When fuzzing, the following happens:
- we parse 'data' and produce an argv array,
- one of the items in argv is assigned to arg_host,
- the argv array is subsequently freed by strv_freep(), and arg_host has a dangling symlink.
In normal use, argv is static, so arg_host can never become a dangling pointer.
In fuzz-systemctl-parse-argv, if we repeatedly parse the same array, we
have some dangling pointers while we're in the middle of parsing. If we parse
the same array a second time, at the end all the dangling pointers will have been
replaced again. But for a short time, if parsing one of the arguments uses another
argument, we would use a dangling pointer.
Such a case occurs when we have --host=… --boot-loader-entry=help. The latter calls
acquire_bus() which uses arg_host.
I'm not particularly happy with making the code more complicated just for
fuzzing, but I think it's better to resolve this, even if the issue cannot
occur in normal invocations, than to deal with fuzzer reports.
Should fix https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=31714.
argv[0] might be prefixed by a path, and we shouldn't get confused by
that. Hence provide a simple helper call that abstracts the checking
away, which we can use everywhere, and expose the same behaviour, even
if argv[0] is not set.
(While we are at it, port all other multi-call binaries over to the new
helper, too)
Follow-up for: d41a9e4fc1
--no-legend is replaced by --legend=no.
--quiet now implies --legend=no, but --legend=yes may be used to override that.
--quiet controls hints and warnings and such, and --legend controls just the
legends. I think it makes sense to allow both to controlled independently, in
particular --quiet --legend makes sense when using systemctl in a script to
provide some user-visible output.
Fixes#18560.
This is almost equivalent to 'busctl call-method org.freedesktop.systemd1
/org/freedesktop/systemd1 org.freedesktop.systemd1.Manager EnqueueMarkedJobs',
but waits for the jobs to finish.
The immediate motivation is to allow fuzz-systemctl-parse-argv to cover also
the other code paths. p_i_s_n is not getting set (and it probably shouldn't),
so the fuzzer would only cover the paths for ./systemctl, and not ./reboot,
etc. Looking at argv[0] instead, which is passed as part of the fuzzer data,
fixes that.
But I think in general it's more correct to look at argv[0] here: after all we
have all the information available through local variables and shouldn't go out
of our way to look at a global.
Does what the name suggests. Obviously inspired by sudoers, but note that
our tools are not supposed to be installed suid, so there is no privilege
boundary to cross here.
The last release of Upstart was July 2014 [1], and there have been no new
commits to the repo. We should move on too.
[1] https://lists.ubuntu.com/archives/upstart-devel/2014-July/003313.html
The only real support was in the code that looked for $PREVLEVEL.
https://codesearch.debian.net/search?q=PREVLEVEL&literal=1&perpkg=1 shows this
string in our own code (or the copy in elogind), our own man pages, and init
scripts for two packages (brltty, salt), which shouldn't be used with systemd.
(And both *check* for PREVLEVEL, and don't set it. So most likely nothing at
all sets it.)
This effectively reverts 41d1f469cf.
Before this, e.g., `networkctl reload` invoked by `systemctl reload systemd-networkd.service`
does not produce debugging logs even if systemd.log-level=debug is set. This fixes
the issue.
I think this formatting was originally used because it simplified
adding new options to the help messages. However, these days, most
tools their help message end with "\nSee the %s for details.\n" so
the final line almost never has to be edited which eliminates the
benefit of the custom formatting used for printf() help messages.
Let's make things more consistent and use the same formatting for
printf() help messages that we use everywhere else.
Prompted by https://github.com/systemd/systemd/pull/18355#discussion_r567241580
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
As described in #2680, systemctl did ignore inhibitors if it is not
attached to a tty to allow scripts to ignore inhibitors automatically.
This pull request preserves this behavior but allows scripts to
explicit check inhibitors if required.
The new parameter '--check-inhibitors=yes' enables this feature.
The old parameter '-i'/'--ignore-inhibitors' was deprecated in favor
of '--check-inhibitors=no', the default behaviour can be specified
with '--check-inhibitors=auto'.
The new parameter is also described in the documentations and shell
completions found here.
Importing the full environment is convenient, but it doesn't work too well in
practice, because we get a metric ton of shell-specific crap that should never
end up in the global environment block:
$ systemctl --user show-environment
...
SHELL=/bin/zsh
AUTOJUMP_ERROR_PATH=/home/zbyszek/.local/share/autojump/errors.log
AUTOJUMP_SOURCED=1
CONDA_SHLVL=0
CVS_RSH=ssh
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
DESKTOP_SESSION=gnome
DISPLAY=:0
FPATH=/usr/share/Modules/init/zsh-functions:/usr/local/share/zsh/site-functions:/usr/share/zsh/site-functions:/usr/share/zsh/5.8/functions
GDMSESSION=gnome
GDM_LANG=en_US.UTF-8
GNOME_SETUP_DISPLAY=:1
GUESTFISH_INIT=$'\\e[1;34m'
GUESTFISH_OUTPUT=$'\\e[0m'
GUESTFISH_PS1=$'\\[\\e[1;32m\\]><fs>\\[\\e[0;31m\\] '
GUESTFISH_RESTORE=$'\\e[0m'
HISTCONTROL=ignoredups
HISTSIZE=1000
LOADEDMODULES=
OLDPWD=/home/zbyszek
PWD=/home/zbyszek
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
QTLIB=/usr/lib64/qt-3.3/lib
QT_IM_MODULE=ibus
SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS=0
SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/2612,unix/unix:/tmp/.ICE-unix/2612
SHLVL=0
STEAM_FRAME_FORCE_CLOSE=1
TERM=xterm-256color
USERNAME=zbyszek
WISECONFIGDIR=/usr/share/wise2/
...
