I have no idea what went on in my mind when I used a path in /var/ for
the tpm2 event log we now keep for userspace measurements. The
measurements are only valid for the current boot, hence should not be
persisted (in particular as they cannot be rotated, hence should not
grow without bounds).
Fix that, simply move from /var/log/ to /run/log/.
Before this fix, when recursive-errors was set to 'no' during a systemd-analyze
verification, the parent slice was checked regardless. The 'no' setting means that,
only the specified unit should be looked at and verified and errors in the slices should be
ignored. This commit fixes that issue.
Example:
Say we have a sample.service file:
[Unit]
Description=Sample Service
[Service]
ExecStart=/bin/echo "a"
Slice=support.slice
Before Change:
systemd-analyze verify --recursive-errors=no maanya/sample.service
Assertion 'u' failed at src/core/unit.c:153, function unit_has_name(). Aborting.
Aborted (core dumped)
After Change:
systemd-analyze verify --recursive-errors=no maanya/sample.service
{No errors}
Add a new boolean for units, SurviveFinalKillSignal=yes/no. Units that
set it will not have their process receive the final sigterm/sigkill in
the shutdown phase.
This is implemented by checking if a process is part of a cgroup marked
with a user.survive_final_kill_signal xattr (or a trusted xattr if we
can't set a user one, which were added only in kernel v5.7 and are not
supported in CentOS 8).
'systemctl status /../dev' now looks for 'dev.mount', not '-..-dev.service',
and 'systemctl status /../foo' looks for 'foo.mount', not '-..-foo.service'. I
think this much more useful. I think the escaping is not very useful, so I plan
to submit a later series which changes that behaviour. But I think this first
step here is already useful on its own.
Note that the patch is smaller than it seems: before, is_device_path() would
return true only for absolute paths, so moving of is_device_path() under the
path_is_absolute() conditional doesn't influence the logic.
From RFC 9476:
Because names beneath .alt are in an alternative namespace, they have no
significance in the regular DNS context. DNS stub and recursive
resolvers do not need to look them up in the DNS context.
See: https://datatracker.ietf.org/doc/html/rfc9476#name-the-alt-namespace
`MatchPattern` for regular-file and directory as target can now match
subdirectories This is useful to install files for examples in `.extra.d`
directories:
```
[Target]
Type=regular-file
Path=/EFI/Linux
PathRelativeTo=boot
MatchPattern=gnomeos_@v.efi.extra.d/apparmor.addon.efi
```
The if the directories in the path do not exist, they will be created. Whereas
the part in `Path` is not created.
So, unfortunately oomd uses "io.system." rather than "io.systemd." as
prefix for its sockets. This is a mistake, and doesn't match the
Varlink interface naming or anything else in oomd.
hence, let's fix that.
Given that this is an internal protocol between PID1 and oomd let's
simply change this without retaining compat.
The tool initially just measured the boot phase, but was subsequently
extended to measure file system and machine IDs, too. At AllSystemsGo
there were request to add more, and make the tool generically
accessible.
Hence, let's rename the binary (but not the pcrphase services), to make
clear the tool is not just measureing the boot phase, but a lot of other
things too.
The tool is located in /usr/lib/ and still relatively new, hence let's
just rename the binary and be done with it, while keeping the unit names
stable.
While we are at it, also move the tool out of src/boot/ and into its own
src/pcrextend/ dir, since it's not really doing boot related stuff
anymore.
On slower/overloaded systems it may take a bit for the swtpm socket
to show up:
I: Started swtpm as PID 189419 with state dir /tmp/tmp.pWqUutuGUj
I: Configured emulated TPM2 device tpm-spapr
+ tee /var/tmp/systemd-test-TEST-70-TPM2_1/console.log
+ timeout --foreground 1200 /bin/qemu-system-ppc64le -smp 4 ...
qemu-system-ppc64le: -chardev socket,id=chrtpm,path=/tmp/tmp.pWqUutuGUj/sock: Failed to connect to '/tmp/tmp.pWqUutuGUj/sock': No such file or directory
E: qemu failed with exit code 1
Spotted regularly in the ppc64le cron job and in some Ubuntu CI/CentOS CI
pr runs [0].
