A new option --security-policy= is added to work with the 'security' verb in order to enable
users to create and pass in a JSON file consisting of user defined requirements
against which to compare the specified unit file(s). These requirements then serve
as the measure of security threats for the file instead of the initial hard coded set of
requirements that the 'security' verb of systemd-analyze relied on.
Example Run:
A snapshot of the user defined testfile.json file is shown below instead of the complete file
for readability purposes.
{
"PrivateDevices":
{"description_good": "Service has no access to hardware devices",
"description_bad": "Service potentially has access to hardware devices",
"weight": 1000,
"range": 1
},
"PrivateMounts":
{"description_good": "Service cannot install system mounts",
"description_bad": "Service may install system mounts",
"weight": 1000,
"range": 1
},
"PrivateNetwork":
{"description_good": "Service has no access to the host's network",
"description_bad": "Service has access to the host's network",
"weight": 2500,
"range": 1
},
"PrivateTmp":
{"description_good": "Service has no access to other software's temporary files",
"description_bad": "Service has access to other software's temporary files",
"weight": 1000,
"range": 1
},
"PrivateUsers":
{"description_good": "Service does not have access to other users",
"description_bad": "Service has access to other users",
"weight": 1000,
"range": 1
}
}
1. I created the jsontest.service file in order to test the --security-policy= option as follows:
maanya-goenka@debian:~/systemd (custom-security)$ cat<<EOF>jsontest.service
> [Service]
> ExecStart = echo hello
> PrivateNetwork = yes
> PrivateDevices = yes
> PrivateMounts = yes
> EOF
The security analysis table outputted below has been truncated to include only the first few lines for readability.
maanya-goenka@debian:~/systemd (custom-security)$ sudo build/systemd-analyze security --root= --offline=true
--security-policy=src/analyze/testfile.json jsontest.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION
✓ PrivateNetwork Service has no access to the host's network
✗ UserOrDynamicUser Service runs as root user
✗ CapabilityBoundingSet_CAP_SET_UID_GID_PCAP Service may change UID/GID identities/capabilities
✓ PrivateMounts Service cannot install system mounts
✓ PrivateDevices Service has no access to hardware devices
→ Overall exposure level for jsontest.service: 8.3 EXPOSED 🙁
maanya-goenka@debian:~/systemd (custom-security)$ echo $? 0
2. In order to ensure that the JSON data was actually being correctly parsed, I made some changes to the JSON
file, specifically to the id "PrivateNetwork" as follows:
Before:
--------
"PrivateNetwork":
{"description_good": "Service has no access to the host's network",
"description_bad": "Service has access to the host's network",
"weight": 2500,
"range": 1
}
After:
--------
"PrivateNetwork":
{"description_good": "Service runs without access to host network",
"description_bad": "Service has access to the host's network",
"weight": 6000,
"range": 1
}
As expected, the new description for the description_good field of the Private Network id was updated in
the analysis table outputted below and the overall exposure level of the unit file decreased because
the weight assigned to 'Private Network' (which is set to yes) increased from 2500 to 6000.
maanya-goenka@debian:~/systemd (custom-security)$ sudo build/systemd-analyze security --root= --offline=true
--security-policy=src/analyze/testfile.json jsontest.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION
✓ PrivateNetwork Service runs without access to the host's network
✗ UserOrDynamicUser Service runs as root user
✗ CapabilityBoundingSet_CAP_SET_UID_GID_PCAP Service may change UID/GID identities/capabilities
✓ PrivateMounts Service cannot install system mounts
✓ PrivateDevices Service has no access to hardware devices
→ Overall exposure level for jsontest.service: 7.8 EXPOSED 🙁
maanya-goenka@debian:~/systemd (custom-security)$ echo $? 0
3. When paired with security's --threshold= option, systemd-analyze exits with a non-zero error status indicating
that the overall exposure level for the unit file (=78) is greater than the set threshold (=70). The same
jsontest.service file is used for the demo run below:
maanya-goenka@debian:~/systemd (custom-security)$ sudo build/systemd-analyze security --root= --offline=true
--security-policy=src/analyze/testfile.json --threshold=70 jsontest.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION
✓ PrivateNetwork Service runs without access to host network
✗ UserOrDynamicUser Service runs as root user
✗ CapabilityBoundingSet_CAP_SET_UID_GID_PCAP Service may change UID/GID identities/capabilities
✓ PrivateMounts Service cannot install system mounts
✓ PrivateDevices Service has no access to hardware devices
→ Overall exposure level for jsontest.service: 7.8 EXPOSED 🙁
maanya-goenka@debian:~/systemd (custom-security)$ echo $? 1
new option
--threshold option added to work with security verb and with the --offline option so that
users can determine what qualifies as a security threat. The threshold set by the user is
compared with the overall exposure level assigned to a unit file and if the exposure is
higher than the threshold, 'security' will return a non-zero exit status. The default value
of the --threshold option is 100.
