Add LogRateLimitIntervalSec= and LogRateLimitBurst= options for
services. If provided, these values get passed to the journald
client context, and those values are used in the rate limiting
function in the journal over the the journald.conf values.
Part of #10230
For example in a container we'd log:
Oct 17 17:01:10 rawhide systemd[1]: Started Power-Off.
Oct 17 17:01:10 rawhide systemd[1]: Forcibly powering off: unit succeeded
Oct 17 17:01:10 rawhide systemd[1]: Reached target Power-Off.
Oct 17 17:01:10 rawhide systemd[1]: Shutting down.
and on the console we'd write (in red)
[ !! ] Forcibly powering off: unit succeeded
This is not useful in any way, and the fact that we're calling an "emergency action"
is an internal implementation detail. Let's log about c-a-d and the watchdog actions
only.
The setting is now only looked at when considering an action for a job timeout
or unit start limit. It is ignored for ctrl-alt-del, SuccessAction, SuccessFailure.
v2: turn the parameter into a flag field
v3: rename Options to Flags
Let's make them typesafe, and let's add a nice macro helper for checking
if we are in a test run, which should make testing for this much easier
to read for most cases.
Cgroup v2 provides the eBPF-based device controller, which isn't currently
supported by systemd. This commit aims to provide such support.
There are no user-visible changes, just the device policy and whitelist
start working if cgroup v2 is used.
This shouldn't change control flow, with one exception: we won't send
notifications for boot progress to plymouth anymore during reload, which
is something we really shouldn't.
Allows configuring the watchdog signal (with a default of SIGABRT).
This allows an alternative to SIGABRT when coredumps are not desirable.
Appropriate references to SIGABRT or aborting were renamed to reflect
more liberal watchdog signals.
Closes#8658
Previously, we'd act immediately on StopWhenUnneeded= when a unit state
changes. With this rework we'll maintain a queue instead: whenever
there's the chance that StopWhenUneeded= might have an effect we enqueue
the unit, and process it later when we have nothing better to do.
This should make the implementation a bit more reliable, as the unit notify event
cannot immediately enqueue tons of side-effect jobs that might
contradict each other, but we do so only in a strictly ordered fashion,
from the main event loop.
This slightly changes the check when to consider a unit "unneeded".
Previously, we'd assume that a unit in "deactivating" state could also
be cleaned up. With this new logic we'll only consider units unneeded
that are fully up and have no job queued. This means that whenever
there's something pending for a unit we won't clean it up.
RootImage= may require the following settings
```
DeviceAllow=/dev/loop-control rw
DeviceAllow=block-loop rwm
DeviceAllow=block-blkext rwm
```
This adds the following settings implicitly when RootImage= is
specified.
Fixes#9737.
Usecase is to allow changing the final kill from SIGKILL to SIGQUIT which
should create a core dump useful for debugging why the service didn't stop
with the SIGTERM
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Since bb28e68477 parsing failures of
certain unit file settings will result in load failures of units. This
introduces a new load state "bad-setting" that is entered in precisely
this case.
With this addition error messages on bad settings should be a lot more
explicit, as we don't have to show some generic "errno" error in that
case, but can explicitly say that a bad setting is at fault.
Internally this unit load state is entered as soon as any configuration
loader call returns ENOEXEC. Hence: config parser calls should return
ENOEXEC now for such essential unit file settings. Turns out, they
generally already do.
Fixes: #9107
This is very similar to the existing unit method coldplug() but is
called a bit later. The idea is that that coldplug() restores the unit
state from before any prior reload/restart, i.e. puts the deserialized
state in effect. The catchup() call is then called a bit later, to
catch up with the system state for which we missed notifications while
we were reloading. This is only really useful for mount, swap and device
mount points were we should be careful to generate all missing unit
state change events (i.e. call unit_notify() appropriately) for
everything that happened while we were reloading.
