The restriction requiring --empty= to be require, force, or create
when using --el-torito= is unnecessary.
context_verify_eltorito_overlap() already validates that the ISO 9660
blocks don't collide with GPT partition entries or the first usable
LBA, which is sufficient to guarantee safety regardless of the empty
mode.
This is needed for two-stage image builds where the first stage creates
the usr and verity partitions, and the second stage adds --el-torito=
to produce a bootable ISO with a UKI containing usrhash= derived from
the verity hash of the first stage. In the second stage, repart runs
with --empty=allow since the image already exists.
Co-developed-by: Claude Opus 4.6 <noreply@anthropic.com>
This only points the firmware to the ESP. The ISO9660 is empty.
The initramfs should create a loop device to change block size
and enable GPT partitions.
This was tested using OVMF on qemu, with:
`-drive if=pflash,file=OVMF_CODE.fd,readonly=on,format=raw -drive if=pflash,file=OVMF_VARS.fd,format=raw -drive if=none,id=live-disk,file=dick.iso,media=cdrom,format=raw,readonly=on -device virtio-scsi-pci,id=scsi -device scsi-cd,drive=live-disk`
And a simple definition:
```
[Partition]
Type=esp
Format=vfat
CopyFiles=/usr/lib/systemd/boot/efi/systemd-bootx64.efi:/EFI/BOOT/BOOTX64.EFI
```
Some shells will try to parse this, or expand it, causing an error. Lets
quote it so it's simpler for people.
Signed-off-by: Morten Linderud <morten@linderud.pw>
AllowDiscards= will set allow-discards in the persistent flags which will make
activating the device automatically activate with that option. This is
useful for devices discovered through gpt-auto-generator without
needing to use some kernel command line to set the option.
It's useful to be able to check what firmware description vmspawn
will select. In particular, this will allow me to figure out the
nvram template file that will be picked up so I can pick it up in
mkosi and operate on it to pass a modified version of it to vmspawn
with --efi-nvram-template=.
Add --efi-nvram-template=PATH to specify a custom firmware variables
file to copy and use as the initial EFI NVRAM state instead of the
default template from the firmware definition.
Add --firmware-features=FEATURE[,FEATURE...] to require or exclude
specific firmware features during automatic firmware discovery.
Features prefixed with "!" are excluded. If a feature appears in both
the included and excluded lists, inclusion takes priority. Firmware
with the "enrolled-keys" feature is excluded by default.
Refactor --secure-boot= to operate on the firmware features sets
instead of maintaining a separate tristate. --secure-boot=yes adds
"secure-boot" to the include set, --secure-boot=no adds it to the
exclude set, and --secure-boot=auto removes it from both.
Generalize find_ovmf_config() to accept include/exclude feature sets
instead of a secure boot tristate, removing the special-cased
enrolled-keys and secure-boot filtering logic.
Co-developed-by: Claude Opus 4.6 <noreply@anthropic.com>
This has been requested previously for PCR 7 (#40567), but let's do that
for all firmware owned PCRs, since some firmwares forget to measure
their own separator. Let's hence measure our own guranteed one.
Fixes: #40567
So far we always conditioned our TPM magic on the UKI having detected
TPM support in the firmware. This is a bit limiting when we want to
support a software TPM that is not visible to the firmware. Hence let's
split this up, and add a separate control that can be set via the kernel
command line. However, as before, let's by default inherit the firmare
TPM discovery state into it, to retain the current behaviour unless
overriden.
With this in place, boot with "systemd.tpm2_measured_os=1
systemd.tpm2_software_fallback=1" on the kernel cmdline to get the swtpm
fallback and then a measured OS based on it.
We want to start the software TPM fallback only if no real hw is
evailable and if the user opts-in to this behaviour. Add a generator
that drives all this, based on kernel command line configuration.
For TPM-less systems it's sometimes valuable to have a fill-in software
TPM running from early boot on, so that TPM-based functionality can
"just work" and rely on TPM semantics, even if it's at a substantially
weaker security level.
This adds a wrapper around swtpm. It's a binary that chainloads swtpm
but does a few preparatory steps and integrates into systemd's logic
otherwise.
All this is then exposed as systemd-tpm2-swtpm.service.
The service is not hooked into much yet, that is added in later commits.
We need to store state persistently for the software TPM (i.e. the root
key). But given that TPMs are generally used to unlock the rootfs, this
storage cannot be on the rootfs. Hence let's use the ESP instead, as the
next best thing, that is guaranteed to exist during early boot, given we
just were booted from it.
This defines automatic logic for this, but does not cause the ESP mount
job to be enqueued (since typically we don't actually want that
mounted), this is left for the actual services that needs to be done.
Note that the mount here is set up quite differently from the one from
the host: since initrds are short-lived anyway, it seemed pointless to
use autofs. Moreover this uses a fixed place to mount the ESP, inspired
by the /sysroot/ + /sysusr/ mount naming. All that to simplify things a
bit for the consumers (which is mostly swtpm)
This change aligns the behaviour of UKI generation with the behaviour
of BLS. The latter filters out lines starting with a #, allowing users
to add comments and/or temporarily remove some flags from the kernel
command line.