Example Run:
1. testcase.service is a unit file created for testing the --threshold option
maanya-goenka@debian:~/systemd (systemd-security)$ cat<<EOF>testcase.service
> [Service]
> ExecStart = echo hello
> EOF
For the purposes of this demo, the security table outputted below has been cut to show only the first two security settings.
maanya-goenka@debian:~/systemd (systemd-security)$ sudo build/systemd-analyze security --offline=true testcase.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION EXPOSURE
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ User=/DynamicUser= Service runs as root user 0.4
→ Overall exposure level for testcase.service: 9.6 UNSAFE 😨
maanya-goenka@debian:~/systemd (systemd-security)$ echo $? 0
2. Next, we use the same testcase.service file but add an additional --threshold=60 parameter. We would expect 'security' to exit
with a non-zero status because the overall exposure level (= 96) is higher than the set threshold (= 60).
maanya-goenka@debian:~/systemd (systemd-security)$ sudo build/systemd-analyze security --offline=true --threshold=60 testcase.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION EXPOSURE
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ User=/DynamicUser= Service runs as root user 0.4
→ Overall exposure level for testcase.service: 9.6 UNSAFE 😨
maanya-goenka@debian:~/systemd (systemd-security)$ echo $? 1
New option --offline which works with the 'security' command and takes in a boolean value. When set to true,
it performs an offline security review of the specified unit file(s). It does not rely on PID 1 to acquire
security information for the files like 'security' when used by itself does. It makes use of the refactored
security_info struct instead (commit #8cd669d3d3cf1b5e8667acc46ba290a9e8a8e529). This means that --offline can be
used with --image and --root as well. When used with --threshold, if a unit's overall exposure level is above
that set by the user, the default value being 100, --offline returns a non-zero exit status.
Example Run:
1. testcase.service is a unit file created for testing the --offline option
maanya-goenka@debian:~/systemd (systemd-security)$ cat<<EOF>testcase.service
> [Service]
> ExecStart = echo hello
> EOF
For the purposes of this demo, the security table outputted below has been cut to show only the first two security settings.
maanya-goenka@debian:~/systemd (systemd-security)$ sudo build/systemd-analyze security --offline=true testcase.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION EXPOSURE
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ User=/DynamicUser= Service runs as root user 0.4
→ Overall exposure level for testcase.service: 9.6 UNSAFE 😨
maanya-goenka@debian:~/systemd (systemd-security)$ echo $? 0
2. The testcase.service unit file is modified to set PrivateNetwork to "yes". This reduces the exposure level from 9.6 to 9.1.
maanya-goenka@debian:~/systemd (systemd-security)$ nano testcase.service
> [Service]
> ExecStart = echo hello
> PrivateNetwork = yes
> EOF
maanya-goenka@debian:~/systemd (systemd-security)$ sudo build/systemd-analyze security --offline=true testcase.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION EXPOSURE
✓ PrivateNetwork= Service has access to the host's network
✗ User=/DynamicUser= Service runs as root user 0.4
→ Overall exposure level for testcase.service: 9.1 UNSAFE 😨
maanya-goenka@debian:~/systemd (systemd-security)$ echo $? 0
3. Next, we use the same testcase.service unit file but add the additional --threshold=60 option to see how --threshold works with
--offline. Since the overall exposure level is 91 which is greater than the threshold value set by the user (= 60), we can expect
a non-zero exit status.
maanya-goenka@debian:~/systemd (systemd-security)$ sudo build/systemd-analyze security --offline=true --threshold=60 testcase.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's
process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'.
Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your
unit file, and consider removing the setting altogether.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
NAME DESCRIPTION EXPOSURE
✓ PrivateNetwork= Service has access to the host's network
✗ User=/DynamicUser= Service runs as root user 0.4
→ Overall exposure level for testcase.service: 9.1 UNSAFE 😨
maanya-goenka@debian:~/systemd (systemd-security)$ echo $? 1
The commit introduces a callback invoked from log_syntax_internal.
Use it from systemd-analyze to gather a list of units that contain
syntax warnings. A new command line option is added to make use of this.
The new option --recursive-errors takes in three possible modes:
1. yes - which is the default. systemd-analyze exits with an error when syntax warnings arise during verification of the
specified units or any of their dependencies.
3. no - systemd-analyze exits with an error when syntax warnings arise during verification of only the selected unit.
Analyzing and loading any dependencies will be skipped.
4. one - systemd-analyze exits with an error when syntax warnings arise during verification
of only the selected units and their direct dependencies.
Below are two service unit files that I created for the purposes of testing:
1. First, we run the commands on a unit that does not have dependencies but has a non-existing key-value setting (i.e. foo = bar).
