We went back and forth between 'prog.sh', files('prog.sh'), and
find_program('prog.sh'). We want to use files() or find_program() so that we
get a good error message if the file is missing. Behaviour of meson changed
over time, and in the past not all forms could be used in all places. For
example 0f4c4f3824 added find_program() in many
places to avoid repeated messages. But it seems that all recent meson versions
work fine with files().
find_program prints silly messages:
Program tools/make-man-index.py found: YES
(/home/zbyszek/src/systemd/tools/make-man-index.py)
Program tools/meson-render-jinja2.py found: YES
(/home/zbyszek/src/systemd/tools/meson-render-jinja2.py)
...
We know that those files will be found, they are part of the git checkout.
With files() this is gone and the meson output is easier to read.
Allow for mDNS service/domain/types browsing.
A client can connect to the backend via varlink and receive updates as
the requested service becomes available.
The interval between the first two queries MUST be at least one second,
the intervals between successive queries MUST increase by at least a
factor of two.
When the interval between queries reaches or exceeds 60 minutes, a
querier MAY cap the interval to a maximum of 60 minutes, and perform
subsequent queries at a steady-state rate of one query per hour.
Cache maintenance performed by issuing queries at 80, 85, 90, 95% of the
TTL, and updating/removing the records depending on replies.
TODO:
Improve the DNS transaction logic when multiple clients subscribe to the
same service, ensuring that continuous queries are optimized.
<!-- devel-freezer =
{"comment-id":"1625154850","freezing-tag":"v256-rc2"} -->
Allow for mDNS service/domain/types browsing.
A client can connect to the backend via varlink and receive updates as the
requested service becomes available.
The interval between the first two queries MUST be at least one second,
the intervals between successive queries MUST increase by at least a factor of two.
When the interval between queries reaches or exceeds 60 minutes, a querier MAY cap
the interval to a maximum of 60 minutes, and perform subsequent queries at a
steady-state rate of one query per hour.
Delete expired cache entries one second after goodbye packet received
as per RFC6762 Section 10.1
Cache maintenance:
The querier should plan to issue a query at 80% of the record lifetime, and
then if no answer is received, at 85%, 90%, and 95%.
If an answer is received, then the remaining TTL is reset to the value given
in the answer, and this process repeats for as long as the Multicast DNS querier
has an ongoing interest in the record.
If no answer is received after four queries, the record is deleted when it
reaches 100% of its lifetime.
TODO:
Improve the DNS transaction logic when multiple clients subscribe to
the same service, ensuring that continuous queries are optimized.
Co-authored-by: Vishwanath Chandapur <vishwanath.chandapur@philips.com>
Prepare for mDNS browse services to facilitate scheduled cache
maintenance queries when browsing for services.
Introduce dns_answer_add_full() and dns_answer_add_extend_full()
to explicitly handle the 'until' argument, enabling fine-grained control
over the time property of DNS answers.
Ensure backward compatibility while providing the flexibility to
specify 'until' for specific cases when needed
Co-authored-by: Vishwanath Chandapur <vishwanath.chandapur@philips.com>
Prepare for upcoming mDNS browse services.
Distinguish between registered and discovered services to avoid confusion.
Co-authored-by: Vishwanath Chandapur <vishwanath.chandapur@philips.com>
- use STRV_MAKE() macro,
- add several missing assertions,
- use more suitable ASSERT_XYZ() macros,
- drop TEST(dns_search_domain_unlink_all), as it is already tested in
TEST(dns_search_domain_new_system_limit).
[1] says:
> Since 0.60.0 the name argument is optional and defaults to the basename of
> the first output
We specify >= 0.62 as the supported version, so drop the duplicate name in all cases
where it is the same as outputs[0], i.e. almost all cases.
[1] https://mesonbuild.com/Reference-manual_functions.html#custom_target
This is based on #35764 by Guruswamy Basavaiah, but covers further code
paths.
This ensures that when we initiate a TLS shutdown we'll write out our
own close_notify message, but not wait for the close_notify reply from
the server side anymore.
Replaces: #35764
When asked to look something up, and all scopes we contact fail we need
to pick a suitable error code for the failure, and given that we look up
things on multiple scopes we might have multiple errors to choose from.
