struct timex is defined by sys/timex.h -> bits/timex.h.
Glibc includes the header in time.h, but let's explicitly include it
when the struct is used.
Similar to 4f18ff2e29, but for sys/timex.h.
We use symbols provided by unistd.h without including it. E.g.
open(), close(), read(), write(), access(), symlink(), unlink(), rmdir(),
fsync(), syncfs(), lseek(), ftruncate(), fchown(), dup2(), pipe2(),
getuid(), getgid(), gettid(), getppid(), pipe2(), execv(), _exit(),
environ, STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO, F_OK, and their
friends and variants, so on.
Currently, unistd.h is indirectly included mainly in the following two paths:
- through missing_syscall.h, which is planned to covert to .c file.
- through signal.h -> bits/sigstksz.h, which is new since glibc-2.34.
Note, signal.h is included by sd-eevent.h. So, many source files
indirectly include unistd.h if newer glibc is used.
Currently, our baseline on glibc is 2.31. We need to support glibc older
than 2.34, but unfortunately, we do not have any CI environments with
such old glibc. CIFuzz uses glibc-2.31, but it builds only fuzzers, and
many files are even not compiled.
[1] says:
> Since 0.60.0 the name argument is optional and defaults to the basename of
> the first output
We specify >= 0.62 as the supported version, so drop the duplicate name in all cases
where it is the same as outputs[0], i.e. almost all cases.
[1] https://mesonbuild.com/Reference-manual_functions.html#custom_target
Also, let's deflatten the lists of sources in preparation for the
next commit at the same time.
In systemctl, we split out systemctl-main.c to make sure the definition
of main() is in a separate object which allows us to extract the systemctl.c
object and link it in the fuzzer target without getting a multiple definition
error when linking.
Currently, when we want to add unit tests for code that is compiled into
an executable, we either compile the code at least twice (once for the
executable, and once for each test that uses it) or we create a static
library which is then used by both the executable and all the tests.
Both of these options are not ideal, compiling source files more than
once slows down the build for no reason and creating the intermediate
static libraries takes a lot of boilerplate.
Instead, let's use the extract_objects() method that meson exposes on
build targets. This allows us to extract the objects corresponding to
specific source files and use them in other executables. Because we
define all executables upfront into a dictionary, we integrate this into
the dictionary approach by adding two new fields:
- 'extract' takes a list of files for which objects should be extracted.
The extracted objects are stored in a dict keyed by the executable name
from which they were extracted.
- 'objects' takes the name of an executable from which the extracted
objects should be added to the current executable.
One side effect of this approach is that we can't build test executables
anymore without building the main executable, so we stop building test
executables unless we're also building the main executable. This allows
us to switch to using subdir_done() in all of these subdirectories to skip
parsing them if the corresponding component is disabled.
These changes get me down from 2439 => 2403 ninja targets on a full rebuild
from scratch.
Let's move some logic from _DEFINE_MAIN_FUNCTION() and other places
in main-func.h into functions that we implement in main-func.c to
allow moving some included headers from the header to the .c file.
Currently, NOTIFY_READY from daemon-util.h conflicts with NOTIFY_READY
from NotifyState from service.h so let's rename the constants to avoid
the conflict.
meson's target has a few issues:
- Runs on all source files regardless if they're included in the
build or not
- Doesn't have any dependencies on generated sources which means we
have to do a full build first before we can run clang-tidy
- Doesn't allow us to pass any extra arguments
To work around these, let's define our own clang-tidy target instead
using llvm's run-clang-tidy script. Alongside the clang-tidy target,
let's start keeping track of all generated sources which we make the
clang-tidy target depend on. We also add a new target which will only
generate source files which is useful for setting up the source tree
for running code analysis against it.
Now that the necessary functions from log.h have been moved to macro.h,
we can stop including log.h in macro.h. This requires modifying source
files all over the tree to include log.h instead.
This introduce LOG_ITEM() macro that checks arbitrary formats in
log_struct().
Then, drop _printf_ attribute from log_struct_internal(), as it does not
help so much, and compiler checked only the first format string.
Hopefully, this silences false-positive warnings by Coverity.
This tries to get rid of most manual sigprocmask() changes, in favour
of:
1. The SD_EVENT_SIGNAL_PROCMASK flag to sd_event_add_signal()
2. The sd_event_set_signal_exit() call for handling SIGTERM/SIGINT
3. Move masking of SIGWINCH into ptyfwd, out of nspawn/vmspawn/run
And while we are at it get rid of a bunch of event source fields whose
lifetime is bound to the sd_event object they belong to anyway, and make
use of the "floating" event source feature of sd-event instead.
Requested in https://github.com/systemd/systemd/pull/33214#discussion_r1630251308.
Also, reword error messages a bit. When /usr/lib/clock-epoch was introduced,
"build time" stopped being acurate. Just say "epoch" instead.
The same message ID is used in the manager and timesyncd. The event is
essentially equivalent for the user, and it seems reasonable that to search for
both at the same time.
The catalog entry is dropped. It provided almost no additional information above
the message. When the same message ID is now applied to messages from PID1 and
timesyncd, and the clock can be both advanced and rewound, it becomes very hard
to make the catalog entry provide something useful, because catalog entries don't
allow conditionalization.
We would attempt to take the built-in epoch twice. Since
advance_tstamp() is only called from one place, we don't need to do that.
Also, just pass usec_t instead of a pointer to stat buf.
Don't say we set the clock to "recorded timestamp" if we just set it
to the built-in epoch. Also, consistently say "advance" to make it clear
that we'll not attempt to rewind the clock here.
No functional change yet, just moving stuff around and message format
adjustments.
