If log_do_header() was called with overly long parameters, it'd generate
improper output. Essentially, it'd be truncated at random point, in particular
missing a newline at the end, so it'd run with the next field, usually MESSAGE=.
log_do_header is called with parameters from compiled code (file name, lien
nubmer, etc), so in practice this was unlikely to ever be a problem, but it is
possible. In particular, if systemd was compiled from sources in some deeply
nested directory (which happens for example in mock and other build roots), the
filename could be very long.
As a safety measure, let's truncate all parameters to 256 bytes. So we have
5 fields which are 256 bytes (plus the field name prefix), and a few other
fields with fixed width. This must always fit in the 2048 byte buffer.
I don't think there's much gain in calculating the required length precisely,
since it's a lot of fields and a few bytes allocated on the stack don't matter.
This patch adds safe_atoux16 for parsing an unsigned hexadecimal 16bit int, and
uses that for parsing USB device and vendor IDs.
This fixes a compile error with gcc-8 because while we know that USB IDs are 2 bytes,
the compiler does not know that.
../src/udev/udev-builtin-hwdb.c:80:38: error: '%04X' directive output may be
truncated writing between 4 and 8 bytes into a region of size between 2 and 6
[-Werror=format-truncation=]
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Patrick Uiterwijk <puiterwijk@redhat.com>
This improves the BPF/cgroup detection logic, and looks whether
BPF_ALLOW_MULTI is supported. This flag allows execution of multiple
BPF filters in a recursive fashion for a whole cgroup tree. It enables
us to properly report IP accounting for slice units, as well as
delegation of BPF support to units without breaking our own IP
accounting.
When synthetisation is turned off, there's just too many ways those tests can
go wrong. We are not interested in verifying that the db on disk is correct,
let's just skip all checks.
In the first version of this patch, I recorded if we detected a mismatch during
configuration and only skipped tests in that case, but actually it is possible
to change the host configuration between our configuration phase and running
of the tests. It's just more robust to skip always. (This is particularly true
if tests are installed.)
This introduces a new setting TemporaryFileSystem=. This is useful
to hide files not relevant to the processes invoked by unit, while
necessary files or directories can be still accessed by combining
with Bind{,ReadOnly}Paths=.
This makes it easier to see what is going on. Crashes may happen in a
nested test_{uid,gid}_to_name_one() function, and the default backtrace
doesn't show the actual string being tested.
The Linux kernel exposes the birth time now for files through statx()
hence make use of it where available. We keep the xattr logic in place
for this however, since only a subset of file systems on Linux currently
expose the birth time. NFS and tmpfs for example do not support it. OTOH
there are other file systems that do support the birth time but might
not support xattrs (smb…), hence make the best of the two, in particular
in order to deal with journal files copied between file system types and
to maintain compatibility with older file systems that are updated to
newer version of the file system.
config_parse_join_controllers would free the destination argument on failure,
which is contrary to our normal style, where failed parsing has no effect.
Moving it to shared also allows a test to be added.
We already have the terminal open, hence pass the fd we got to
ask_password_tty(), so that it doesn't have to reopen it a second time.
This is mostly an optimization, but it has the nice benefit of making us
independent from RLIMIT_NOFILE issues and so on, as we don't need to
allocate another fd needlessly.
This new helper not only removes a file from a directory but also
ensures its space on disk is deallocated, by either punching a hole over
the full file or truncating the file afterwards if the file's link
counter is 0. This is useful in "vacuuming" algorithms to ensure that
client's can't keep the disk space the vacuuming is supposed to recover
pinned simply by keeping an fd open to it.
This is similar to string_hash_ops but operates one file system paths
specifically. It will ensure that "/foo//bar" and "///foo/bar" are
considered to be the same path for hashmap purposes.
This makes use of the existing path_compare() API, and adds a matching
hashing function for it.
Note that relative and absolute paths will hash to different values,
however whether the path is suffixed with a slash or not is not
detected. This matches the existing path_compare() behaviour, and
follows the logic that on Linux there can't be two different objects at
path /foo/bar and /foo/bar/ either.
