There's no reason to refuse copying out capsule@abc.service even if
capsule@.service already exists on the host, so let's optionally not
search for templates if we can't find an instance when looking up
units and use it in portabled.
unit_file_exists() currently does not follow symlinks, as it is
mainly used to test whether the unit (of any install state)
has been seen under search dirs. However, in ssh-generator
we should search for and honor whatever the distro ships,
which might be an alias or linked externally.
The immediate impulse for this change is the fedora scriptlet which called:
/usr/lib/systemd/systemd-update-helper install-system-units cryptsetup-pre.target cryptsetup.target getty@.service ... system-systemd\x2dcryptsetup.slice system-systemd\x2dveritysetup.slice ...
which called
systemctl preset cryptsetup-pre.target cryptsetup.target getty@.service ... system-systemd\x2dcryptsetup.slice system-systemd\x2dveritysetup.slice ...
which threw an error that system-systemdx2dcryptsetup.slice does not exist
and did nothing at all. (The backslash is consumed by the shell.)
The obvious fix here is to figure out more levels of escaping… But we should
do something more robust in such cases.
If we fail in processing of a single unit, let preset all continue processing
units, report the failure through 'changes'. At the end, return failure. In
general, for operations which operate on a list of units specified by the user,
fail the whole operation if any of the individual operations failed. The only
operation where we don't do this is 'preset-all'.
$ SYSTEMD_LOG_LEVEL=debug build/systemctl --root=/ preset asdf1.servie asdf2.path; echo $?
Cannot find unit asdf1.servie.service.
Cannot find unit asdf2.path.
Failed to preset unit: Unit asdf1.servie.service does not exist
Failed to preset unit: Unit asdf2.path does not exist
1
While at it, fix double logging in the manager: dump_unit_changes() already
logs about errors, so the manager should only log on success.
Let's introduce these for the following two reasons:
- Using them makes sure the parameter names match between declaration
and definition (if both use the corresponding macros).
- They make sure developers can't forget the _const_ and _pure_
attributes for the declarations.
This commit also includes some include sorting fixes
Let's not leak details from src/shared and src/libsystemd into
src/basic, even though you can't actually do anything useful with
just forward declarations from src/shared.
The sd-forward.h header is put in src/libsystemd/sd-common as we
don't have a directory for shared internal headers for libsystemd
yet.
Let's also rename forward.h to basic-forward.h to keep things
self-explanatory.
The ignore directive specifies to not do anything with the given
unit and leave existing configuration intact. This allows distributions
to gradually adopt preset files by shipping a ignore * preset file.
In various tools and services we have a per-system and per-user concept.
So far we sometimes used a boolean indicating whether we are in system
mode, or a reversed boolean indicating whether we are in user mode, or
the LookupScope enum used by the lookup path logic.
Let's address that, in introduce a common enum for this, we can use all
across the board.
This is mostly just search/replace, no actual code changes.
The function was written to only return an error from internal allocation
failures, because when using it to create a bus message, we want to distinguish
a failed operation from an allocation error when sending the reply. But it
turns out that the only caller that makes this distinction checks that the
passed-in errno value ('type') is not negative beforehand. So we can make the
function pass 'type' value through, which makes most of the callers nicer.
No functional change.
Typically the _MAX and _INVALID special enum values use the full type as
prefix, even if the actual values of the enum might not. Let's follow
this rule here too.
We can just make this an enum, as long as we ensure it has enough range,
which we can do by adding -ERRNO_MAX as one possible value (at least on
GNU C). We already do that at multiple other places, so let's do this
here too.
'systemctl unmask foo' will try to remove the symlink to /dev/null under /etc/.
But the unit may also be masked by a symlink under /run/generator, in particular
the one created by systemd-debug-generator based on systemd.mask=foo on the
kernel commandline. The unmask call cannot anything about this: even if it removed
the symlink from /run/generator, it'll be recreated on the next daemon-reload.
Thus, we can only warn about it.
Initially, I wanted to check if 'systemctl.mask' is defined on the kernel
command-line, but that's not effective, because such mask symlinks can be
created by other generators based on other conditions. Checking for runtime
mask is "dumber", but is more robust because it doesn't assume who created the
mask and why.