EPOCH_CLOCK_FILE is also made public for consistency, even though I don't
plan to use it outside of the one location.
gcrypt is used only for journal sealing operations in libsystemd, so it
can be made into a dlopen dependency that is used only on demand. This
allows to reduce the footprint of libsystemd in the most common cases.
Keep systemd-pull and systemd-resolved with normal linking, as they are
executables, and usually built with OpenSSL support anyway.
This means the main config file is loaded also from /run and /usr.
We should load the main config file from all the places where we load drop-ins.
I realize I had a giant blind spot: I always assumed that we load config files
from /etc, /run, /usr/local/lib, /usr/lib. But it turns out that we only used
those paths for drop-ins. For the main config file, we only looked in /etc. The
docs actually partially described this behaviour, i.e. most SYNOPSIS sections
and some parts of the text, but not others.
This is strange, because 6495361c7d was completely
bogus with the behaviour before this patch. We had a huge discussion before it
was merged, and clearly nobody noticed this. Similarly, in the previous version
of the current pull request, we had a long discussion about the appropriate
order of directories, and apparently nobody noticed that there was no order,
because only looked in one directory. So the blind spot seems to have been
shared.
Also, systemd-analyze cat-config behaved incorrectly, i.e. its behaviour matches
the new behaviour.
Possibly, in the future it'll make it easier to add support for --root.
This essentially reverts 5656cdfeea. I find it
much easier to understand what is going on when the
path-relative-to-the-search-path is passed in full, instead of being constructed
from two parts, with one of the parts being implicit in some places.
Also, we call 'systemd-analyze cat-config <path>' with <path> with the same
meaning, so this makes the internal and external APIs more consistent.
Because of alignment, those bitfields were not doing anything useful,
and were causing the generated code to be more complicated. But in this
case, at least potentially there might be a number of copies of those
structs (if we have a bunch of time servers configured), so let's actually
implement the intended space savings by reording the fields to reduce the
size of holes.
Deprecated IPTOS_LOWDELAY is ignored by most of today's
network equipment that only ever care about DSCP.
Use the DSCP found in other NTP implementations and set the appropiate
TCLASS for IPv6.
This simplifies bus_verify_polkit_async() and related calls quite a bit:
1. This removes any support for authentication-by-Linux-capability. This
is ultimately a kdbus leftover: with classic AF_UNIX transports we
cannot authenticate by capabilities securely (because we cannot
acquire it from the peer without races), hence we never actually did.
Since the necessary kernel work didn't materialize in the last 10y,
and is unlikely to be added, let's just kill this context. We cannot
quite remove the caps stuff from sd-bus for API compat, but for our
polkit logic let's kill it.
2. The "good_uid" and "interactive" params are only necessary in very
few cases, hence let's move them to a new call
bus_verify_polkit_async_full() and make bus_verify_polkit_async() a
wrapper around it without those two parameters.
This also fixes a bunch of wrong uses of the "interactive" bool. The
bool makes no sense today as the ALLOW_INTERACTIVE_AUTHORIZATION field
in the D-Bus message header replaces it fully. We only need it to
implement method calls we introduced prior to that header field becoming
available in D-Bus. And it should only be used on such old method calls,
and otherwise always be set to false.
This does not change behaviour in any way. Just simplifies stuff.
Fixes: #21586
Those functions take a pointer to a timestamp and return a timestamp pointer,
so the reader would be justified to think that those are just getters. Rename
them to avoid confusion.
As in their current form they didn't work at all:
systemd-timesyncd[190115]: Assertion 's' failed at src/libsystemd/sd-event/sd-event.c:3058, function sd_event_source_set_enabled(). Ignoring.
systemd-timesyncd[190115]: Failed to reenable system ntp server change event source!
systemd-timesyncd[190115]: Failed to enable ntp server defer event, ignoring: Invalid argument
This was also pointed out in the post-merge review [0].
Let's address this together with the rest of the comments, and add
some tests to make sure everything works as it should.
Resolves: #28770
Follow-up to: 8f1c446
[0] https://github.com/systemd/systemd/commit/8f1c4469793f2f0281fdfbc20ba4085e20cdd16f#r124147466
This allows distros to install configuration file templates in /usr/lib/systemd
for example.
Currently we install "empty" config files in /etc/systemd/. They serve two
purposes:
- The file contains commented-out values that show the default settings.
- It is easier to edit the right file if it is already there, the user doesn't
have to type in the path correctly, and the basic file structure is already in
place so it's easier to edit.
Things that have happened since this approach was put in place:
- We started supporting drop-ins for config files, and drop-ins are the
recommended way to create local configuration overrides.
- We have systemd-analyze cat-config which takes care of iterating over
all possible locations (/etc, /run, /usr, /usr/local) and figuring out
the right file.
- Because of the first two points, systemd-analyze cat-config is much better,
because it takes care of finding all the drop-ins and figuring out the
precedence. Looking at files manually is still possible of course, but not
very convenient.
The disadvantages of the current approach with "empty" files in /etc:
- We clutter up /etc so it's harder to see what the local configuration actually is.
- If a user edits the file, package updates will not override the file (e.g.
systemd.rpm uses %config(noreplace). This means that the "documented defaults"
will become stale over time, if the user ever edits the main config file.
Thus, I think that it's reasonable to:
- Install the main config file to /usr/lib so that it serves as reference for
syntax and option names and default values and is properly updated on package
upgrades.
- Recommend to users to always use drop-ins for configuration and
systemd-analyze cat-config to view the documentation.
This setting makes this change opt-in.
Fixes#18420.
[zjs: add more text to the description]
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Jelle van der Waa
Daan De Meyer
Mike Yuan
Integral
Lennart Poettering
Luca Boccassi
David Venhoek
Cristian Rodríguez
Frantisek Sumsal
Franck Bui
Kingbom Dou