In subsequent commits, calls to if_nametoindex() will be replaced by a wrapper
that falls back to alternative name resolution over netlink. netlink support
requires libsystemd (for sd-netlink), and we don't want to add any functions
that require netlink in basic/. So stuff that calls if_nametoindex() for user
supplied interface names, and everything that depends on that, needs to be
moved.
If we have a template unit template@.service, it should be allowed to specify a
dependency on a unit without an instance, bar@.service. When the unit is created,
the instance will be propagated into the target, so template@inst.service will
depend on bar@inst.service.
This commit changes unit_dependency_name_compatible(), which makes the manager
accept links like that, and unit_file_verify_alias(), so that the installation
function will agree to create a symlink like that, and finally the tests are
adjusted to pass.
We should allow the ones that the [Unit] section of regular unit files
may accet, but no other, in particular not the internal deps we
synthesize as reverse of explicitly configured ones, such was WantedBy=.
Fixes: #14251
When in a userns environment we cannot take away per-mount point flags
set on a mount point that was passed to us. Hence we need to be careful
to always check the actual mount flags in place and manipulate only
those flags of them that we actually want to change and not reset more
as side-effect.
We mostly got this right already in
bind_remount_recursive_with_mountinfo(), but didn't in the simpler
bind_remount_one_with_mountinfo(). Catch up.
(The old code assumed that the MountEntry.flags field contained the
right flag settings, but it actually doesn't for new mounts we just
established as for those mount() establishes the initial flags for us,
and we have to read them back to figure out which ones the kernel
picked.)
Fixes: #13622
It makes sense to filter state changes for some load states that
shouldn't happen, but the common cases should be accepted, because they
might happen during runtime when "systemctl daemon-reload" is issued and
unit files changed state in between. Otherwise we lose events.
Fixes: #4708
So far we set up a loopback file read-only iff ProtectSystem= and
ProtectHome= both where set to values that mark these dirs read-only.
Let's extend that and also be happy if /home and the root dir are marked
read-only by some other means.
Fixes: #14442
Similar, refuse triggering deps on units that cannot trigger.
And rework how we ignore After= dependencies on device units, to work
the same way.
See: #14142
Previously, when first connecting to the bus after connecting to it we'd
issue a ListNames() bus call to the driver to figure out which bus names
are currently active. This information was then used to initialize the
initial state for services that use BusName=.
This change removes the whole code for this and replaces it with
something vastly simpler.
First of all, the ListNames() call was issues synchronosuly, which meant
if dbus was for some reason synchronously calling into PID1 for some
reason we'd deadlock. As it turns out there's now a good chance it does:
the nss-systemd userdb hookup means that any user dbus-daemon resolves
might result in a varlink call into PID 1, and dbus resolves quite a lot
of users while parsing its policy. My original goal was to fix this
deadlock.
But as it turns out we don't need the ListNames() call at all anymore,
since #12957 has been merged. That PR was supposed to fix a race where
asynchronous installation of bus matches would cause us missing the
initial owner of a bus name when a service is first started. It fixed it
(correctly) by enquiring with GetOwnerName() who currently owns the
name, right after installing the match. But this means whenever we start watching a bus name we anyway
issue a GetOwnerName() for it, and that means also when first connecting
to the bus we don't need to issue ListNames() anymore since that just
tells us the same info: which names are currently owned.
hence, let's drop ListNames() and instead make better use of the
GetOwnerName() result: if it failed the name is not owned.
Also, while we are at it, let's simplify the unit's owner_name_changed()
callback(): let's drop the "old_owner" argument. We never used that
besides logging, and it's hard to synthesize from just the return of a
GetOwnerName(), hence don't bother.
When a service unit watches a bus name (i.e. because of BusName= being
set), then we do two things: we install a match slot to watch how its
ownership changes, and we inquire about the current owner. Make sure we
always do both together or neither.
This in particular fixes a corner-case memleak when destroying bus
connections, since we never freed the GetNameOwner() bus slots when
destroying a bus when they were still ongoing.
It's a *return* parameter, not an input parameter. Yes, this is a bit
confusing for method call replies, but we try to use the same message
handler for all incoming messages, hence the parameter. We are supposed
to write any error into it we encounter, if we want, and our caller will
log it, but that's it.
In the steps given in #13850, the resulting graph looks like:
C (Anchor) -> B -> A
Since B is inactive, it will be flagged as redundant and removed from
the transaction, causing A to get garbage collected. The proposed fix is
to not mark nodes as redundant if doing so causes a relevant node to be
garbage collected.
Fixes#13850
This has been requested many times before. Let's add it finally.
GPT auto-discovery for /var is a bit more complex than for other
partition types: the other partitions can to some degree be shared
between multiple OS installations on the same disk (think: swap, /home,
/srv). However, /var is inherently something bound to an installation,
i.e. specific to its identity, or actually *is* its identity, and hence
something that cannot be shared.
To deal with this this new code is particularly careful when it comes to
/var: it will not mount things blindly, but insist that the UUID of the
partition matches a hashed version of the machine-id of the
installation, so that each installation has a very specific /var
associated with it, and would never use any other. (We actually use
HMAC-SHA256 on the GPT partition type for /var, keyed by the machine-id,
since machine-id is something we want to keep somewhat private).
Setting the right UUID for installations takes extra care. To make
things a bit simpler to set up, we avoid this safety check for nspawn
and RootImage= in unit files, under the assumption that such container
and service images unlikely will have multiple installations on them.
The check is hence only required when booting full machines, i.e. in
in systemd-gpt-auto-generator.
To help with putting together images for full machines, PR #14368
introduces a repartition tool that can automatically fill in correctly
calculated UUIDs on first boot if images have the var partition UUID
initialized to all zeroes. With that in place systems can be put
together in a way that on first boot the machine ID is determined and
the partition table automatically adjusted to have the /var partition
with the right UUID.
This reverts commit 07125d24ee.
In contrast to what is claimed in #13396 dbus-broker apparently does
care for the service file to be around, and otherwise will claim
"Service Not Activatable" in the time between systemd starting up the
broker and connecting to it, which the stub service file is supposed to
make go away.
Reverting this makes the integration test suite pass again on host with
dbus-broker (i.e. current Fedora desktop).
Tested with dbus-broker-21-6.fc31.x86_64.
Write a user unit's invocation ID to /run/user/<uid>/systemd/units/ similar
to how a system unit's invocation ID is written to /run/systemd/units/.
This lets the journal read and add a user unit's invocation ID to the
_SYSTEMD_INVOCATION_ID field of logs instead of the user manager's
invocation ID.
Fixes#12474
To support ProtectHome=y in a user namespace (which mounts the inaccessible
nodes), the nodes need to be accessible by the user. Create these paths and
devices in the user runtime directory so they can be used later if needed.
Let per-user service managers have user namespaces too.
For unprivileged users, user namespaces are set up much earlier
(before the mount, network, and UTS namespaces vs after) in
order to obtain capbilities in the new user namespace and enable use of
the other listed namespaces. However for privileged users (root), the
set up for the user namspace is still done at the end to avoid any
restrictions with combining namespaces inside a user namespace (see
inline comments).
Closes#10576
Lennart Poettering
Dariusz Gadomski
Zbigniew Jędrzejewski-Szmek
Franck Bui
Anita Zhang
Topi Miettinen
Kevin Kuehler
Dimitri John Ledkov
Leonid Evdokimov