So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
We currently use the ownership of the top-level directory as a hint
whether we need to descent into the whole tree to chown() it recursively
or not. This is problematic with the previous chown()ing algorithm, as
when descending into the tree we'd first chown() and then descend
further down, which meant that the top-level directory would be chowned
first, and an aborted recursive chowning would appear on the next
invocation as successful, even though it was not. Let's reshuffle things
a bit, to make the re-chown()ing safe regarding interruptions:
a) We chown() the dir we are looking at last, and descent into all its
children first. That way we know that if the top-level dir is
properly owned everything inside of it is properly owned too.
b) Before starting a chown()ing operation, we mark the top-level
directory as owned by a special "busy" UID range, which we can use to
recognize whether a tree was fully chowned: if it is marked as busy,
it's definitely not fully chowned, as the busy ownership will only be
fixed as final step of the chowning.
Fixes: #6292
This adds some simply detection logic for cases where dissection is
invoked on an externally created loop device, and partitions have been
detected on it, but partition scanning so far was off. If this is
detected we now print a brief message indicating what the issue is,
instead of failing with a useless EINVAL message the kernel passed to
us.
This adds some basic discovery of block device images for nspawn and
friends. Note that this doesn't add searching for block devices using
udev, but instead expects users to symlink relevant block devices into
/var/lib/machines. Discovery is hence done exactly like for
dir/subvol/raw file images, except that what is found may be a (symlink
to) a block device.
For now, we do not support cloning these images, but removal, renaming
and read-only flags are supported to the point where that makes sense.
Fixe: #6990
This fixes --read-only with --private-users. mkdir_userns_p may return
-EROFS if either mkdir or lchown fails; lchown failing is fine as the
mount point will just be overmounted, and if mkdir fails then the
following mount() will also fail (with ENOENT).
The current code shifting an integer 1 failed for capabilities like
CAP_MAC_ADMIN (numerical value 33). This caused issues when specifying
them in the nspawn configuration file. Using an uint64_t 1 instead.
The similar code for processing the --capability command line option
was already correctly working.
Also, move prlimit64() out of @resources.
prlimit64() may be used both for getting and setting resource limits, and
is implicitly called by glibc at various places, on some archs, the same
was as getrlimit(). SImilar, igetrlimit() is an arch-specific
replacement for getrlimit(), and hence should be whitelisted at the same
place as getrlimit() and prlimit64().
Also see: https://lists.freedesktop.org/archives/systemd-devel/2017-September/039543.html
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
This removes the '@credentials' syscall set that was added in commit
v234-468-gcd0ddf6f75.
Most of these syscalls are so simple that we do not want to filter them.
They work on the current calling process, doing only read operations,
they do not have a deep kernel path.
The problem may only be in 'capget' syscall since it can query arbitrary
processes, and used to discover processes, however sending signal 0 to
arbitrary processes can be used to discover if a process exists or not.
It is unfortunate that Linux allows to query processes of different
users. Lets put it now in '@process' syscall set, and later we may add
it to a new '@basic-process' set that allows most basic process
operations.
keyring material should not leak into the container. So far we relied on
seccomp to deny access to the keyring, but given that we now made the
seccomp configurable, and access to keyctl() and friends may optionally
be permitted to containers now let's make sure we disconnect the callers
keyring from the keyring of PID 1 in the container.
Let's lock things down a bit, and maintain a list of what's permitted
rather than a list of what's prohibited in nspawn (also to make things a
bit more like Docker and friends).
Note that this slightly alters the effect of --system-call-filter=, as
now the negative list now takes precedence over the positive list.
However, given that the option is just a few days old and not included
in any released version it should be fine to change it at this point in
time.
Note that the whitelist is good chunk more restrictive thatn the
previous blacklist. Specifically:
- fanotify is not permitted (given the buffer size issues it's
problematic in containers)
- nfsservctl is not permitted (NFS server support is not virtualized)
- pkey_xyz stuff is not permitted (really new stuff I don't grok)
- @cpu-emulation is prohibited (untested legacy stuff mostly, and if
people really want to run dosemu in nspawn, they should use
--system-call-filter=@cpu-emulation and all should be good)
Now that we have ported nspawn's seccomp code to the generic code in
seccomp-util, let's extend it to support whitelisting and blacklisting
of specific additional syscalls.
