This improves the BPF/cgroup detection logic, and looks whether
BPF_ALLOW_MULTI is supported. This flag allows execution of multiple
BPF filters in a recursive fashion for a whole cgroup tree. It enables
us to properly report IP accounting for slice units, as well as
delegation of BPF support to units without breaking our own IP
accounting.
Currently we allowed delegation for alluntis with cgroup backing
except for slices. Let's make this a bit more strict for now, and only
allow this in service and scope units.
Let's also add a generic accessor unit_cgroup_delegate() for checking
whether a unit has delegation turned on that checks the new bool first.
Also, when doing transient units, let's explcitly refuse turning on
delegation for unit types that don#t support it. This is mostly
cosmetical as we wouldn't act on the delegation request anyway, but
certainly helpful for debugging.
systemd creates several device nodes in /run/systemd/inaccessible/.
This makes CGroup's settings related to IO can take device node
files in the directory.
Let's replace usage of fputc_unlocked() and friends by __fsetlocking(f,
FSETLOCKING_BYCALLER). This turns off locking for the entire FILE*,
instead of doing individual per-call decision whether to use normal
calls or _unlocked() calls.
This has various benefits:
1. It's easier to read and easier not to forget
2. It's more comprehensive, as fprintf() and friends are covered too
(as these functions have no _unlocked() counterpart)
3. Philosophically, it's a bit more correct, because it's more a
property of the file handle really whether we ever pass it on to another
thread, not of the operations we then apply to it.
This patch reworks all pieces of codes that so far used fxyz_unlocked()
calls to use __fsetlocking() instead. It also reworks all places that
use open_memstream(), i.e. use stdio FILE* for string manipulations.
Note that this in some way a revert of 4b61c87511.
Let's make sure that when we return a D-Bus error, we return a native
one, if we generate it ourselves, and use errno-based error
synthetization only if we received an errno ourselves. Yes, this makes
things slightly longer, but is highly misleading as we propagate D-Bus
errors, and not errnos to the client.
This majorly refactors the transient unit file and drop-in writing
logic, so that we properly C-escape and specifier-escape (% → %%)
everything we write out, so that when we read it back again, specifiers
are parsed that aren't supposed to be parsed.
This renames unit_write_drop_in() and friends by unit_write_setting().
The name change is supposed to clarify that the functions are not only
used to write drop-in files, but also transient unit files.
The previous "mode" parameter to this function is replaced by a more
generic "flags", which knows additional flags for implicit C-style and
specifier escaping before writing things out. This can cover most
properties where either form of escaping is defined. For the cases where
this isn't sufficient, we add helpers unit_escape_setting() and
unit_concat_strv() for escaping individual strings or strvs properly.
While we are at it, we also prettify generation of transient unit files:
we try to reduce the number of section headers written out: previously
we'd write the right section header our for each setting. With this
change we do so only if the setting lives in a different section than
the one before.
(This should also be considered preparation for when we add proper APIs
to systemd to write normal, persistant unit files through the bus API)
Before this, assigning empty string to Delegate= makes no change to the
controller list. This is inconsistent to the other options that take list
of strings. After this, when empty string is assigned to Delegate=, the
list of controllers is reset. Such behavior is consistent to other options
and useful for drop-in configs.
Closes#7334.
Let's reduce the amount of noise a bit, there's little point in
complaining loudly about every single unit like this, let's complain
only about the first one, and then downgrade the log level to LOG_DEBUG
for the other cases.
Fixes: #7188
Previously it was not possible to select which controllers to enable for
a unit where Delegate=yes was set, as all controllers were enabled. With
this change, this is made configurable, and thus delegation units can
pick specifically what they want to manage themselves, and what they
don't care about.
As a follow-up for db3f45e2d2 let's do the
same for all other cases where we create a FILE* with local scope and
know that no other threads hence can have access to it.
For most cases this shouldn't change much really, but this should speed
dbus introspection and calender time formatting up a bit.
We would write
[Slice]
CPUQuota=1844674407370955%
which is (numerically) correct, but it seems better to just write
[Slice]
CPUQuota=
which is interpreted as USEC_INFINITY by the parser in config_parse_cpu_quota().
Fixes#5965.