This adds some paranoia code that moves some of the fds we allocate for
longer periods of times to fds > 2 if they are allocated below this
boundary. This is a paranoid safety thing, in order to avoid that
external code might end up erroneously use our fds under the assumption
they were valid stdin/stdout/stderr. Think: some app closes
stdin/stdout/stderr and then invokes 'fprintf(stderr, …' which causes
writes on our fds.
This both adds the helper to do the moving as well as ports over a
number of users to this new logic. Since we don't want to litter all our
code with invocations of this I tried to strictly focus on fds we keep
open for long periods of times only and only in code that is frequently
loaded into foreign programs (under the assumptions that in our own
codebase we are smart enough to always keep stdin/stdout/stderr
allocated to avoid this pitfall). Specifically this means all code used
by NSS and our sd-xyz API:
1. our logging APIs
2. sd-event
3. sd-bus
4. sd-resolve
5. sd-netlink
This changed was inspired by this:
https://github.com/systemd/systemd/issues/8075#issuecomment-363689755
This shows that apparently IRL there are programs that do close
stdin/stdout/stderr, and we should accomodate for that.
Note that this won't fix any bugs, this just makes sure that buggy
programs are less likely to interfere with out own code.
This is preparation for emulating the "usage_usec" keyed attribute of
the "cpu.stat" property of the root cgroup from data in /proc. Similar,
for emulating the "memory.current" attribute.
It's not good if the paths are in different order. With --user, we expect
more paths, but it must be a strict superset, and the order for the ones
that appear in both sets must be the same.
$ diff -u <(build/systemd-analyze --global unit-paths) <(build/systemd-analyze --user unit-paths)|colordiff
--- /proc/self/fd/14 2018-02-08 14:11:45.425353107 +0100
+++ /proc/self/fd/15 2018-02-08 14:11:45.426353116 +0100
@@ -1,6 +1,17 @@
+/home/zbyszek/.config/systemd/system.control
+/run/user/1000/systemd/system.control
+/run/user/1000/systemd/transient
+/run/user/1000/systemd/generator.early
+/home/zbyszek/.config/systemd/user
/etc/systemd/user
+/run/user/1000/systemd/user
/run/systemd/user
+/run/user/1000/systemd/generator
+/home/zbyszek/.local/share/systemd/user
+/home/zbyszek/.local/share/flatpak/exports/share/systemd/user
+/var/lib/flatpak/exports/share/systemd/user
/usr/local/share/systemd/user
/usr/share/systemd/user
/usr/local/lib/systemd/user
/usr/lib/systemd/user
+/run/user/1000/systemd/generator.late
A test is added so that we don't regress on this.
The function `strv_join_quoted()` is now not used, and has a bug
in the buffer size calculation when the strings needs to escaped,
as reported in #8056.
So, let's remove the function.
Closes#8056.
Red is used for highligting, the same as grep does. Except when the line is
highlighted red already, because it has high priority, in which case plain ansi
highlight is used for the matched substring.
Coloring is implemented for short and cat outputs, and not for other types.
I guess we could also add it for verbose output in the future.
Case sensitive or case insensitive matching can be requested using
--case-sensitive[=yes|no].
Unless specified, matching is case sensitive if the pattern contains any
uppercase letters, and case insensitive otherwise. This matches what
forward-search does in emacs, and recently also --ignore-case in less. This
works surprisingly well, because usually when one is wants to do case-sensitive
matching, the pattern is usually camel-cased. In the less frequent case when
case-sensitive matching is required with an all-lowercase pattern,
--case-sensitive can be used to override the automatic logic.
Previously, we'd maintain two hashmaps keyed by PIDs, pointing to Unit
interested in SIGCHLD events for them. This scheme allowed a specific
PID to be watched by exactly 0, 1 or 2 units.
