If a path passes though an autofs filesystem, then accessing
the path might trigger and automount. As systemd-tmpfiles is run before
the network is up, and as automounts are often used for networked
filesystems, this can cause a deadlock.
So chase_symlinks is enhance to accept a new flag which tells it
to check for autofs, and return -EREMOTE if autofs is found.
tmpfiles is changed to check just before acting on a path so that it
can avoid autofs even if a symlink was created earlier by tmpfiles
that would send this path through an autofs.
This fixes a deadlock that happens when /home is listed in /etc/fstab as
x-systemd.automount for an NFS directory.
If a unit file contains multiple CapabilityBoundingSet= or
AmbientCapabilities= lines, e.g.,
===
CapabilityBoundingSet=CAP_A CAP_B
CapabilityBoundingSet=~CAP_B CAP_C
===
before this commit, it results all capabilities except CAP_C are set to
CapabilityBoundingSet=, as each lines are always merged by OR.
This commit makes lines prefixed with ~ are merged by AND. So, for the
above example only CAP_A is set.
This makes easier to drop capabilities with drop-in config files.
systemctl would try to load the properties of the unit, which is impossible
for template names, and the whole operation would fail. It seems that this
regression was introduced in 00c83b4300.
Export the part of unit_find_paths() responsible for locating instance unit
fragments and reuse it from unit_exists() to fix the handling of template
units.
Fixes#6412.
On thinkpads there are two rfkill devices for bluetooth. The first is an
ACPI switch which powers down the USB dongle and the second one is the
USB dongle itself. So when userspace decides to enable rfkill on all
devices systemd would randomly save the soft block state of the USB
dongle. This later causes issue when re-enabling the devie as
systemd-rfkill would put the USB dongle into soft block state right
after the ACPI rfkill switch is unblocked by userspace.
The simple way to avoid this is to not store rfkill changes for devices
that disappear shortly after. That way only the "main" ACPI switch will
get stored and systemd-rfkill will not end up blocking the device right
after it is being added back again.
Let's clean up the checking for the various ExecOutput values a bit,
let's use IN_SET everywhere, and the same concepts for all three bools
we pass to dprintf().
913c1916 changed _ACTION_INVALID to negative, changing the enum to a
signed type. Take care to avoid comparing it with an unsigned type.
../src/systemctl/systemctl.c: In function ‘start_unit’:
../src/systemctl/systemctl.c:3107:35: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
assert(arg_action < ELEMENTSOF(action_table));
Now we don't support tunnels to be created without a .network file
that is we need a interface index.
This work allows tunnel to be created without a ifindex.
Closes#6695
The irreversible job mode is required to ensure that shutdown is not
interrupted by the activation of a unit with a conflict.
We already used the correct job mode for `ctrl-alt-del.target`. But not
for `exit.target` (SIGINT of user manager). The SIGRT shutdown signals
also needed fixing.
Also change SIGRTMIN+0 to isolate default.target, instead of starting
it. The previous behaviour was documented. However there was no reason
given for it, nor can we provide one. The problem that isolate is too
aggressive anywhere outside of emergency.target (#2607) is orthogonal.
This feature is "accessible by different means and only really a safety
net"; it is confusing for it to differ from `systemctl default` without
explanation.
`AllowIsolate=yes` is retained on poweroff.target etc. for backwards
compatibility.
`sigpwr.target` is also an obvious candidate for linking to a shutdown
target. Unforunately it is also a possible hook for implementing some
logic like system V init did, reading `/etc/powerstatus`. If we switched
to starting `sigpwr.target` with REPLACE_IRREVERSIBLY, attempts to run
`systemctl shutdown` from it would fail, if they had not thought to set
`DefaultDependencies=no`. We had provided no examples for `sigpwr`, and
the whole idea is cruft to keep legacy people happy. For the moment, I
leave `sigpwr` alone, with no risk of disrupting anyone's
previously-working, half-working, or untested setup.
Fixes#6484. See also #6471
The comment here was misleading: the job can fail to enqueue for reasons
other than the target not existing.
The fallback caused an error to be logged, and dates back to when the
"user" directory was named "session". units/session/exit.target was added
later the same year.
This is consistent with the documentation (man systemd), and the handling
of similar signals. It's also consistent with `systemctl exit`, which is
what most people would expect.
If true randomness is needed before udev is triggered, which would load
virtio_rng, reading /dev/random takes forever and the boot stalls for a
long time.
start_unit() is a little tangled. There's an easy part we can untangle,
then readers can concentrate on the more necessary complexity.
* Derive (method, action, mode) more clearly, as disjoint cases based on
the command. Don't rely on action_table[_ACTION_INVALID].target being
implicitly initialized to NULL.
verb_to_method() is now only used on one case, but not because I strongly
object to the implicit "StartUnit" cases. It's more a syntax problem.