Unfortunately, due to the disagreements in the kernel development community,
CPU controller cgroup v2 support has not been merged and enabling it requires
applying two small out-of-tree kernel patches. The situation is explained in
the following documentation.
https://git.kernel.org/cgit/linux/kernel/git/tj/cgroup.git/tree/Documentation/cgroup-v2-cpu.txt?h=cgroup-v2-cpu
While it isn't clear what will happen with CPU controller cgroup v2 support,
there are critical features which are possible only on cgroup v2 such as
buffered write control making cgroup v2 essential for a lot of workloads. This
commit implements systemd CPU controller support on the unified hierarchy so
that users who choose to deploy CPU controller cgroup v2 support can easily
take advantage of it.
On the unified hierarchy, "cpu.weight" knob replaces "cpu.shares" and "cpu.max"
replaces "cpu.cfs_period_us" and "cpu.cfs_quota_us". [Startup]CPUWeight config
options are added with the usual compat translation. CPU quota settings remain
unchanged and apply to both legacy and unified hierarchies.
v2: - Error in man page corrected.
- CPU config application in cgroup_context_apply() refactored.
- CPU accounting now works on unified hierarchy.
That way, we can neatly keep this in line with the new TasksMaxScale= option.
Note that we didn't release a version with MemoryLimitByPhysicalMemory= yet,
hence this change should be unproblematic without breaking API.
This adds support for a TasksMax=40% syntax for specifying values relative to
the system's configured maximum number of processes. This is useful in order to
neatly subdivide the available room for tasks within containers.
https://github.com/systemd/systemd/pull/3685 introduced
/run/systemd/inaccessible/{chr,blk} to map inacessible devices,
this patch allows systemd running inside a nspawn container to create
/run/systemd/inaccessible/{chr,blk}.
The unit files already accept relative, percent-based memory limit
specification, let's make sure "systemctl set-property" support this too.
Since we want the physical memory size of the destination machine to apply we
pass the percentage in a new set of properties that only exist for this
purpose, and can only be set.
On the unified hierarchy, memory controller implements three control knobs -
low, high and max which enables more useable and versatile control over memory
usage. This patch implements support for the three control knobs.
* MemoryLow, MemoryHigh and MemoryMax are added for memory.low, memory.high and
memory.max, respectively.
* As all absolute limits on the unified hierarchy use "max" for no limit, make
memory limit parse functions accept "max" in addition to "infinity" and
document "max" for the new knobs.
* Implement compatibility translation between MemoryMax and MemoryLimit.
v2:
- Fixed missing else's in config_parse_memory_limit().
- Fixed missing newline when writing out drop-ins.
- Coding style updates to use "val > 0" instead of "val".
- Minor updates to documentation.
Except for per-device BlockIO, IO and DeviceAllow/Deny settings, all were
missing newline causing the next drop-in to be concatenated at the end of the
line. Fix it.
CGroupBlockIODeviceBandwith is used to keep track of IO bandwidth limits for
legacy cgroup hierarchies. Unlike the unified hierarchy counterpart
CGroupIODeviceLimit, a CGroupBlockIODeviceBandwiddth records either a read or
write limit and has a couple issues.
* There's no way to clear specific config entry.
* When configs are cleared for an IO direction of a unit, the kernel settings
aren't cleared accordingly creating discrepancies.
This patch updates CGroupBlockIODeviceBandwidth so that it behaves similarly to
CGroupIODeviceLimit - each entry records both rbps and wbps limits and is
cleared if both are at default values after kernel settings are updated.
cgroup IO controller supports maximum limits for both bandwidth and IOPS but
systemd resource control currently only supports bandwidth limits. This patch
adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy
is in use.
It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy
hierarchies but IO control on legacy hierarchies is half-broken anyway, so
let's leave it alone for now.
Currently, there are two cgroup IO limits, bandwidth max for read and write,
and they are hard-coded in various places. This is fine for two limits but IO
is expected to grow more limits - low, high and max limits for bandwidth and
IOPS - and hard-coding each limit won't make sense.
This patch replaces hard-coded limits with an array indexed by
CGroupIOLimitType and accompanying string and default value tables so that new
limits can be added trivially.
On the unified hierarchy, blkio controller is renamed to io and the interface
is changed significantly.
* blkio.weight and blkio.weight_device are consolidated into io.weight which
uses the standardized weight range [1, 10000] with 100 as the default value.
* blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max.
Expansion of throttling features is being worked on to support
work-conserving absolute limits (io.low and io.high).
* All stats are consolidated into io.stats.
This patchset adds support for the new interface. As the interface has been
revamped and new features are expected to be added, it seems best to treat it
as a separate controller rather than trying to expand the blkio settings
although we might add automatic translation if only blkio settings are
specified.
* io.weight handling is mostly identical to blkio.weight[_device] handling
except that the weight range is different.
