Commit Graph
1538 Commits
Author SHA1 Message Date
Luca Boccassi a7f2019055 Merge pull request #32010 from bluca/reexec_rate_limit
core: serialize reload rate limit and apply ReloadLimit to reexec too
2024-03-29 17:16:36 +00:00
Luca Boccassi 8312b17a29 core: apply ReloadLimit to reexec too
Same reason as the reload, reexec is disruptive and it requires the
same privileges, so if somebody wants to limit reloads, they'll also
want to limit reexecs, so use the same setting.
2024-03-29 12:03:32 +00:00
Yu Watanabe fee6510667 Merge pull request #31998 from yuwata/udev-event-mode
udev: make udevadm test and test-builtin not destructive
2024-03-29 11:31:58 +09:00
Yu Watanabe 089bef6631 udev: make udevadm test and test-builtin not destructive
Previously, 'udevadm test' performs not only processing udev rules,
but made several destructive change on the system; updating udev
database, device node permission, devlinks, network interface
properties, and so on.

Similary, 'udevadm test-builtin' may perform something destructive,
especially by 'keyboard', 'kmod', and 'net_setup_link' builtins.

Let's make these commands and test executables not change device
configurations.
2024-03-29 09:33:07 +09:00
Yu Watanabe e4c7dc9418 test: disable IPv6AcceptRA= for test network interfaces with static address
This hopefully improves test performance.
2024-03-28 12:37:45 +00:00
Adrian Vovk 1eba24dac4 homed: Release(): fix assertion failure
This fixes a race condition crash in homed that would happen in the
following sequence of events:

1. Client 1 takes a ref on the home area
2. Client 1 calls some method via dbus
3. Client 2 calls Release()

In homed, the Release() would check if a ref is still held (in this
case: yes it is) and returns an error. Except that is done through a
code-path that asserts that no operations are ongoing. In this case,
it's valid to have an ongoing operation, and so the assertion fails
causing homed to crash.
2024-03-28 13:35:37 +09:00
Luca Boccassi ed35851693 run: fix generated unit name clash after soft-reboot
When sd-run connects to D-Bus rather than the private socket, it will
generate the transient unit name using the bus ID assigned by the D-Bus
broker/daemon. The issue is that this ID is only unique per D-Bus run,
if the broker/daemon restarts it starts again from 1, and it's a simple
incremental counter for each client.
So if a transient unit run-u6.service starts and fails, and it is not
collected (default on failure), and the system soft-reboots, any new
transient unit might conflict as the counter will restart:

Failed to start transient service unit: Unit run-u6.service was already loaded or has a fragment file.

Get the soft-reboot counter, and if it's greater than zero, append it
to the autogenerated unit name to avoid clashes.
2024-03-28 11:19:46 +09:00
Frantisek Sumsal c75ee69e59 test: cleanup the test script a bit 2024-03-27 20:15:02 +01:00
Frantisek Sumsal 0348b500ef test: check for /dev/loop-control when checking lodev availability
losetup in util-linux 2.40 started reporting lost loop devices [0] and
it has an unfortunate side-effect where it reports lost devices even in
containers, which then makes the loop device check "falsely" pass [1].

Let's just check for /dev/loop-control explicitly to "work around" this.

[0] https://github.com/util-linux/util-linux/commit/a6ca0456cc6d704a786f6b66d8bb2d89ff18eba7
[1] https://github.com/util-linux/util-linux/issues/2824
2024-03-27 19:35:30 +01:00
Luca Boccassi 66f35161f6 core: add counter for soft-reboot iterations
Allow to query via D-Bus how many times the current booted system has
been soft rebooted
2024-03-27 01:27:35 +00:00
Jakub Sitnicki d1813ba436 test: integration test for PassFileDescriptorsToExec= option
Check if socket file descriptors are passed to ExecXYZ= commands from the
socket unit depending on whether PassFileDescriptorsToExec= option is set.
2024-03-27 01:41:26 +08:00
Luca Boccassi 14a5217679 resolved: support reloading configuration at runtime
Drop connections and caches and reload config from files, to allow
for low-interruptions updates, and hook up to the usual SIGHUP and
ExecReload=. Mark servers and services configured directly via D-Bus
so that they can be kept around, and only the configuration file
settings are dropped and reloaded.