The handling of InstallInfo is the copied from install_info_symlink_wants().
It's pretty ugly, this whole code should be rewritten from scratch.
The message is printed, but the whole operation is still "successful". This
keep backwards compatibility: people might call unmask to remove filesystem
masks even if there's still a cmdline param in place. We allow 'systemctl
mask' to create such a mask, so 'unmask' should be able to remove it.
Fixes#22689.
We had an anonymous enum with values called UNIT_FILE_…, which could easily be
confused with UNIT_FILE_… from UnitFileFlags enum. This commit renames the enum
values and also the variables which refer to them.
The two states are distinguished, but are treated everywhere identically,
so there is no difference in behaviour except for slighlty different log
output.
If an invalid arg appears in [Install] Alias=, WantedBy=, RequiredBy=,
we'd warn in the logs, but not propagate this information to the caller,
and in particular not over dbus. But if we call "systemctl enable" on a
unit, and the config if invalid, this information is quite important.
This fixes repart's, systemctl's, sysusers' and tmpfiles' specifier
expansion to honour the root dir specified with --root=. This is
relevant for specifiers such as %m, %o, … which are directly sourced
from files on disk.
This doesn't try to be overly smart: specifiers referring to runtime
concepts (i.e. boot ID, architecture, hostname) rather than files on the
medium are left as is. There's certainly a point to be made that they
should fail in case --root= is specified, but I am not entirely convinced
about that, and it's certainly something we can look into later if
there's reason to.
I wondered for a while how to hook this up best, but given that quite a
large number of specifiers resolve to data from files on disks, and most
of our tools needs this, I ultimately decided to make the root dir a
first class parameter to specifier_printf().
Replaces: #16187Fixes: #16183
When we have a unit which cannot be enabled:
# foo@.service:
...
[Install]
WantedBy=foo.target # there is no instance, so we don't know what to enable
we should throw an error when invoked directly with 'enable', but
not when doing 'preset' or 'preset-all'.
Fixes#19856.
Currently, if [Install] section contains WantedBy=target that doesn't exist,
systemd creates the symlinks anyway. That is just user-unfriendly.
Let's be nice and warn about installing non-existent targets.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1835351.
Replaces: #15834
We almost never use the named enum type, in almost all cases we use
"int" instead, since we overload it with negative errnos. To simplify
things, let's use "int" really everywhere.
Moreover, let's rename the fields for this enum to "type_or_errno", to
make the overloading clear. And let's ad some assertions that things are
in the right range.
As suggested in https://github.com/systemd/systemd/pull/11484#issuecomment-775288617.
This does not touch anything exposed in src/systemd. Changing the defines there
would be a compatibility break.
Note that tests are broken after this commit. They will be fixed in the next one.
The new methods work as the unflavoured ones, but takes flags as a
single uint64_t DBUS parameters instead of different booleans, so
that it can be extended without breaking backward compatibility.
Add new flag to allow adding/removing symlinks in
[/etc|/run]/systemd/system.attached so that portable services
configuration files can be self-contained in those directories, without
affecting the system services directories.
Use the new methods and flags from portablectl --enable.
Useful in case /etc is read-only, with only the portable services
directories being mounted read-write.
When doing list-unit-files with --root, we would re-read the preset
list for every unit. This uses a cache to only do it once. The time
for list-unit-files goes down by about ~30%.
unit_file_query_preset() is also called from src/core/. This patch does not
touch that path, since the saving there are smaller, since preset status is
only read on demand over dbus, and caching would be more complicated.
This mostly reuses existing checkers used by pid1, so handling of aliases
should be consistent. Hopefully, with the test it'll be clearer what it
happening.
Support for .wants/.requires "aliases" is restored. Those are still used in the
wild quite a bit, so we need to support them.
See https://github.com/systemd/systemd/pull/13119 for a discussion of aliases
with an instance that point to a different template: this is allowed.
Zbigniew Jędrzejewski-Szmek
Daan De Meyer
Mike Yuan
Zbigniew Jędrzejewski-Szmek
Jelle van der Waa
Lennart Poettering
David Tardon
Cristian Rodríguez
Jan Synacek
Benjamin Robin
Yu Watanabe
Luca Boccassi
fangxiuning