This adds a way to control SO_TIMESTAMP/SO_TIMESTAMPNS socket options
for sockets PID 1 binds to.
This is useful in journald so that we get proper timestamps even for
ingress log messages that are submitted before journald is running.
We recently turned on packet info metadata from PID 1 for these sockets,
but the timestamping info was still missing. Let's correct that.
Let's not have #ifdeffery both in the consumers and the providers of the
selinux glue code. Unless the code is particularly complex, let's do the
ifdeffery only in the provider of the selinux glue code, and let's keep
the consumers simple and just invoke it.
So far half of sd_event_source_set_enabled() was doing enabling, the
other half was doing disabling. Let's split that into two separate
calls.
(This also adds a new shortcut to sd_event_source_set_enabled(): if the
caller toggles between "ON" and "ONESHOT" we'll now shortcut this, since
the event source is already enabled in that case and shall remain
enabled.)
This heavily borrows and is inspired from Michal Sekletár's #17284
refactoring.
We typically don't just reshuffle a single prioq at once, but always
two. Let's add two helper functions that do this, and reuse them
everywhere.
(Note that this drops one minor optimization:
sd_event_source_set_time_accuracy() previously only reshuffled the
"latest" prioq, since changing the accuracy has no effect on the
earliest time of an event source, just the latest time an event source
can run. This optimization is removed to simplify things, given that
it's not really worth the effort as prioq_reshuffle() on properly
ordered prioqs has practically zero cost O(1)).
(Slightly generalized, commented and split out of #17284 by Lennart)
This reverts commit 6c5496c492.
sysinit.target is shared between the initrd and the host system. Pulling in
initrd-cryptsetup.target into sysinit.target causes the following warning at
boot:
Oct 27 10:42:30 workstation-uefi systemd[1]: initrd-cryptsetup.target: Starting requested but asserts failed.
Oct 27 10:42:30 workstation-uefi systemd[1]: Assertion failed for initrd-cryptsetup.target.
If processes remain in the unit's cgroup after the final SIGKILL is
sent and the unit has exceeded stop timeout, don't release the unit's
cgroup information. Pid1 will have failed to `rmdir` the cgroup path due
to processes remaining in the cgroup and releasing would leave the cgroup
path on the file system with no tracking for pid1 to clean it up.
Instead, keep the information around until the last process exits and pid1
sends the cgroup empty notification. The service/scope can then prune
the cgroup if the unit is inactive/failed.
Ubuntu builds on the Launchpad infrastructure run inside a chroot that does
not have the sysfs cgroup dirs mounted, so this call will return ENOMEDIUM
from cg_unified_cached() during the build-time testing, for example when
building the package in a Launchpad PPA.
This effectively reverts the commit 22fc2420b2.
The function `asynchronous_close()` confuses valgrind. Before this commit,
valgrind may report the following:
```
HEAP SUMMARY:
in use at exit: 384 bytes in 1 blocks
total heap usage: 4,787 allocs, 4,786 frees, 1,379,191 bytes allocated
384 bytes in 1 blocks are possibly lost in loss record 1 of 1
at 0x483CAE9: calloc (vg_replace_malloc.c:760)
by 0x401456A: _dl_allocate_tls (in /usr/lib64/ld-2.31.so)
by 0x4BD212E: pthread_create@@GLIBC_2.2.5 (in /usr/lib64/libpthread-2.31.so)
by 0x499B662: asynchronous_job (async.c:47)
by 0x499B7DC: asynchronous_close (async.c:102)
by 0x4CFA8B: client_initialize (sd-dhcp-client.c:696)
by 0x4CFC5E: client_stop (sd-dhcp-client.c:725)
by 0x4D4589: sd_dhcp_client_stop (sd-dhcp-client.c:2134)
by 0x493C2F: link_stop_clients (networkd-link.c:620)
by 0x4126DB: manager_free (networkd-manager.c:867)
by 0x40D193: manager_freep (networkd-manager.h:97)
by 0x40DAFC: run (networkd.c:20)
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 384 bytes in 1 blocks
still reachable: 0 bytes in 0 blocks
suppressed: 0 bytes in 0 blocks
For lists of detected and suppressed errors, rerun with: -s
ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
```
This reverts commit b45c068dd8.
I think the idea was generally sound, but didn't take into account the
limitations of show-environment and how it is used. People expect to be able to
eval systemctl show-environment output in bash, and no escaping syntax is
defined for environment *names* (we only do escaping for *values*). We could
skip such problematic variables in 'systemctl show-environment', and only allow
them to be inherited directly. But this would be confusing and ugly.
The original motivation for this change was that various import operations
would fail. a4ccce22d9 changed systemctl to filter
invalid variables in import-environment.
https://gitlab.gnome.org/GNOME/gnome-session/-/issues/71 does a similar change
in GNOME. So those problematic variables should not cause failures, but just
be silently ignored.
Finally, the environment block is becoming a dumping ground. In my gnome
session 'systemctl show-environment --user' includes stuff like PWD, FPATH
(from zsh), SHLVL=0 (no idea what that is). This is not directly related to
variable names (since all those are allowed under the stricter rules too), but
I think we should start pushing people away from running import-environment and
towards importing only select variables.
https://github.com/systemd/systemd/pull/17188#issuecomment-708676511
This changes the default from putting all units into the root slice to
placing them into the app slice in the user manager. The advantage is
that we get the right behaviour in most cases, and we'll need special
case handling in all other cases anyway.
Note that we have currently defined that applications *should* start
their unit names with app-, so we could also move only these by creating
a drop-in for app-.scope and app-.service.