This uses similar syntax as PID1's support for system call filtering,
but in contrast to that always implements a blacklist (and not a
whitelist), as we prepopulate the filter with a blacklist, and the
unit's system call filter logic does not come with anything
prepopulated.
(Later on we might actually want to invert the logic here, and
whitelist rather than blacklist things, but at this point let's not do
that. In case we switch this over later, the syscall add/remove logic of
this commit should be compatible conceptually.)
Fixes: #5163
Replaces: #5944
glibc appears to propagate different errors in different ways, let's fix
this up, so that our own code doesn't get confused by this.
See #6752 + #6737 for details.
Fixes: #6755
Given that we set NOTIFY_SOCKET unconditionally it's not surprising that
processes way down the process tree think it's smart to send us a
notification message.
It's still useful to keep this message, for debugging things, but it
shouldn't be generated by default.
Previously, only when --register=yes was set (the default) the invoked
container would get its own scope, created by machined on behalf of
nspawn. With this change if --register=no is set nspawn will still get
its own scope (which is a good thing, so that --slice= and --property=
take effect), but this is not done through machined but by registering a
scope unit directly in PID 1.
Summary:
--register=yes → allocate a new scope through machined (the default)
--register=yes --keep-unit → use the unit we are already running in an register with machined
--register=no → allocate a new scope directly, but no machined
--register=no --keep-unit → do not allocate nor register anything
Fixes: #5823
This code already existed in some form, however commented. Remove the
comments, as this was most likely simply a forgotten commenting for
debugging purposes.
This also extends the logic a bit, by sending SIGHUP right after the
SIGTERM, so that shells will also terminate, when PID 1 gets a
SIGRTMIN+3.
Fixes: #5711
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
Tests can be run with 'ninja-build test' or using 'mesontest'.
'-Dtests=unsafe' can be used to include the "unsafe" tests in the
test suite, same as with autotools.
v2:
- use more conf.get guards are optional components
- declare deps on generated headers for test-{af,arphrd,cap}-list
v3:
- define environment for tests
Most test don't need this, but to be consistent with autotools-based build, and
to avoid questions which tests need it and which don't, set the same environment
for all tests.
v4:
- rework test generation
Use a list of lists to define each test. This way we can reduce the
boilerplate somewhat, although the test listings are still pretty verbose. We
can also move the definitions of the tests to the subdirs. Unfortunately some
subdirs are included earlier than some of the libraries that test binaries
are linked to. So just dump all definitions of all tests that cannot be
defined earlier into src/test. The `executable` definitions are still at the
top level, so the binaries are compiled into the build root.
v5:
- tag test-dnssec-complex as manual
v6:
- fix HAVE_LIBZ typo
- add missing libgobject/libgio defs
- mark test-qcow2 as manual
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
When using pkg-config to determine the include flags for blkid the
flags are returned as:
$ pkg-config blkid --cflags
-I/usr/include/blkid -I/usr/include/uuid
We use the <blkid/blkid.h> include which would be correct when using
the default compiler /usr/include header search path. However, when
cross-compiling the blkid.h will not be installed at /usr/include and
highly likely in a temporary system root. It is futher compounded if
the cross-compile packages are split up and the blkid package is not
available in the same sysroot as the compiler.
Regardless of the compilation setup, the correct include path should be
<blkid.h> if using the pkg-config returned CFLAGS.
We use our cgroup APIs in various contexts, including from our libraries
sd-login, sd-bus. As we don#t control those environments we can't rely
that the unified cgroup setup logic succeeds, and hence really shouldn't
assert on it.
This more or less reverts 415fc41cea.
Zbigniew Jędrzejewski-Szmek
Lennart Poettering
Lauri Tirkkonen
myrkr
Alan Jenkins
Yu Watanabe
Djalal Harouni
Andreas Rammhold
tomty89
Matija Skala
Matt Clarkson
David Michael
AsciiWolf