Commit a65ebc3ff9 ("claude-review: improve review quality for large
PRs") dropped the `Claude: **<severity>**: ` prefix from posted inline
comments on the theory that Claude was also adding the severity into
`body`, producing duplicates. But nothing in the prompt or schema
actually asks the subagent to include severity in `body` — severity
is a separate structured field. The result is that inline comments
no longer show must-fix/suggestion/nit classification.
Restore the prefix in the posting step, and add an explicit instruction
to the subagent prompt telling it not to repeat severity inside `body`
so the two don't collide.
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
There are only a few target dirs we place resources in when generating
on-the-fly initrd cpios. These dirs have very specific attributes.
Instead of repeating this everywhere, let's encapsulate them in a new
explicit structure, that we can reuse at various places.
This is preparation for placing extra resources of Type #1 entry also in
them without having to encode access modes at multiple places
redundantly.
This changes the initrd combination logic to also include any initrd
already configured via the "LINUX_INITRD_MEDIA_GUID" device in the
initrd we pass to the linux kernel.
Or in other words: with this systemd-stub starts operating purely
incremental: it will extend any previously installed initrd with its own
stuff, so that both the previous initrd(s) and systemd-stub's are in
effect.
So far, if an initrd is already registered we'd silently not register
one again. Let's make this more reliable and systematic, and register
ours, overriding what is previously set.
(Note, in a later commit we'll incorporate any previously set initrd,
which hence makes this all incremental instead of destructive as it
might appear now)
Convert fdisk-util to the dlopen pattern used by other optional shared
libraries in libshared. Declare the libfdisk API entry points with
DLSYM_PROTOTYPE, resolve them in a dlopen_fdisk() helper, and call the
sym_* wrappers from the homework, sysupdate and repart binaries that
use them.
With this in place fdisk-util can live in libshared itself, linked only
against libfdisk's headers (via libfdisk_cflags). The libshared_fdisk
convenience library and the libfdisk link dependency on systemd-homework,
systemd-sysupdate, systemd-repart and systemd-repart.standalone go away.
Also add a dlopen_fdisk() check to test-dlopen-so.
Split the single directory fd that chaseat() used to take into two separate
fds: a root_fd that sets the chroot boundary (symlinks may not escape it,
absolute symlinks resolve relative to it), and a dir_fd that path resolution
starts from. This makes the chroot semantics of chaseat() explicit at every
call site instead of encoding them in the CHASE_AT_RESOLVE_IN_ROOT flag,
which is removed. It also decouples the starting directory from the root
boundary, so callers can descend from any inode inside the tree without
having to reopen the root separately.
XAT_FDROOT passed as root_fd means "no containment" (host root); as dir_fd
it means "start at root_fd". For a smoother transition, AT_FDCWD is also
accepted as root_fd and treated as XAT_FDROOT. When root_fd points to a
directory that is actually the host root, it is normalized to XAT_FDROOT
up front so the existing shortcut path can kick in.
Absolute paths returned by chaseat() are now relative to root_fd, and
relative paths are relative to dir_fd. The result is absolute only when
there is no chroot boundary (root_fd is XAT_FDROOT), or when an absolute
symlink made resolution jump out of the dir_fd subtree; otherwise callers
get a relative path they can feed straight back into an openat()-style
call against dir_fd. Specifically, when dir_fd == root_fd and we're not
operating on the host's root directory, we return a relative path even if
we received an absolute path or resolved an absolute symlink to allow
passing the path directly to openat() style functions. We do this to not
have to go modify every caller of chaseat() to make sure they deal properly
with any absolute paths they might receive. Only when root_fd != dir_fd do
we have to return an absolute path to indicate that the path is relative to
root_fd and not dir_fd.
The shortcut that skips the per-component walk is reworked around a new
chase_xopenat() helper that funnels CHASE_NOFOLLOW, CHASE_MUST_BE_* and
CHASE_TRIGGER_AUTOFS through xopenat_full()'s O_NOFOLLOW, O_DIRECTORY,
XO_REGULAR, XO_SOCKET and XO_TRIGGER_AUTOMOUNT flags. As a result these
flags no longer force us off the shortcut and can be dropped from
CHASE_NO_SHORTCUT_MASK, and the old openat_opath_with_automount() helper
goes away. A CHASE_MUST_BE_ANY alias is introduced for shortcut callers
(stat/access paths) that don't go through xopenat_full() and still need
to bail on those flags locally.