I think the old code takes me longer to understand, because the call
comes just above a similar-looking call to verb_to_action(), but the
results of the two functions are used in different ways. It also helps
that the new code ends up having a more regular form, for the 4 different
cases.
These changes cost 6 extra lines.
* Add an assertion to confirm that we do not pass mode=NULL.
tmpfiles.d option "e" when run through systemd-tmpfiles --create should
apply configured permissions (uid,gid) only to already existing
files. When file doesn't exist we bail out with error. Instead we should
silently ignore non-existing files.
$ useradd test
$ cat /etc/tmpfiles.d/foobar.conf
e /tmp/test - test test 1d
$ ls -l /tmp/test
ls: cannot access '/tmp/test': No such file or directory
Before:
$ systemd-tmpfiles --create /etc/tmpfiles.d/foobar.conf
Adjusting owner and mode for /tmp/test failed: No such file or directory
$ echo $?
1
After:
$ systemd-tmpfiles --create /etc/tmpfiles.d/foobar.conf
$ echo $?
0
Prevent networkd from crashing when UseMTU is used. Many drivers will
bring the link down and then back up to configure a new MTU. Networkd
will also asynchonously send rtnl messages to configure the link and may
receive responses after the link has gone down and come back up (which
networkd will handle and set the lease and network to NULL.
This changes the behavior to instead return if this is the case instead
of crashing via assert.
ACTION_EMERGENCY and ACTION_DEFAULT would be handled correctly by
start_with_fallback(). However there is no fallback available for
them, and they would never be set in `arg_action` in the first
place. Remove the unused cases from the switch statement.
@poettering suggested this makes a good place to clarify the point,
explicitly listing all the `arg_action` values which would never be
set.
This prevents `systemctl` from runnning /bin/touch when the following
command is used:
```
systemctl -H '-oProxyCommand=/bin/touch i-shouldnt-be-here' show-environment
```
Other parts of the code do just use `table` as identifier for the actual
routing table id. This change should make it easier to read through the
code since the meaning or rather the name stays the same.
Previously there was only `VRF.TableId` which only supported numeric
identifiers for routing table. With the additiona of
`config_parse_route_table` also names can be used as identifiers.
This breaks things when the decrypted device is not immediately
`SYSTEMD_READY=1` (e. g. when a multi-device btrfs system is placed on
multiple cryptsetup devices).
Fixes#6537.
systemd-shutdown is run after the network is stopped,
so remounting a network filesystem read-only can hang.
A simple umount is the most useful thing that can
be done for a network filesystem once the network is down.
`systemctl default` uses job mode `isolate` (see `action_table`).
The job mode option is ignored.
Note that exiting the emergency shell service by using e.g.
`systemctl isolate multi-user` or `systemctl start multi-user.target`
already kills `emergency.service`. There's only a potential conflict
between your command and the command in systemd-sulogin-shell if you run
something like `systemctl start --no-block multi-user.target; exit`.
Which is nothing like what we told them to do :).
When a device is unplugged all device units sharing the same sysfs path
pointing to that device are supposed to be removed.
However it didn't work since while iterating the device unit list containing
all the relevant units, each unit was removed during each iteration of
LIST_FOREACH. However LIST_FOREACH doesn't support this use case and
LIST_FOREACH_SAFE must be use instead.
If a message is too large to fit into the output buffer, it will be
transmitted to the kernel in several chunks. However, the FDs must
only ever be transmitted once or they will bereceived by the remote
end repeatedly.
The D-Bus specification disallows several sets of FDs attached to
one message, however, the reference implementation of D-Bus will
not reject such a message, rather it will reassign the duplicate
FDs to subsequent FD-carrying messages.
This attaches the FD array only to the first byte of the message.
We have an embedded board with a couple of ethernet ports. From the kernel
log, I can see that the ethernet drivers are obtaining their correct MAC
address, but for some reason, at first systemd-networkd doesn't see the
mac address for the ethernet port at the time that it looks at
dhcp_client_identifier configuration (it has 00:00:00:00:00:00 for mac).
Later on, systemd-networkd gets a link_update() call, and at this time, it
has the correct mac address for the ethernet port. However, in link_update()
the dhcp_client_identifier configuration is not being considered, and a call
to sd_dhcp_client_set_iaid_duid() is being done always
NeilBrown
Yu Watanabe
iplayinsun
Zbigniew Jędrzejewski-Szmek
Benjamin Berg
Lennart Poettering
Alan Jenkins
Susant Sahani
Harald Hoyer
Michal Sekletar
Andreas Rammhold
Andrew Jeddeloh
Evgeny Vereshchagin
Topi Miettinen
Ivan Shapovalov
Franck Bui
Tom Gundersen
Jon Ringle
g0tar