With this rework this is replaced by a single hashmap which is primarily
keyed by the PID and points to a Unit interested in it. However, it
optionally also keyed by the negated PID, in which case it points to a
NULL terminated array of additional Unit objects also interested. This
scheme means arbitrary numbers of Units may now watch the same PID.
Runtime and memory behaviour should not be impact by this change, as for
the common case (i.e. each PID only watched by a single unit) behaviour
stays the same, but for the uncommon case (a PID watched by more than
one unit) we only pay with a single additional memory allocation for the
array.
Why this all? Primarily, because allowing exactly two units to watch a
specific PID is not sufficient for some niche cases, as processes can
belong to more than one unit these days:
1. sd_notify() with MAINPID= can be used to attach a process from a
different cgroup to multiple units.
2. Similar, the PIDFile= setting in unit files can be used for similar
setups,
3. By creating a scope unit a main process of a service may join a
different unit, too.
4. On cgroupsv1 we frequently end up watching all processes remaining in
a scope, and if a process opens lots of scopes one after the other it
might thus end up being watch by many of them.
This patch hence removes the 2-unit-per-PID limit. It also makes a
couple of other changes, some of them quite relevant:
- manager_get_unit_by_pid() (and the bus call wrapping it) when there's
ambiguity will prefer returning the Unit the process belongs to based on
cgroup membership, and only check the watch-pids hashmap if that
fails. This change in logic is probably more in line with what people
expect and makes things more stable as each process can belong to
exactly one cgroup only.
- Every SIGCHLD event is now dispatched to all units interested in its
PID. Previously, there was some magic conditionalization: the SIGCHLD
would only be dispatched to the unit if it was only interested in a
single PID only, or the PID belonged to the control or main PID or we
didn't dispatch a signle SIGCHLD to the unit in the current event loop
iteration yet. These rules were quite arbitrary and also redundant as
the the per-unit handlers would filter the PIDs anyway a second time.
With this change we'll hence relax the rules: all we do now is
dispatch every SIGCHLD event exactly once to each unit interested in
it, and it's up to the unit to then use or ignore this. We use a
generation counter in the unit to ensure that we only invoke the unit
handler once for each event, protecting us from confusion if a unit is
both associated with a specific PID through cgroup membership and
through the "watch_pids" logic. It also protects us from being
confused if the "watch_pids" hashmap is altered while we are
dispatching to it (which is a very likely case).
- sd_notify() message dispatching has been reworked to be very similar
to SIGCHLD handling now. A generation counter is used for dispatching
as well.
This also adds a new test that validates that "watch_pid" registration
and unregstration works correctly.
The new flag returns the O_PATH fd of the final component, which may be
converted into a proper fd by open()ing it again through the
/proc/self/fd/xyz path.
Together with O_SAFE this provides us with a somewhat safe way to open()
files in directories potentially owned by unprivileged code, where we
want to refuse operation if any symlink tricks are played pointing to
privileged files.
When the flag is specified we won't transition to a privilege-owned
file or directory from an unprivileged-owned one. This is useful when
privileged code wants to load data from a file unprivileged users have
write access to, and validates the ownership, but want's to make sure
that no symlink games are played to read a root-owned system file
belonging to a different context.
log.h really should only include the bare minimum of other headers, as
it is really pulled into pretty much everything else and already in
itself one of the most basic pieces of code we have.
Let's hence drop inclusion of:
1. sd-id128.h because it's entirely unneeded in current log.h
2. errno.h, dito.
3. sys/signalfd.h which we can replace by a simple struct forward
declaration
4. process-util.h which was needed for getpid_cached() which we now hide
in a funciton log_emergency_level() instead, which nicely abstracts
the details away.
5. sys/socket.h which was needed for struct iovec, but a simple struct
forward declaration suffices for that too.
Ultimately this actually makes our source tree larger (since users of
the functionality above must now include it themselves, log.h won't do
that for them), but I think it helps to untangle our web of includes a
tiny bit.
(Background: I'd like to isolate the generic bits of src/basic/ enough
so that we can do a git submodule import into casync for it)