Plenty of shell-specific and terminal-specific stuff that have no global
significance.
Let's start warning when this is used to push people towards importing only
specific variables.
Putative NEWS entry:
* systemctl import-environment will now emit a warning when called without
any arguments (i.e. to import the full environment block of the called
program). This command will usually be invoked from a shell, which means
that it'll inherit a bunch of variables which are specific to that shell,
and usually to the tty the shell is connected to, and don't have any
meaning in the global context of the system or user service manager.
Instead, only specific variables should be imported into the manager
environment block.
Similarly, programs which update the manager environment block by directly
calling the D-Bus API of the manager, should also push specific variables,
and not the full inherited environment.
This is unfortunately harder to implement than it sounds. The user's bus
is bound a to the user's lifecycle after all (i.e. only exists as long
as the user has at least one PAM session), and the path dynamically (at
least theoretically, in practice it's going to be the same always)
generated via $XDG_RUNTIME_DIR in /run/.
To fix this properly, we'll thus go through PAM before connecting to a
user bus. Which is hard since we cannot just link against libpam in the
container, since the container might have been compiled entirely
differently. So our way out is to use systemd-run from outside, which
invokes a transient unit that does PAM from outside, doing so via D-Bus.
Inside the transient unit we then invoke systemd-stdio-bridge which
forwards D-Bus from the user bus to us. The systemd-stdio-bridge makes
up the PAM session and thus we can sure tht the bus exists at least as
long as the bus connection is kept.
Or so say this differently: if you use "systemctl -M lennart@foobar"
now, the bus connection works like this:
1. sd-bus on the host forks off:
systemd-run -M foobar -PGq --wait -pUser=lennart -pPAMName=login systemd-stdio-bridge
2. systemd-run gets a connection to the "foobar" container's
system bus, and invokes the "systemd-stdio-bridge" binary as
transient service inside a PAM session for the user "lennart"
3. The systemd-stdio-bridge then proxies our D-Bus traffic to
the user bus.
sd-bus (on host) → systemd-run (on host) → systemd-stdio-bridge (in container)
Complicated? Well, to some point yes, but otoh it's actually nice in
various other ways, primarily as it makes the -H and -M codepaths more
alike. In the -H case (i.e. connect to remote host via SSH) a very
similar three steps are used. The only difference is that instead of
"systemd-run" the "ssh" binary is used to invoke the stdio bridge in a
PAM session of some other system. Thus we get similar implementation and
isolation for similar operations.
Fixes: #14580
This is just some refactoring: shifting around of code, not change in
codeflow.
This splits up the way too huge systemctl.c in multiple more easily
digestable files. It roughly follows the rule that each family of verbs
gets its own .c/.h file pair, and so do all the compat executable names
we support. Plus three extra files for sysv compat (which existed before
already, but I renamed slightly, to get the systemctl- prefix lik
everything else), a -util file with generic stuff everything uses, and a
-logind file with everything that talks directly to logind instead of
PID1.
systemctl is still a bit too complex for my taste, but I think this way
itc omes in a more digestable bits at least.
No change of behaviour, just reshuffling of some code.
It's an auxiliary function to the UnitInfo structures, and very generic.
Let's hence move it over to the other code operating with UnitInfo, even
if it's not used by code outside of systemctl (yet).
With new directive SystemCallLog= it's possible to list system calls to be
logged. This can be used for auditing or temporarily when constructing system
call filters.
---
v5: drop intermediary, update HASHMAP_FOREACH_KEY() use
v4: skip useless debug messages, actually parse directive
v3: don't declare unused variables with old libseccomp
v2: fix build without seccomp or old libseccomp
Symbolic names and number in the appropriate range are allowed
(log_level_from_string() DTRT already).
The target names are more messy, so we leave the verification to the service.
Heavily inspired by #15622. This adds:
systemctl service-log-level systemd-resolved
systemctl service-log-level systemd-resolved info
systemctl service-log-target systemd-resolved
systemctl service-log-target systemd-resolved console
We already have systemctl verbs log-level, log-target, and service-watchdogs.
Those two new verbs tie nicely into this scheme.
The list was rather ad hoc, with "reset-failed" sandwiched between
"help" and "list-dependencies". Since a person will usually either want
to introspect state in various ways or modify state in a certain way, let's
put all the introspection commands together and all the ones that actually
have an effect second.
In various cases, we would say 'return log_warning()' or 'return log_error()'. Those
functions return 0 if no error is passed in. For log_warning or log_error this doesn't
make sense, and we generally want to propagate the error. In the few cases where
the error should be ignored, I think it's better to split it in two, and call 'return 0'
on a separate line.
Follow the same model established for RootImage and RootImageOptions,
and allow to either append a single list of options or tuples of
partition_number:options.
Timestamps for unit start/stop are recorded with microsecond granularity,
but status and show truncate to second granularity by default.
Add a --timestamp=pretty|us|utc option to allow including the microseconds
or to use the UTC TZ to all timestamps printed by systemctl.
Follows the same pattern and features as RootImage, but allows an
arbitrary mount point under / to be specified by the user, and
multiple values - like BindPaths.
Original implementation by @topimiettinen at:
https://github.com/systemd/systemd/pull/14451
Reworked to use dissect's logic instead of bare libmount() calls
and other review comments.
Thanks Topi for the initial work to come up with and implement
this useful feature.