Fixes https://github.com/systemd/systemd/issues/17503
Fixes https://github.com/systemd/systemd/issues/20604
2024-03-26 13:36:42 +00:00
Luca Boccassi 9065908483 test: use /run/ instead of /etc/ in TEST-75-RESOLVE 2024-03-26 12:52:42 +00:00
Zbigniew Jędrzejewski-Szmek c38e4e2fda Merge pull request #29721 from poettering/systemd-project
New capsule@.service feature
2024-03-26 13:19:33 +01:00
Luca Boccassi b1d18b96c4 Merge pull request #31801 from flatcar-hub/krnowak/sysext-config
systemd-sysext: Add support for env vars, ephemeral layers and some fixes
2024-03-26 09:23:19 +00:00
Yu Watanabe 857f29a772 test: add test cases for journalctl --facility=/--output=help
Follow-up for d44233503f.
2024-03-26 04:18:23 +09:00
Yu Watanabe cbe884f13a test: add test cases for systemd-analyze --global
Follow-up for ac97053618.
2024-03-26 04:10:04 +09:00
Krzesimir Nowak 18c1ea41c1 test: Add cases for failures to import the hierarchy 2024-03-25 08:33:31 +01:00
Krzesimir Nowak baaa167926 test, sysext: Actually fail the whole operation if sd-merge worker failed
This also fixes a wrong merge failure check.
2024-03-25 08:33:22 +01:00
Krzesimir Nowak e2bdece284 test: Add test cases for sysext ephemeral-import mode 2024-03-25 08:30:09 +01:00
Krzesimir Nowak 153e7f7b24 test: Extend sysext tests with cases using ephemeral mode 2024-03-25 08:19:48 +01:00
Krzesimir Nowak 9245b547cc test: Extend sysext tests with cases using env var for mutable mode 2024-03-25 08:14:36 +01:00
Krzesimir Nowak 73cfa16d16 test: Fail sysext test if reusing a root directory 2024-03-25 08:14:36 +01:00
networkException f2cb9d17da bpf-socket-bind: fix unexpected behavior with either 0 allow or deny rules
This patch fixes an issue where, when not specifiying either at least one
`SocketBindAllow` or `SocketBindDeny` rule, behavior for the bind syscall
filtering would be unexpected.

For example, when trying to bind to a port with only "SocketBindDeny=any"
given, the syscall would succeed:

> systemd-run -t -p "SocketBindDeny=any" nc -l 8080

Expected with this set of rules (also in accordance with the documentation)
would be an Operation not permitted error.

This behavior occurs because a default initialized socket_bind_rule struct
matches what "any" represents. When creating the bpf list all elements get
default initialized, as such represeting "any". Seemingly it is necressarry
to set the size of the map to at least one, as such if no allow rule is
given default initialization and minimal map size cause one any allow rule
to be in the map, causing the behavior observed above.

This patch solves this by introducing a new "match nothing" magic stored in
the rule's address family and setting such a rule as the first one if no
rule is given, making sure that default initialized rule structs are never
used.

Resolves #30556
2024-03-24 11:08:58 +00:00
Adrian Vovk 269a3fe245 TEST-46-HOMED: Disable auth rate-limiting
Rate limiting authentication attempts in the test can cause somewhat
sporadic test failures: adding a test case might suddenly cause future
test cases to fail because of too many authentication attempts too
quickly

We're not trying to test the rate-limiting, we're trying to test the
functionality of homed. So we effectively disable rate-limiting on all
the home areas we create
2024-03-23 01:05:13 +00:00
Adrian Vovk d94c7eef12 homework: Implement offline updates
This makes it possible to update a home record (and blob directory) of a
home area that's either completely absent (i.e. on a USB stick that's
unplugged) or just inaccessible due to lack of authentication
2024-03-23 01:05:13 +00:00
Adrian Vovk 5ec87d577f homework: Accept volume key from keyring
This bypasses authentication (i.e. user_record_authenticate) if the
volume key was loaded from the keyring and no secret section is
provided.

This also changes Update() and Resize() to always try and load the
volume key from the keyring. This makes the secret section optional for
these methods while still letting them function (as long as the home
area is active)
2024-03-23 01:05:13 +00:00
Daan De Meyer 27add528d7 test: Install test journals
Let's package these just like we package other test data.
2024-03-22 15:11:39 +01:00
Yu Watanabe bf995423fd test: add test case for issue #31776 2024-03-21 04:44:39 +09:00
Zbigniew Jędrzejewski-Szmek 7aed434371 Rename uid0 to run0
Naming is always a matter of preference, and the old name would certainly work,
but I think the new one has the following advantages:
- A verb is better than a noun.
- The name more similar to "the competition", i.e. 'sudo', 'pkexec', 'runas',
  'doas', which generally include an action verb.
- The connection between 'systemd-run' and 'run0' is more obvious.