> cat <<EOF>testcase.service
[Unit]
foo = bar
[Service]
ExecStart = echo hello
EOF
OUTPUT:
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=yes testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=no testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=one testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
2. Next, we run the commands on a unit that is syntactically valid but has a non-existing dependency (i.e. foo2.service)
> cat <<EOF>foobar.service
[Unit]
Requires = foo2.service
[Service]
ExecStart = echo hello
EOF
OUTPUT:
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify foobar.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
foobar.service: Failed to create foobar.service/start: Unit foo2.service not found.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=yes foobar.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
foobar.service: Failed to create foobar.service/start: Unit foo2.service not found.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=no foobar.service
maanya-goenka@debian:~/systemd (log-error)$ echo $?
0
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=one foobar.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
foobar.service: Failed to create foobar.service/start: Unit foo2.service not found.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
Adding --image parameter for verify verb using the dissect image functionality
-----------------------------------------------------------------------------------
Example Run:
I created a unit service file testrun.service with an invalid key-value pairing
(foo = bar) and a squashfs image run.raw to test the code.
maanya-goenka@debian:~/systemd (img-support)$ cat <<EOF>img/usr/lib/systemd/system/testrun.service
> [Unit]
> foo = bar
>
> [Service]
> ExecStart = /opt/script0.sh
> EOF
maanya-goenka@debian:~/systemd (img-support)$ mksquashfs img/ run.raw
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on run.raw, block size 131072.
[==============================================================================================================================|] 6/6 100%
Exportable Squashfs 4.0 filesystem, gzip compressed, data block size 131072
compressed data, compressed metadata, compressed fragments, compressed xattrs
duplicates are removed
Filesystem size 0.60 Kbytes (0.00 Mbytes)
52.32% of uncompressed filesystem size (1.14 Kbytes)
Inode table size 166 bytes (0.16 Kbytes)
43.01% of uncompressed inode table size (386 bytes)
Directory table size 153 bytes (0.15 Kbytes)
58.40% of uncompressed directory table size (262 bytes)
Number of duplicate files found 1
Number of inodes 12
Number of files 6
Number of fragments 1
Number of symbolic links 0
Number of device nodes 0
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 6
Number of ids (unique uids + gids) 1
Number of uids 1
maanya-goenka (1000)
Number of gids 1
maanya-goenka (1000)
maanya-goenka@debian:~/systemd (img-support)$ sudo build/systemd-analyze verify --image=run.raw testrun.service
/tmp/.#systemd-analyzec71c7297a936b91c/usr/lib/systemd/system/testrun.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
testrun.service: Failed to create testrun.service/start: Unit sysinit.target not found.
The 'Unit sysinit.target not found' error that we see here is due to recursive dependency searching during
unit loading and has been addressed in a different PR:
systemd-analyze: add option to return an error value when unit verification fails #20233
-------------------------------------------------------------------------------
Example Run:
foobar.service created below is a service unit file that has a non-existing key-value
pairing (foo = bar) and is thus, syntactically invalid.
maanya-goenka@debian:~/systemd (img-support)$ cat <<EOF>img/usr/lib/systemd/system/foobar.service
> [Unit]
> foo = bar
>
> [Service]
> ExecStart = /opt/script0.sh
> EOF
The failure to create foobar.service because of the recursive dependency searching and verification has been addressed
in a different PR: systemd-analyze: add option to return an error value when unit verification fails #20233
maanya-goenka@debian:~/systemd (img-support)$ sudo build/systemd-analyze verify --root=img/ foobar.service
/home/maanya-goenka/systemd/img/usr/lib/systemd/system/foobar.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
foobar.service: Failed to create foobar.service/start: Unit sysinit.target not found.
waitid(2) and the libc function signature calls this "exit status", and
uses "exit code" for something different. Let's stick to the same
nomenclature hence.
We had 'calendar' and 'timespan', but the third one was missing.
Also consistently order the verbs as calendar/timestamp/timespan in help.
The output from 'timespan' is highlighted more.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1711065.
The number of verbs supported by systemd-analyze has grown quite a bit, and the
man page has become an unreadable wall of text. Let's put each verb in a
separate subsection, grouping similar verbs together, and add a lot of examples
to guide the user.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
This is useful for a couple of cases, I'm mostly interested in case #1:
1. Verifying "reasonable" values in a trivially scriptable way
2. Debugging unexpected time span parsing directly
Test Plan:
```
% build/systemd-analyze timespan 20
Original: 20
μs: 20
Human: 20us
% build/systemd-analyze timespan 20ms
Original: 20ms
μs: 20000
Human: 20ms
% build/systemd-analyze timespan 20z
Failed to parse time span '20z': Invalid argument
```
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
New debug verb that enables or disables the service runtime watchdogs
and emergency actions during runtime. This is the systemd-analyze
version of the systemd.service_watchdogs command line option.
This little new command can parse, validate, normalize calendar events,
and calculate when they will elapse next. This should be useful for
anyone writing calendar events and who'd like to validate the expression
before running them as timer units.
They’re counterparts to the existing set-log-level and set-log-target
verbs, simply printing the current value to stdout. This makes it
slightly easier to temporarily change the log level and/or target and
then restore the old value(s).