* Both read and write bandwidth settings are consolidated into
CGroupIODeviceLimit which describes all limits applicable to the device.
This makes it less painful to add new limits.
* "max" can be used to specify the maximum limit which is equivalent to no
config for max limits and treated as such. If a given CGroupIODeviceLimit
doesn't contain any non-default configs, the config struct is discarded once
the no limit config is applied to cgroup.
* lookup_blkio_device() is renamed to lookup_block_device().
Signed-off-by: Tejun Heo <htejun@fb.com>
Let's make sure that we follow the same codepaths when adjusting a
cgroup property via the dbus SetProperty() call, and when we execute the
StartupCPUShares= effect.
Let's stop using the "unsigned long" type for weights/shares, and let's
just use uint64_t for this, as that's what we expose on the bus.
Unify parsers, and always validate the range for these fields.
Correct the default blockio weight to 500, since that's what the kernel
actually uses.
When parsing the weight/shares settings from unit files accept the empty
string as a way to reset the weight/shares value. When getting it via
the bus, uniformly map (uint64_t) -1 to unset.
Open up StartupCPUShares= and StartupBlockIOWeight= to transient units.
This adds support for the new "pids" cgroup controller of 4.3 kernels.
It allows accounting the number of tasks in a cgroup and enforcing
limits on it.
This adds two new setting TasksAccounting= and TasksMax= to each unit,
as well as a gloabl option DefaultTasksAccounting=.
This also updated "cgtop" to optionally make use of the new
kernel-provided accounting.
systemctl has been updated to show the number of tasks for each service
if it is available.
This patch also adds correct support for undoing memory limits for units
using a MemoryLimit=infinity syntax. We do the same for TasksMax= now
and hence keep things in sync here.
This patch set adds full support the new unified cgroup hierarchy logic
of modern kernels.
A new kernel command line option "systemd.unified_cgroup_hierarchy=1" is
added. If specified the unified hierarchy is mounted to /sys/fs/cgroup
instead of a tmpfs. No further hierarchies are mounted. The kernel
command line option defaults to off. We can turn it on by default as
soon as the kernel's APIs regarding this are stabilized (but even then
downstream distros might want to turn this off, as this will break any
tools that access cgroupfs directly).
It is possibly to choose for each boot individually whether the unified
or the legacy hierarchy is used. nspawn will by default provide the
legacy hierarchy to containers if the host is using it, and the unified
otherwise. However it is possible to run containers with the unified
hierarchy on a legacy host and vice versa, by setting the
$UNIFIED_CGROUP_HIERARCHY environment variable for nspawn to 1 or 0,
respectively.
The unified hierarchy provides reliable cgroup empty notifications for
the first time, via inotify. To make use of this we maintain one
manager-wide inotify fd, and each cgroup to it.
This patch also removes cg_delete() which is unused now.
On kernel 4.2 only the "memory" controller is compatible with the
unified hierarchy, hence that's the only controller systemd exposes when
booted in unified heirarchy mode.
This introduces a new enum for enumerating supported controllers, plus a
related enum for the mask bits mapping to it. The core is changed to
make use of this everywhere.
This moves PID 1 into a new "init.scope" implicit scope unit in the root
slice. This is necessary since on the unified hierarchy cgroups may
either contain subgroups or processes but not both. PID 1 hence has to
move out of the root cgroup (strictly speaking the root cgroup is the
only one where processes and subgroups are still allowed, but in order
to support containers nicey, we move PID 1 into the new scope in all
cases.) This new unit is also used on legacy hierarchy setups. It's
actually pretty useful on all systems, as it can then be used to filter
journal messages coming from PID 1, and so on.
The root slice ("-.slice") is now implicitly created and started (and
does not require a unit file on disk anymore), since
that's where "init.scope" is located and the slice needs to be started
before the scope can.
To check whether we are in unified or legacy hierarchy mode we use
statfs() on /sys/fs/cgroup. If the .f_type field reports tmpfs we are in
legacy mode, if it reports cgroupfs we are in unified mode.
This patch set carefuly makes sure that cgls and cgtop continue to work
as desired.
When invoking nspawn as a service it will implicitly create two
subcgroups in the cgroup it is using, one to move the nspawn process
into, the other to move the actual container processes into. This is
done because of the requirement that cgroups may either contain
processes or other subgroups.
Lennart Poettering
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
WaLyong Cho
Tejun Heo
Alessandro Puccetti
Daniel Mack
Nicolas Cornu
Thomas Hindoe Paaboel Andersen