This reworks how systemd tracks processes on cgroupv1 systems where
cgroup notification is not reliable. Previously, whenever we had reason
to believe that new processes showed up or got removed we'd scan the
cgroup of the scope or service unit for new processes, and would tidy up
the list of PIDs previously watched. This scanning is relatively slow,
and does not scale well. With this change behaviour is changed: instead
of scanning for new/removed processes right away we do this work in a
per-unit deferred event loop job. This event source is scheduled at a
very low priority, so that it is executed when we have time but does not
starve other event sources. This has two benefits: this expensive work is
coalesced, if events happen in quick succession, and we won't delay
SIGCHLD handling for too long.
This patch basically replaces all direct invocation of
unit_watch_all_pids() in scope.c and service.c with invocations of the
new unit_enqueue_rewatch_pids() call which just enqueues a request of
watching/tidying up the PID sets (with one exception: in
scope_enter_signal() and service_enter_signal() we'll still do
unit_watch_all_pids() synchronously first, since we really want to know
all processes we are about to kill so that we can track them properly.
Moreover, all direct invocations of unit_tidy_watch_pids() and
unit_synthesize_cgroup_empty_event() are removed too, when the
unit_enqueue_rewatch_pids() call is invoked, as the queued job will run
those operations too.
All of this is done on cgroupsv1 systems only, and is disabled on
cgroupsv2 systems as cgroup-empty notifications are reliable there, and
we do not need SIGCHLD events to track processes there.
Fixes: #9138
This way we don't need to repeat the argument twice.
I didn't replace all instances. I think it's better to leave out:
- asserts
- comparisons like x & y == x, which are mathematically equivalent, but
here we aren't checking if flags are set, but if the argument fits in the
flags.
The function is similar to path_kill_slashes() but also removes
initial './', trailing '/.', and '/./' in the path.
When the second argument of path_simplify() is false, then it
behaves as the same as path_kill_slashes(). Hence, this also
replaces path_kill_slashes() with path_simplify().
This adds a flags parameter to unit_notify() which can be used to pass
additional notification information to the function. We the make the old
reload_failure boolean parameter one of these flags, and then add a new
flag that let's unit_notify() if we are configured to restart the
service.
Note that this adjusts behaviour of systemd to match what the docs say.
Fixes: #8398
When I see "test", I have to think three times what the return value
means. With "below" this is immediately clear. ratelimit_below(&limit)
sounds almost like English and is imho immediately obvious.
(I also considered ratelimit_ok, but this strongly implies that being under the
limit is somehow better. Most of the times this is true, but then we use the
ratelimit to detect triple-c-a-d, and "ok" doesn't fit so well there.)
C.f. a1bcaa07.
Scope units are populated from PIDs specified by the bus client. We do
that when a scope is started. We really shouldn't allow scopes to be
started multiple times, as the PIDs then might be heavily out of date.
Moreover, clients should have the guarantee that any scope they allocate
has a clear runtime cycle which is not repetitive.
Double newlines (i.e. one empty lines) are great to structure code. But
let's avoid triple newlines (i.e. two empty lines), quadruple newlines,
quintuple newlines, …, that's just spurious whitespace.
It's an easy way to drop 121 lines of code, and keeps the coding style
of our sources a bit tigther.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Currently we add target dependencies while we are loading units. This
can create ordering loops even if configuration doesn't contain any
loop. Take for example following configuration,
$ systemctl get-default
multi-user.target
$ cat /etc/systemd/system/test.service
[Unit]
After=default.target
[Service]
ExecStart=/bin/true
[Install]
WantedBy=multi-user.target
If we encounter such unit file early during manager start-up (e.g. load
queue is dispatched while enumerating devices due to SYSTEMD_WANTS in
udev rules) we would add stub unit default.target and we order it Before
test.service. At the same time we add implicit Before to
multi-user.target. Later we merge two units and we create ordering cycle
in the process.
To fix the issue we will now never add any target dependencies until we
loaded all the unit files and resolved all the aliases.
Yu Watanabe
Lennart Poettering
Anita Zhang
Zbigniew Jędrzejewski-Szmek
Roman Gushchin
Jon Ringle
Chris Lamb
Felipe Sateler
David Tardon
Michal Sekletar