However, that would not answer the question on how we should manage
session.slice. And we would end up placing anything that does not fit
the system (e.g. anything started by dbus-broker currently) into the
root slice.
These should not be bundled into the link_up() operation, as that is
not (currently) called during interface configuration if the interface
already is IFF_UP, which is unrelated to the need to change the mac
to a user-defined value, or set 'nomaster' on the interface.
Additionally, there is no need to re-set the mac or re-assert nomaster
every time the interface is brought up; those should be only part of
normal initial interface configuration.
Fixes: #17391
Let's try to make collisions when multiple clients want to use the same
device less likely, by sleeping a random time on collision.
The loop device allocation protocol is inherently collision prone:
first, a program asks which is the next free loop device, then it tries
to acquire it, in a separate, unsynchronized setp. If many peers do this
all at the same time, they'll likely all collide when trying to
acquire the device, so that they need to ask for a free device again and
again.
Let's make this a little less prone to collisions, reducing the number
of failing attempts: whenever we notice a collision we'll now wait
short and randomized time, making it more likely another peer succeeds.
(This also adds a similar logic when retrying LOOP_SET_STATUS64, but
with a slightly altered calculation, since there we definitely want to
wait a bit, under all cases)
On systems that have a udev before
a7fdc6cbd3 uevents would sometimes be
eaten because of device node collisions that caused the ruleset to fail.
Let's add an (ugly) work-around for this, so that we can even work with
such an older udev.
On current kernels (5.8 for example) under some conditions I don't fully
grok it might happen that a detached loopback block device still has
partition block devices around. Accessing these partition block devices
results in EIO errors (that also fill up dmesg). These devices cannot be
claned up with LOOP_CLR_FD (since the main device already is officially
detached), nor with LOOP_CTL_DELETE (returns EBUSY as long as the
partitions still exist). This is a kernel bug. But it appears to apply
to all recent kernels. I cannot really pin down what triggers this,
suffice to say our heavy-duty test can trigger it.
Either way, let's do something about it: when we notice this state we'll
attach an empty file to it, which is guaranteed to have to part table.
This makes the partitions go away. After closing/reoping the device we
hence are good to go again. ugly workaround, but I think OK enough to
use.
The net result is: with this commit, we'll guarantee that by the time we
attach a file to the loopback device we have zero kernel partitions
associated with it. Thus if we then wait for the kernel partitions we
need to appear we should have entirely reliable behaviour even if
loopback devices by the name are heavily recycled and udev events reach
us very late.
Fixes: #16858
Previously, we'd just wait for the first moment where the kernel exposes
the same numbre of partitions as libblkid tells us. After that point we
enumerate kernel partitions and look for matching libblkid partitions.
With this change we'll instead enumerate with libblkid only, and then
wait for each kernel partition to show up with the exact parameters we
expect them to show up. Once that happens we are happy.
Care is taken to use the udev device notification messages only as hint
to recheck what the kernel actually says. That's because we are
otherwise subject to a race: we might see udev events from an earlier
use of a loopback device. After all these devices are heavily recycled.
Under the assumption that we'll get udev events for *at least* all
partitions we care about (but possibly more) we can fix the race
entirely with one more fix coming in a later commit: if we make sure
that a loopback block device has zero kernel partitions when we take
possession of it, it doesn't matter anymore if we get spurious udev
events from a previous use. All we have to do is notice when the devices
we need all popped up.
When we fall back to classic LOOP_SET_FD logic in case LOOP_CONFIGURE
didn't work we issue LOOP_CLR_FD first. But that call turns out to be
potentially async in the kernel: if something else (let's say
udev/blkid) is accessing the device the ioctl just sets the autoclear
flag and exits. Hence quite often the LOOP_SET_FD will subsequently
fail. Let's avoid the trouble, and immediately exit with EBUSY if
LOOP_CONFIGURE fails, and but remember that LOOP_CONFIGURE is not
available so that on the next iteration we go directly for LOOP_SET_FD
instead.
This adds tests to make sure that basic/env-util considers environment
variables containing \r characters invalid, and that it removes such
variables during environment cleanup in strv_env_clean*().
test-env-util has not verified this behaviour before.
As \r characters can be used to hide information, disallowing them
helps with systemd's security barrier role, even when the \r
character comes as part of a DOS style (\r\n) line ending.
Prompted-by: https://github.com/systemd/systemd/issues/17378
v246 is long released. Hence the new scheme should be named v247.
(Interesting, how we pretty systematically for the last releases changed
the scheme only every second release)
The idea is that we have strvs like list of server names or addresses, where
the majority of strings is rather short, but some are long and there can
potentially be many strings. So formattting them either all on one line or all
in separate lines leads to output that is either hard to read or uses way too
many rows. We want to wrap them, but relying on the pager to do the wrapping is
not nice. Normal text has a lot of redundancy, so when the pager wraps a line
in the middle of a word the read can understand what is going on without any
trouble. But for a high-density zero-redundancy text like an IP address it is
much nicer to wrap between words. This also makes c&p easier.
This adds a variant of TABLE_STRV which is wrapped on output (with line breaks
inserted between different strv entries).
The change table_print() is quite ugly. A second pass is added to re-calculate
column widths. Since column size is now "soft", i.e. it can adjust based on
available columns, we need to two passes:
- first we figure out how much space we want
- in the second pass we figure out what the actual wrapped columns
widths will be.
To avoid unnessary work, the second pass is only done when we actually have
wrappable fields.
A test is added in test-format-table.
Lennart Poettering
Michal Sekletár
Zbigniew Jędrzejewski-Szmek
Anita Zhang
Pat Coulthard
Dan Streetman
Yu Watanabe
Benjamin Berg
Hans Ulrich Niedermann