fixes: #41036.
Doing it made also to include the 14t-fh000, the product name initial
units of the omnibook ultra flip 14 had, this is intended.
Order the entries by product name.
Follow up: fadb0b53f7.