[0] https://github.com/systemd/systemd/pull/29183#issuecomment-1721727927
We can't do anything about them anyway, and most importantly this seems
to alleviate systemd/systemd-centos-ci#660, which should make the CIs
a bit less angry (at least until the issue is addressed properly).
This module is only available on PPC hw, so avoid trying to load it elsewhere, as it generates a misleading error message in the logs:
modprobe: FATAL: Module tpm_ibmvtpm not found in directory /lib/modules/5.15.0-83-generic
The existing signal doesn't say which type of shutdown is going to happen.
With the introduction of soft-reboot, it is useful to have this information
broadcasted, so that clients can choose to do different things based on the
reboot type.
Add a{sv} as the payload so that more metadata can be added later if
needed, without needing to add yet another signal.
Send both old and new signal for backward compatibility, and send the new
one first so that clients can just wait for the first one on both old and
new systems.
In general, it's better to avoid a negation. And "!" is special, because it is
used for history expansion, i.e. the same command would behave differently if
pasted on the command line.
Inspired by 4a899c5a23.
This reverts commits
- 9ae3624889
"test-execute: add tests for credentials directory with mount namespace"↲
- 94fe4cf255
"core: do not leak mount for credentials directory if mount namespace is enabled",
- 7241b9cd72
"core/credential: make setup_credentials() return path to credentials directory",
- fbaf3b23ae
"core: set $CREDENTIALS_DIRECTORY only when we set up credentials"
Before the commits, credentials directory set up on ExecStart= was kept
on e.g. ExecStop=. But, with the changes, if a service requests a
private mount namespace, the credentials directory is discarded after
ExecStart= is finished.
Let's revert the change, and find better way later.
Addresses the post-merge comment
https://github.com/systemd/systemd/pull/28787#issuecomment-1690614202.
Otherwise we'll get stuck waiting indefinitely if the test socket unit
fails to fail due the trigger limit, i.e.:
[ 111.104906] testsuite-07.sh[743]: + systemctl start issue2467.socket
[ OK ] Listening on issue2467.socket.
[ 111.746465] testsuite-07.sh[743]: + nc -w20 -U /run/test.ctl
Starting systemd-tmpfiles-clean.service...
[ OK ] Finished systemd-tmpfiles-clean.service.
qemu-system-x86_64: terminating on signal 15 from pid 565814 (timeout)
E: Test timed out after 1800s
With the idle timeout we should give up after 20 seconds, allowing the next
statement to properly fail:
[ 34.233084] testsuite-07.sh[450]: + systemctl start issue2467.socket
[ 35.475392] testsuite-07.sh[450]: + nc -i20 -w20 -U /run/test.ctl
[ 56.122941] testsuite-07.sh[458]: Ncat: Idle timeout expired (20000 ms).
[ 56.140871] testsuite-07.sh[450]: + :
[ 56.145460] testsuite-07.sh[450]: + timeout 10 bash -c 'while ! [[ "$(systemctl show issue2467.socket -P ActiveState)" == failed ]]; do sleep .5; done'
[ 66.197623] testsuite-07.sh[446]: + echo 'Subtest /usr/lib/systemd/tests/testdata/units/testsuite-07.issue-2467.sh failed'
We don't care about the ordering, so we may just as well drop the numerical
prefixes that we normally use for sorting. Also rename some other samples
to keep width of output down to reasonable width.
Lennart Poettering
Daan De Meyer
Maanya Goenka
Luca Boccassi
Frantisek Sumsal
Zbigniew Jędrzejewski-Szmek
Bertrand Jacquin
Valentin David
Topi Miettinen
Mike Yuan
Dan Streetman
Yu Watanabe
Jan Janssen
Susant Sahani
pelaufer