So far we already had the CopyFiles= option in systemd-repart drop-in
files, as a mechanism for populating freshly formatted file systems with
files and directories. This adds MakeDirectories= in similar style, and
creates simple directories as listed. The option is of course entirely
redundant, since the same can be done with CopyFiles= simply by copying
in a directory. It's kinda nice to encode the dirs to create directly in
the drop-in files however, instead of providing a directory subtree to
copy in somehere, to make the files more self-contained — since often
just creating dirs is entirely sufficient.
The main usecase for this are GPT OS images that carry only a /usr/
tree, and for which a root file system is only formatted on first boot
via repart. Without any additional CopyFiles=/MakeDirectories=
configuration these root file systems are entirely empty of course
initially. To mount in the /usr/ tree, a directory inode for /usr/ to
mount over needs to be created. systemd-nspawn will do so automatically
when booting up the image, as will the initrd during boot. However, this
requires the image to be writable – which is OK for npawn and
initrd-based boots, but there are plenty tools where read-only operation
is desirable after repart ran, before the image was booted for the first
time. Specifically, "systemd-dissect" opens the image in read-only to
inspect its contents, and this will only work of /usr/ can be properly
mounted. Moreover systemd-dissect --mount --read-only won't succeed
either if the fs is read-only.
Via MakeDirectories= we now provide a way that ensures that the image
can be mounted/inspected in a fully read-only way immediately after
systemd-repart completed. Specifically, let's consider a GPT disk image
shipping with a file usr/lib/repart.d/50-root.conf:
[Partition]
Type=root
Format=btrfs
MakeDirectories=/usr
MakeDirectories=/efi
With this in place systemd-repart will create a root partition when run,
and add /usr and /efi into it as directory inods. This ensures that the
whole image can then be mounted truly read-only anf /usr and /efi can be
overmounted by the /usr partition and the ESP.
This is similar to the --image= switch in the other tools, like
systemd-sysusers or systemd-tmpfiles, i.e. it apply the configuration
from the image to the image.
This is particularly useful for downloading minimized GPT image, and
then extending it to the desired size via:
# systemd-repart --image=foo.image --size=5G
The commit 0b81225e57 makes that networkd
remove all foreign rules except those with "proto kernel".
But, in some situation, people may want to manage routing policy rules
with other tools, e.g. 'ip' command. To support such the situation,
this introduce ManageForeignRoutingPolicyRules= boolean setting.
Closes#19106.
There are two ambiguity in the original description:
1. It will delay all RUN instructions, include builtin.
2. It will delay before running RUN, not each of RUN{program} instructions.
- Handle BPFProgram= property in string format
"<bpf_attach_type>:<bpffs_path>", e.g. egress:/sys/fs/bpf/egress-hook.
- Add dbus getter to list foreign bpf programs attached to a cgroup.
create_fifo() was added in a2fc2f8dd3, and
would always ignore failure. The test was trying to fail in this case, but
we actually don't fail, which seems to be correct. We didn't notice before
because the test was ineffective.
To make things consistent, generally log at warning level, but don't propagate
the error. For symlinks, log at debug level, as before.
For 'e', failure is not propagated now. The test is adjusted to match.
I think warning is appropriate in most cases: we do not expect a device node to
be replaced by a different device node or even a non-device file. This would
most likely be an error somewhere. An exception is made for symlinks, which are
mismatched on purpose, for example /etc/resolv.conf. With this patch, we don't
get any warnings with the any of the 74 tmpfiles.d files, which suggests that
increasing the warning levels will not cause too many unexpected warnings. If
it turns out that there are valid cases where people have expected mismatches
for non-symlink types, we can always decrease the log levels again.
We didn't document this behaviour one way or another, so I think it's
OK to change. All callers do the NULL check before callling this to avoid
the assert warning, so it seems reasonable to do it internally.
sd_bus_can_send() is similar, but there we expressly say that an
error is returned on NULL, so I didn't change it.
Append 'package' and 'packageVersion' to the journal as discrete fields
COREDUMP_PKGMETA_PACKAGE and COREDUMP_PKGMETA_PACKAGEVERSION respectively,
and the full json blurb as COREDUMP_PKGMETA_JSON.
