The Azure MANA folks would like the PCI domain to be suppressed from
naming network interfaces. Let's introduce a somewhat generic way to do
this, without hardcoding anything to Azure.
Specifically: we'll ship a new hwdb entry that sets a new
ID_NET_NAME_INCLUDE_DOMAIN=0 property on relevant MANA devices. Then we
make net_id look for that property, and if it is set we simply suppress
the PCI domain.
(Untested as of now, needs feedback from Azure MANA folks that this
actually works and does what is requested here).
Previously, even if e.g. .rules files are unchanged, all .rules files
are reloaded when other kind of config files like .link files or
.hwdb.bin are changed, vice versa.
Then, save configurations by their source: udev.conf, command line
arguments, kernel command line options, and udev control.
Preparation to support reloading udev.conf in a later commit.
This commit add the `-i` option to `udevadm trigger` that force it to
match parent devices even if they're excluded from filters.
The rationale is that some embedded devices have a huge number of
platform devices ( ~ 4k for MX8 ) they are there because they're defined
in the device tree but there isn't any action or udev rules associated
with them.
So at boot a significant time is spend triggering and processing rules
for devices that don't produce any effect and we would like to filter
them by calling:
```
udevadm trigger --type=device --action=add -s block -s tty
```
instead of the normal
```
udevadm trigger --type=device --action=add
```
so we can use filter to filter out only subsystems for we we know that
we have rules in place that do something useful.
On the other side action / rules are not triggered until the parent is
triggered ( which is part of another subsystem), so the additional option
will allows udev to complete the coldplug with only the devices we care.
Example on iMX8:
.Without the new option
```
root@dev:~# udevadm trigger --dry-run -s block --action=add -v
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0boot0
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0boot1
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p4
```
.With the new option
```
root@dev:~# udevadm trigger --dry-run -i -s block --action=add -v
/sys/devices/platform
/sys/devices/platform/bus@5b000000
/sys/devices/platform/bus@5b000000/5b010000.mmc
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0boot0
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0boot1
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p1
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p2
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p3
/sys/devices/platform/bus@5b000000/5b010000.mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p4
```
Boot time reduction with this is place is ~ 1 second.
We used both, in fact "Devicetree" was more common. But we have a general rule
that we capitalize all words in names and also we have a DeviceTree=
configuration setting, which we cannot change. If we use two different
spelllings, this will make it harder for people to use the correct one in
config files. So use the "DeviceTree" spelling everywhere.
Some kernel SAS drivers (e.g. smartpqi) expose ports with num_phys = 0. udev
shouldn't treat these ports as wide ports. SAS wide ports always have
num_phys > 1. See comments for sas_port_add_phy() in the kernel sources.
Sample data from a smartpqi system to illustrate the issue below.
Here the phy device is attached to port 0:0, which has no end devices attached
and the SAS end device (where sda is attached) is associated with SAS
port 0:1, which has no associated phy device. Thus num_phys for port-0:1 is 0.
This is arguably wrong, but it's how smartpqi has always set up its devices in
sysfs.
/sys/class/sas_phy/phy-0:0 -> ../../devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/phy-0:0/sas_phy/phy-0:0
/sys/devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/port-0:0/phy-0:0 -> ../phy-0:0
/sys/devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/phy-0:0/port -> ../port-0:0
/sys/class/sas_device/end_device-0:1 -> ../../devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/port-0:1/end_device-0:1/sas_device/end_device-0:1
/sys/class/block/sda -> ../../devices/pci0000:46/0000:46:02.0/0000:47:00.0/host0/scsi_host/host0/port-0:1/end_device-0:1/target0:0:0/0:0:0:0/block/sda
Signed-off-by: Martin Wilck <mwilck@suse.com>
We are going to output a series of JSON objects, hence let's
automatically enable JSON-SEQ output mode, as we usually do.
"jq --seq" supports this natively, hence this should not really restrict
us.
Follow-up for: 67ea8a4c0e
We often used a pattern like if (!FLAGS_SET(flags, SD_JSON_FORMAT_OFF)),
which is rather verbose and also contains a double negative, which we try
to avoid. Add a little helper to avoid an explicit bit check.
This change clarifies an aditional thing: in some cases we treated
SD_JSON_FORMAT_OFF as a flag (flags & SD_JSON_FORMAT_OFF), while in other cases
we treated it as an independent enum value (flags == SD_JSON_FORMAT_OFF).
In the first form, flags like SD_JSON_FORMAT_SSE do _not_ turn the json
output on, while in the second form they do. Let's use the first form
everywhere.
No functional change intended.
Initially I wasn't sure if this helper should be made public or just internal,
but it seems such a common pattern that if we expose the flags, we might just
as well expose it too, to make life easier for any consumers.
As another device may be created with the same device node while udevd
is processing the remove event of the previous owner of the device node.
This also adds comment why we skip watching device node on remove.
Fixes a bug introduced by f6bda694f9 (v256).
With the offending commit, on remove event, database file for a device is once
removed in event_execute_rules_on_remove(), but later re-created here.
This fixes the issue, and makes the database file not re-created on remove event.
Replaces 09373c1a50.
Let's remove stack directories and their lock files by workers if
possible.
Now, lock files must be created before creating stack directories, hence
lock files are moved to /run/udev/links.lock/ , e.g.,
Before:
/run/udev/links/disk\x2fby-diskseq\x2f1/.lock
After:
/run/udev/links.lock/disk\x2fby-diskseq\x2f1
Fixes ##34637.
The disk/by-diskseq symlink should not be shared with multiple block
devices. Hence, it is not necessary to create stack directory for the
symlink that manages which device owns the symlink.
This is not just a optimization.
If a service unit tries to mount a disk image but the service fails, then
the diskseq of the loop device for the image may be continuously increased
during restart, and inodes in /run may increase rapidly, as the stack
directories are cleaned up only when udev queue is empty.
Fixes#34637.
This introduces 'i' prefix for match string. When specified, string or
pattern will match case-insensitively.
Closes#34359.
Co-authored-by: Ryan Wilson <ryantimwilson@meta.com>
This tries to get rid of most manual sigprocmask() changes, in favour
of:
1. The SD_EVENT_SIGNAL_PROCMASK flag to sd_event_add_signal()
2. The sd_event_set_signal_exit() call for handling SIGTERM/SIGINT
3. Move masking of SIGWINCH into ptyfwd, out of nspawn/vmspawn/run
And while we are at it get rid of a bunch of event source fields whose
lifetime is bound to the sd_event object they belong to anyway, and make
use of the "floating" event source feature of sd-event instead.
Lennart Poettering
Mike Yuan
Antonio Alvarez Feijoo
Yu Watanabe
Federico Giovanardi
Daan De Meyer
Zbigniew Jędrzejewski-Szmek
Martin Wilck
Integral
Luca Boccassi