There has been no release yet with the old name, so we can rename without
caring for backwards compatibility.
2024-03-19 16:37:22 +01:00
Zbigniew Jędrzejewski-Szmek 3df28dd9b6 test/TEST-46: drop whitespace after redirection operators 2024-03-15 16:07:58 +01:00
Lennart Poettering a037f2eb9b test: add integration test for capsules 2024-03-14 11:34:04 +01:00
Mike Yuan 45bcab66a9 journal/cat: allow connecting output to specific journal namespace 2024-03-14 14:25:53 +08:00
Lennart Poettering cf1c8cdb87 resolved: expose raw RR resolver via Varlink too
Now that we have an address, hostname, and service resolve, at the last
kind of resovler we expose over D-Bus also to Varlink.
2024-03-06 19:00:53 +01:00
Luca Boccassi ba6ec879bb Merge pull request #31621 from poettering/resolved-proxy-do
resolved: proxy upstream local requests to our stub with DO bit set
2024-03-06 13:55:14 +00:00
Frantisek Sumsal 4e5a7e1923 test: use 'ahost' instead of 'hosts' where applicable
As explained in [0] the 'hosts' database uses deprecated
gethostbyname2() which uses AF_INET6 instead of AF_UNSPEC for IPv6
lookups which is broken and makes the test fail with disabled IPv6.

[0] https://github.com/systemd/systemd/pull/28136#issuecomment-1974901039
2024-03-06 01:15:30 +00:00
Lennart Poettering df81adba88 ci: disable test that is now answered by knot
dig question with DNSSEC on will now be proxied upstream, i.e. to the
test knot server. This leads to different results, but the result isn't
tha tinteresting since we don't want to test knot, but resolved. Hence
comment this test.

There seems to be something wrong with the test though, as the upstream
server refused recursion, but if so it is not suitable as an upstream
server really, as resolved can only be client to a recursive resolver.
2024-03-05 15:29:19 +01:00
Lennart Poettering befbfca70f test: add integration test for importctl
(these are explicit tests, on top of the existing machinectl tests that
are now chainload importctl)
2024-03-01 22:29:08 +01:00
Lennart Poettering 120f4a4451 test74: create ssh empty dir all at the same place
A follow up for 8fddb50fd4, which mirrors
the change also in test 74.
2024-03-01 22:24:32 +01:00
Luca Boccassi 0abe0cd402 test: enable PAM debug logs in TEST-46-HOMED 2024-03-01 10:07:27 +00:00
Frantisek Sumsal 8fddb50fd4 test: create sshd's runtime directory (Debian variant)
sshd.service on Debian uses RuntimeDirectory=sshd, without which sshd
complains:

[ 4065.834904] sshd[711]: Missing privilege separation directory: /run/sshd
[ 4065.835785] systemd[1]: mysshserver@0-127.0.0.1:4711-127.0.0.1:58232.service: Deactivated successfully.
[ 4065.836433] testsuite-46.sh[708]: kex_exchange_identification: read: Connection reset by peer
[ 4065.836433] testsuite-46.sh[708]: Connection reset by 127.0.0.1 port 4711

Resolves: #31518
2024-02-29 13:44:29 +01:00
Frantisek Sumsal 38cbb9ab8a test: avoid SIGPIPE from ssh | tail -n 1
Addresses: https://github.com/systemd/systemd/issues/31518#issuecomment-1968295678
2024-02-29 13:43:40 +01:00
Frantisek Sumsal 905c9d2c92 test: use ECDSA keys for ssh-related tests
This should make the test faster, especially on machines without
acceleration.
2024-02-29 13:43:25 +01:00
Frantisek Sumsal 6e97142b84 test: shell & cleanup cleanup 2024-02-29 13:18:07 +01:00
Luca Boccassi 47c2a6e958 Merge pull request #31515 from keszybz/small-cleanups-after-review-of-stable-batch
Small cleanups after review of stable batch
2024-02-27 20:07:18 +00:00
Zbigniew Jędrzejewski-Szmek f7364e1a51 shared/pam-util: fix awkward tense in log message 2024-02-27 18:32:51 +01:00
Frantisek Sumsal cc48d93870 test: use socat in unidirectional mode
By default socat open a separate r/w channel for each specified address,
and terminates the connection after .5s from receiving EOF on _either_
side. And since one side of that connection is an empty stdin, we reach
that EOF pretty quickly. Let's avoid this by using socat in
"reversed unidirectional" mode, where the first address is used only for
writing, and the second one is used only for reading.

Addresses:
  - https://github.com/systemd/systemd/issues/31500
  - https://github.com/systemd/systemd/issues/31493

Follow-up for 3456c89ac2.
2024-02-27 15:24:23 +00:00
Luca Boccassi e5191faf44 Merge pull request #31000 from flatcar-hub/krnowak/mutable-overlays
systemd-sysext: Implement optional mutability for extensions
2024-02-26 16:17:11 +00:00
Zbigniew Jędrzejewski-Szmek 8e3fee33af Revert "docs: use collections to structure the data"
This reverts commit 5e8ff010a1.

This broke all the URLs, we can't have that. (And actually, we probably don't
_want_ to make the change either. It's nicer to have all the pages in one
directory, so one doesn't have to figure out to which collection the page
belongs.)
2024-02-23 09:48:47 +01:00
Krzesimir Nowak bfa2dd7558 test: Extend systemd-sysext tests to cover the mutability feature 2024-02-22 19:06:22 +01:00