All *_and_* helpers built on top of chaseat() (chase_and_openat,
chase_and_opendirat, chase_and_statat, chase_and_accessat,
chase_and_fopenat_unlocked, chase_and_unlinkat, chase_and_open_parent_at)
gain the same root_fd parameter, and every call site in the tree is
ported to the new signature.
chase_and_open() is also fixed to correctly handle CHASE_EXTRACT_FILENAME
without CHASE_PARENT.
XO_SOCKET asks for the opened inode to be verified as a socket, analogous to
the existing XO_REGULAR. A new fd_verify_socket() helper is added to
stat-util to perform the check on an opened fd.
XO_TRIGGER_AUTOMOUNT asks O_PATH opens to trigger automounts by going via
open_tree() without OPEN_TREE_CLONE, falling back to openat() if the kernel
or sandbox rejects open_tree().
`READY=1` is already correctly emitted when acquiring an update, but was
forgotten to be emitted when subsequently installing that update.
That meant that the state tracking code in `sysupdated` and hence
`updatectl` could not properly report the progress of the install
operation, and hence printed “Already up-to-date” after a successful
update installation, rather than “Done”.
Add a test to catch this in future.
Signed-off-by: Philip Withnall <pwithnall@gnome.org>
Fixes: https://github.com/systemd/systemd/issues/41502
Convert curl-util to the dlopen pattern used by other optional shared
libraries in libshared (libarchive, pcre2, idn, ...). Declare the curl
API entry points with DLSYM_PROTOTYPE, resolve them in a dlopen_curl()
helper, and call the sym_* wrappers from callers. curl_glue_new() now
loads the library on first use, so consumers going through CurlGlue
pick this up automatically; journal-upload and report-upload call
dlopen_curl() directly since they use curl without the glue layer.
With this in place curl-util can live in libshared itself, linked only
against libcurl's headers (via libcurl_cflags). The libcurlutil_static
convenience library and the libcurl link dependency on systemd-imdsd,
systemd-pull, systemd-journal-upload and systemd-report go away.
Also move the easy_setopt() helper macro next to the DLSYM declarations
so all consumers use a single sym-prefixed definition, and add a
dlopen_curl() check to test-dlopen-so.
The json-stream API previously exposed JsonStreamQueueItem and several
functions operating on it (json_stream_make_queue_item(),
json_stream_enqueue_item(), json_stream_queue_item_free(),
json_stream_queue_item_get_data()). These existed solely to support
sd-varlink's "defer-and-modify" pattern for streaming replies, where a
reply is held back so its "continues" field can be set before
transmission. This is a varlink protocol concern that should not leak
into the generic transport layer.
Similarly, the fd pushing API (json_stream_push_fd(),
json_stream_reset_pushed_fds()) and the pushed_fds state lived inside
JsonStream, even though fd-to-message association is a protocol-level
concern managed entirely by sd-varlink.
Rework the API so that:
- JsonStreamQueueItem and all its functions become static to
json-stream.c. The only output API is now json_stream_enqueue_full()
(accepting explicit fds) and the inline json_stream_enqueue() wrapper
for the common no-fds case.
- The pushed_fds state moves from JsonStream into sd_varlink, where
sd_varlink_push_fd() and sd_varlink_reset_fds() manage it directly.
- The deferred reply in sd-varlink changes from a JsonStreamQueueItem*
to a plain sd_json_variant* plus a separate previous_fds/n_previous_fds
pair, keeping the protocol-specific bookkeeping in sd-varlink where it
belongs.
- A new varlink_enqueue() helper wraps json_stream_enqueue_full() with
the varlink connection's pushed fds, transferring fd ownership to the
queue item on success.
qmp-client.c is fixed to use the new API as well.
The reworks the ESP/XBOOTLDR logic to pin the ESP/XBOOTLDR via an fd,
and return that as optional return parameter.
So far we only pinned the parent dir of the ESP/XBOOTLDR, which was
useful when verifying that ESP/XBOOTLDR is actually a mount point by
comparing mount ids. This however became obsolete with
a98a6eb95c. Hence, let's clean this up,
and pin the inode we really care about and return it.