The kernel-install test have been adjusted to use a multiline cmdline
with a comment in it. Without this patch, the test fails.
The infrastructure added in the previous commits added support for IMDS
client functionality, but didn't really to enable the logic by default
on suitable hosts.
This commit adds a generator that automatically hooks the IMDS
functionality into the boot process if it detects that the system is
running on a compliant cloud system. it enables both the imds daemon and
the client.
This is a client tool to the systemd-imdsd@.service added in the
previous commit. It's mostly just a 1:1 IPC client via Varlink. It can
be used to query any IMDS key, but it's primary usecase is to acquire
the "userdata" from IMDS. Moreover, if invoked with the --import switch
it will check if the userdata contains a list of system credentials. If
so, it will import them into the local credstore. If the userdata does
not look like a list of system credentials no operation is executed,
under the assumption the data is intended for cloud-init instead.
It also imports a couple of other fields, if available and recogniuzed,
such as SSH keys and the hostname.
This service's job is to talk to a VM associated IMDS service provided
by the local Cloud. It tries to abstract the protocol differences
various IMDS implementations implement, but does *not* really try to
abstract more than a few basic fields of the actual IMDS metadata.
IMDS access is wrapped in a Varlink API that local clients can talk to.
If possible this makes use of the IMDS endpoint information that has
been added to hwdb in the preceeding commit. However, endpoint info can
also be provided via kernel command line and credentials. For debugging
purposes we also accept them via environment variables and command line
arguments.
This adds a concept of early-boot networking, just enough to be able to
talk to the IMDS service. It is minimally configurable via a kernel
cmdline option (and a build-time option): the user may choose between
"locked" and "unlocked" mode. In the former mode direct access to IMDS via
HTTPS is blocked via a prohibit route (and thus all IMDS communication
has to be done via systemd-imdsd@.service). In the latter case no such
lockdown takes place, and IMDS may be acquired both via this new service
and directly. The latter is typically a good idea for compatibility with
current systems, the former is preferable for secure installations.
Access to IMDS fields is controlled via PK.
A 10G Marvell AQC113 included in an ASRock TRX50WS motherboard NIC claims to
support tx/rx queues as large as 8184.
After boot 'ethtool -g eth0' outputs:
Ring parameters for eth0:
RX: 8184
RX Mini: n/a
RX Jumbo: n/a
TX: 8184
TX push buff len: n/a
HDS thresh: n/a
RX: 2048
RX Mini: n/a
RX Jumbo: n/a
TX: 4096
RX Buf Len: n/a
CQE Size: n/a
TX Push: off
RX Push: off
TX push buff len: n/a
TCP data split: n/a
HDS thresh: n/a
'ethtool --set-ring eth0 rx 8184 tx 8184 && ethtool -g eth0' yields:
Ring parameters for eth0:
RX: 8184
RX Mini: n/a
RX Jumbo: n/a
TX: 8184
TX push buff len: n/a
HDS thresh: n/a
RX: 8184
RX Mini: n/a
RX Jumbo: n/a
TX: 8184
RX Buf Len: n/a
CQE Size: n/a
TX Push: off
RX Push: off
TX push buff len: n/a
TCP data split: n/a
HDS thresh: n/a
I can measure a throughput difference between using using buffer sizes
4096 and 8184 on my hardware, so it really seems that this is doing
something beyond buggy firmware.
Original PR https://github.com/systemd/systemd/pull/17635 didn't give any
explanation for the limit of 4096, but that's probably what was supported by
the kernel drivers at the time.
A web search shows that CISCO VIC 15000 supports 16k, so allow up to that.
[zjs: edited the message]
vmspawn previously hardcoded virtio-blk for all drives. This adds
--image-disk-type= to select the root disk type (virtio-blk,
virtio-scsi, or nvme) and allows per-drive overrides via a
colon-separated prefix on --extra-drive=. The format and disk type
prefixes can appear in any order since their value sets don't overlap.
For virtio-scsi, a single shared controller is created with drives
attached as scsi-hd devices. For nvme, each drive gets its own
controller. Both have serial number length limits (30 and 20 characters
respectively), so long filenames are replaced with a truncated SHA-256
hex digest.
This is an extension of the /etc/hosts concept, but can provide any kind
of RRs (well, actually, we only parse A/AAAA/PTR for now, but the
concept is open for more).
Fixes: #17791
Extend --image-disk-type= and the --extra-drive= disk type prefix to
support nvme in addition to virtio-blk and virtio-scsi:
systemd-vmspawn --image-disk-type=nvme --image=image.raw
systemd-vmspawn --image=image.raw --extra-drive=nvme:data.raw
The NVMe serial number is limited to 20 characters by the NVMe spec.