In some instances, particularly with swap on zram, swap used will be high
while there is still a lot of memory available. FB OOMD handles this by
thresholding kills to X% of total swap usage. Let's do the same thing here.
Anecdotally with these thresholds and my laptop which is exclusively swap
on zram I can sit at 0K / 4G swap free with most of memory free and
systemd-oomd doesn't kill anything.
Partially addresses aggressive kill behavior from
https://bugzilla.redhat.com/show_bug.cgi?id=1941170
The s390 PCI driver assigns the hotplug slot name from the
function_id attribute of the PCI device using a 8 char hexadecimal
format to match the underlying firmware/hypervisor notation.
Further, there's always a one-to-one mapping between a PCI
function and a hotplug slot, as individual functions can
hot plugged even for multi-function devices.
As the generic matching code will always try to parse the slot
name in /sys/bus/pci/slots as a positive decimal number, either
a wrong value might be produced for ID_NET_NAME_SLOT if
the slot name consists of decimal numbers only, or none at all
if a character in the range from 'a' to 'f' is encountered.
Additionally, the generic code assumes that two interfaces
share a hotplug slot, if they differ only in the function part
of the PCI address. E.g., for an interface with the PCI address
dddd:bb:aa.f, it will match the device to the first slot with
an address dddd:bb:aa. As more than one slot may have this address
for the s390 PCI driver, the wrong slot may be selected.
To resolve this we're adding a new naming schema version with the
flag NAMING_SLOT_FUNCTION_ID, which enables the correct matching
of hotplug slots if the device has an attribute named function_id.
The ID_NET_NAME_SLOT property will only be produced if there's
a file /sys/bus/pci/slots/<slotname> where <slotname> matches
the value of /sys/bus/pci/devices/.../function_id in 8 char
hex notation.
Fixes#19016
See also #19078
It was one giant all of text in pseudo-random order. Let's split it into
paragraphs talk about one subject each.
And unfortunately, the description of what happens when the error is not
set was not correct. In general, various functions treat 0/NULL as
not-an-error, and return 0.
Add an --extension parameter to portablectl, and new DBUS methods
to attach/detach/reattach/inspect.
Allows to append separate images on top of the root directory (os-release
will be searched in there) and mount the images using an overlay-like
setup (unit files will be searched in there) using the new ExtensionImages
service option.
This specifes two new optional fields for /etc/os-release:
IMAGE_VERSION= and IMAGE_ID= that are supposed to identify the image of
the current booted system by name and version.
This is inspired by the versioning stuff in
https://github.com/systemd/mkosi/pull/683.
In environments where pre-built images are installed and updated as a
whole the existing os-release version/distro identifier are not
sufficient to describe the system's version, as they describe only the
distro an image is built from, but not the image itself, even if that
image is deployed many times on many systems, and even if that image
contains more resources than just the RPMs/DEBs.
In particular, "mkosi" is a tool for building disk images based on
distro RPMs with additional resources dropped in. The combination of all
of these together with their versions should also carry an identifier
and version, and that's what IMAGE_VERSION= and IMAGE_ID= is supposed to
be.
This adds generic support for the SetCredential=/LoadCredential= logic
to our password querying infrastructure: if a password is requested by a
program that has a credential store configured via
$CREDENTIALS_DIRECTORY we'll look in it for a password.
The "systemd-ask-password" tool is updated with an option to specify the
credential to look for.
Let's make use of our own credentials infrastructure in our tools: let's
hook up systemd-sysusers with the credentials logic, so that the root
password can be provisioned this way. This is really useful when working
with stateless systems, in particular nspawn's "--volatile=yes" switch,
as this works now:
# systemd-nspawn -i foo.raw --volatile=yes --set-credential=passwd.plaintext-password:foo
For the first time we have a nice, non-interactive way to provision the
root password for a fully stateless system from the container manager.
Yay!
This allows "LoadCredentials=foo" to be used as shortcut for
"LoadCredentials=foo:foo", i.e. it's a very short way to inherit a
credential under its original name from the service manager into a
service.
Lennart Poettering
Jason Francis
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Anita Zhang
LetzteInstanz
Yegor Alexeyev
gaoyi
Julia Kartseva
Luca Boccassi
Morten Linderud
Viktor Mihajlovski
Carlo Teubner
Deepak Rawat
Henri Chain
David Tardon