So far we simply picked the error from the last scope in the list, which
hence would be pretty arbitrary.
Let's tweak this a bit, and if we have multiple errors to choose from,
let's prefer "conclusive" failures over "inconclusive" ones. The
"inconclusive" ones in this sense are the ones where we didn't even issue
a request, but couldn't even do that because we had no server, no
network or things like that. The "conclusive" ones are the errors we got
from a server, that hence a "real" in a way.
This addresses the confusion described in #37969. For LLMNR lookups we
generally refuse looking up A addresses via IPv6 and AAAA via IPv4. This
generates a DNS_TRANSACTION_NO_SERVERS error, which we would then return
for one type of lookup but not for the other, because the IPv6 scope is
generally created after the IPv4 one, and hence so far won.
Fixes: #37969
It's not sufficient to append a DNS key to a packet, we must also update
the qdcount too. We got this right in most tests but didn#t here.
Moreover, we must extract the packet then to actually have a DnsQuestion
properly filled in.
Fix that. Without this the tests didn't test anything reasonable.
More porting work to label_ops_pre()/label_ops_post()
This also enables labelling of the /etc/localtime symlink in
systemd-firstboot, which should address one small facet of #37857
We now consider link-local addresses routable when we have configured
unicast link-local dns servers. This allows creating the DNS scope, even
when the interface doesn't get a routable address.
Previously, the extra stub listners were stopped but new ones were not
started. Also, the main stub listners were not restarted, hence the
new settings were not applied. This fixes the above two issues.
Note, to fix the issue, we need to keep CAP_NET_BIND_SERVICE capability
to make it allow to bind stub listner later.
Fixes#37843.
- set defaults after all existing configs and setups cleared,
- mention failures are ignored in log messages,
- drop one redundant log message,
- do not return negative errno but exit event loop on critical failure.
mDNS replies always have to come from the mDNS port (unlike mDNS
queries, which are also allowed from non-mDNS ports). Hence refuse this.
Fixes: #33806
Let's also show A/AAAA data in binary form if --raw=payload is used. For
these RR types there's only a single data field, hence it's obbviously
meant.
Inspired by: #37737
git grep -l 'Failed to open /'|xargs sed -r -i 's|"Failed to open (/[^ ]+): %m"|"Failed to open %s: %m", "\1"|g'
git grep -l $'Failed to open \'/'|xargs sed -r -i $'s|"Failed to open \'(/[^ ]+)\': %m"|"Failed to open %s: %m", "\\1"|g'
git grep -l "Failed to open /"|xargs sed -r -i $'s|"Failed to open (/[^ ]+), ignoring: %m"|"Failed to open %s, ignoring: %m", "\\1"|g'
+ some manual fixups.
clang-include-cleaner has a hard time figuring out unused includes
with all the macro string concatentation we're doing in test_table().
Let's help it out a little by also passing the enum type into test_table().
While technically not needed, this makes the tests a bit more self-descriptive
and not really much more verbose so it feels like a good chance regardless,
even if the primary purpose is to help clang-include-cleaner figure out
used and unused includes.
constants.h defines a bunch of constants that use macros from
time-util.h, so add the needed include. To avoid cyclic dependencies,
we move the HAS_FEATURE_MEMORY_SANITIZER and HAS_FEATURE_ADDRESS_SANITIZER
logic to macro.h and get rid of the constants.h include there.
The rest of this commit is adding missing constants.h includes where
needed due to it being removed from macro.h.
Let's handle the per-link and the global dns server/search domain
property parsing the same. Let's use a flags field for three separate
booleans, and unify more code.
This permits configuration of additional "delegates" which ensure that
lookups for certain DNS zones are routed to specific sets of DNS
servers, in addition to the routes we create for each network interface.
For now, this allows only static configuration, but eventually we should
open this up to IPC.
Fixes: #5573#14159#20485#21260#24532#32022
(Fixes#32022, because now redundant)
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Vishal Chillara SrinivasandVishwanath Chandapur
DaanDeMeyer
Lennart Poettering
George Tsiamasiotis
Jelle van der Waa