If the image filename exceeds this, it is hashed with SHA-256 and
truncated to 20 hex characters via the disk_serial() helper introduced
in the previous commit.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add --image-disk-type= to select the disk type for the root disk, and
allow specifying the disk type as a colon-separated prefix on
--extra-drive=:
systemd-vmspawn --image-disk-type=virtio-scsi --image=image.raw
systemd-vmspawn --image=image.raw --extra-drive=virtio-scsi:data.raw
For --extra-drive=, the format and disk type prefixes can appear in any
order since the value sets don't overlap:
--extra-drive=raw:virtio-scsi:/path
--extra-drive=virtio-scsi:raw:/path
Extra drives inherit --image-disk-type= by default unless overridden
with an explicit prefix.
vmspawn originally used virtio-scsi for all drives but switched to
virtio-blk in 1f24a954e4 for simplicity and direct kernel boot
compatibility. This makes virtio-scsi available again as an explicit
option for cases where a SCSI storage topology is desired.
For virtio-scsi, a shared virtio-scsi-pci controller is created and
drives are attached as scsi-hd devices. The SCSI serial number is
limited to 30 characters, so filenames exceeding this are hashed with
SHA-256.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Typically, the top-level JSON object has to be an object, in any json
document we parse, hence let's add a simple way to enforce that.
Make use of this in various places.
(Note, various other JSON parsers insist on this logic right from the
beginning, but I actually thinking making this insisting optional like
this patch does it is the cleaner approach)
For the IMDS case there's value in being able to set the static
hostname, instead of just the transient one. Let's introduce
firstboot.hostname, which only applies to first boot, and write the
static hostname. This is different from system.hostname which applies to
any boot, and writes the transient hostname.
Add an optional field that can be used to store a user's birth date.
userdb already stores personal metadata (`emailAddress`, `realName`,
`location`) so `birthDate` is a natural fit.
Add a birthDate field to the JSON user record, stored internally as a
struct tm with INT_MIN/negative sentinels for unset fields. The field
is serialized as a YYYY-MM-DD string in JSON and validated via
parse_birth_date(), which shares its core logic with
parse_calendar_date() through a new parse_calendar_date_full()
function.
For birth dates, timegm() is called directly (rather than
mktime_or_timegm_usec) to support pre-epoch dates. The wday field is
used to distinguish timegm() failure from a valid (time_t) -1 return.
birthDate is excluded from user_record_self_modifiable_fields(), so
only administrators can set or change it via homectl. The field
remains in the regular (non-privileged) JSON section, keeping it
readable by the user and applications.
This option is exactly like the one in sysusers. (In fact the
implementation is copied too.) It is occasionally useful to be able to
specify and execute some tmpfiles config not through config files but
directly on the command line. This also makes it very easy to test
config with:
SYSTEMD_LOG_LEVEL=debug systemd-tmpfiles --dry-run --inline ...
If this new scheme of adding dependencies is supposed to be used more
widely we need to start making it easy to add them. So add a new
self-contained header that projects can simply include without the need
to link against libsystemd itself. This will allow them to generate
`.notes.dlopen` sections:
```
> readelf -p .note.dlopen ./l2md
String dump of section '.note.dlopen':
[ a] |@FDO
[ 10] [{"feature":"manifest-json","description":"Manifest-based change detection via gzip and JSON parsing","priority":"suggested","soname":["libz.so.1","libsystemd.so.0"]}]
[ c2] |@FDO
[ c8] [{"feature":"manifest-http","description":"HTTP transport for lore.kernel.org manifest fetch","priority":"suggested","soname":["libcurl.so.4"]}]
```
Add a --grain-size= CLI option to override the default 4 KiB partition
alignment grain. Setting --grain-size=1M matches the alignment used by
fdisk/parted and fixes misaligned partitions after small fixed-size
partitions like the 16 KiB verity-sig partition.
Also fix context_place_partitions() to re-align the start offset after
each partition, not just once per free area. Without this, a small
partition would cause all subsequent partitions in the same free area
to start at an unaligned offset.
Document the new public sd-dlopen.h header and SD_ELF_NOTE_DLOPEN()
macro with associated constants. Includes usage examples for single
and multiple soname annotations.
Signed-off-by: Christian Brauner <brauner@kernel.org>
and use dedicated knobs for every option used in
former SimpleConnectProperties.
New section is [MobileNetwork] with the following configuration options:
APN=
AllowedAuthenticationMechanisms==
User=
Password=
IPFamily=
AllowRoaming=
PIN=
OperatorId=
Adam Dinwoodie
Daan De Meyer
Valentin David
Morten Linderud
Lennart Poettering
Cynthia
Zbigniew Jędrzejewski-Szmek
Walter McKelvie
Christian Brauner
Luca Boccassi
Dylan M. Taylor
seaeunlee
Nandakumar Raghavan
Malcolm Frazier
Frantisek Sumsal
Oleksandr Andrushchenko