Some flags don't reasonably apply to chase_and_unlinkat() (because we
open the parent inode of an inode to delete, which is always a dir),
hence let's catch these flags when misused.
(I ran into this, and it was very confusing to debug, hence let's make
it easier)
Newer tar started using openat2() via open_subdir() to address
CVE-2025-45582 [0]. Now, gnulib, that tar uses, provides the openat2()
syscall in two ways [1]:
1) If glibc doesn't provide openat2(), it provides its own version in
openat2.c, that tries to call openat2() syscall first, and if it
returns ENOSYS, it emulates the function in userspace.
2) If glibc provides openat2(), it uses that directly, without providing
any fallback on ENOSYS.
Quite recently our test suite started calling nspawn with
--suppress-sync=yes. This means that we call seccomp_suppress_sync(),
which eventually calls block_open_flag(), that blocks the openat2()
syscall completely and refuses it with ENOSYS as this syscall can't be
sensibly filtered (see the openat2()-relevant comments in
block_open_flag() and seccomp_restrict_sxid()). And when glibc provides
openat2(), there's no fallback, so the ENOSYS bubbles up to the user as:
TEST-25-IMPORT.sh[163]: + tar xzf /var/tmp/scratch.tar.gz
TEST-25-IMPORT.sh[163]: tar: ./adirectory/athirdfile: Cannot open: Function not implemented
TEST-25-IMPORT.sh[163]: tar: Exiting with failure status due to previous errors
Let's mitigate this by re-enabling sync for TEST-25-IMPORT, at least for
now.
[0] https://cgit.git.savannah.gnu.org/cgit/tar.git/commit/?id=75b03fdff48916bd0654677ed21379bdb0db016d
[1] https://cgit.git.savannah.gnu.org/cgit/gnulib.git/commit/?id=0b97ffdf32bdab909d02449043447237273df75e
Add "overlay", which is already mentioned further down below, to the
list of possible options.
Consistently use <literal> for possible values of systemd.volatile=,
rather than <param> or no special formatting.
Use yes/no rather than true/false as boolean since that is what's used
everywhere else and I'm already touching the lines anyway.
In nspawn.c's run_container() the child_netns_fd = receive_one_fd(...)
failure path logged 'r' instead of the negative errno returned in
child_netns_fd, so the actual error from receive_one_fd was being
overwritten by whatever 'r' happened to hold. The other receive_one_fd
call sites in the same function use the returned fd variable directly
(mntns_fd, etc.), so align this one.
In shared/nsresource.c's nsresource_add_cgroup() the cgroup_fd_idx =
sd_varlink_push_dup_fd(...) failure path logged userns_fd_idx, which
is the previous successful push's index, not the negative errno we
just got from pushing cgroup_fd. Log cgroup_fd_idx instead.
Both were flagged by static analysis (#41709) and match the immediately
preceding userns_fd-path pattern that was presumably copy-pasted.
Refs #41709.
If a journal file contains a truncated ZSTD frame (i.e. a frame with
Frame_Content_Size > 0, but with not enough data in Data_Block),
ZSTD_decompressStream() would return a non-zero, non-error value. This
would then skip the error path in the ZSTD_isError() branch and we'd hit
the following assert:
$ build-local/journalctl -o cat --file zstd-truncated.journal
Assertion 'output.pos >= prefix_len + 1' failed at src/basic/compress.c:1236, function decompress_startswith_zstd(). Aborting.
Aborted (core dumped) build-local/journalctl -o cat --file zstd-truncated.journal
Let's handle this situation gracefully and return EBADMSG instead.
Also, add another journalctl invocation to the corrupted-journals test
that goes through the sd_journal_get_data() -> decompress_startswith_zstd()
code path which, among other things, covers the issue when run on the
provided journal file.
vsnprintf() can, under some circumstances, return negative value, namely
during encoding errors when converting wchars to multi-byte characters.
This would then wreak havoc in the arithmetics we do following the
vsnprintf() call. However, since we never do any wchar shenanigans in
our code it should never happen.
Let's encode this assumption into the code as an assert(), similarly how
we already do this in other places (like strextendf_with_separator()).
Lennart Poettering
Christian Brauner
Daan De Meyer
Philip Withnall
Frantisek Sumsal
Felix Pehla
mukunda katta
Christian Brauner
Yu Watanabe