quectel: Check SIM swap after "+QUSIM: 1" URC

Quectel emits "+QUSIM: 1" after eUICC reinitialization. Detect it
and perform SIM swap check if one is encountered.

The motivation here is that M2M eUICC profile switch causes eUICC
reset and this is one way to detect and handle profile switches
properly on Quectel modems. The existing SIM hot swap mechanism is
used as it appears to be suitable for handling profile switches as
well as physical swapping of SIM cards.
This commit is contained in:
Teijo Kinnunen
2020-04-17 07:45:47 +00:00
committed by Aleksander Morgado
parent 1802bd07ac
commit d98597e430
4 changed files with 113 additions and 0 deletions
@@ -19,10 +19,12 @@
#include "mm-shared-quectel.h"
#include "mm-iface-modem-firmware.h"
static void iface_modem_init (MMIfaceModem *iface);
static void shared_quectel_init (MMSharedQuectel *iface);
static void iface_modem_firmware_init (MMIfaceModemFirmware *iface);
G_DEFINE_TYPE_EXTENDED (MMBroadbandModemQmiQuectel, mm_broadband_modem_qmi_quectel, MM_TYPE_BROADBAND_MODEM_QMI, 0,
G_IMPLEMENT_INTERFACE (MM_TYPE_IFACE_MODEM, iface_modem_init)
G_IMPLEMENT_INTERFACE (MM_TYPE_IFACE_MODEM_FIRMWARE, iface_modem_firmware_init)
G_IMPLEMENT_INTERFACE (MM_TYPE_SHARED_QUECTEL, shared_quectel_init))
@@ -49,6 +51,13 @@ mm_broadband_modem_qmi_quectel_init (MMBroadbandModemQmiQuectel *self)
{
}
static void
iface_modem_init (MMIfaceModem *iface)
{
iface->setup_sim_hot_swap = mm_shared_quectel_setup_sim_hot_swap;
iface->setup_sim_hot_swap_finish = mm_shared_quectel_setup_sim_hot_swap_finish;
}
static void
iface_modem_firmware_init (MMIfaceModemFirmware *iface)
{
@@ -19,10 +19,12 @@
#include "mm-shared-quectel.h"
#include "mm-iface-modem-firmware.h"
static void iface_modem_init (MMIfaceModem *iface);
static void shared_quectel_init (MMSharedQuectel *iface);
static void iface_modem_firmware_init (MMIfaceModemFirmware *iface);
G_DEFINE_TYPE_EXTENDED (MMBroadbandModemQuectel, mm_broadband_modem_quectel, MM_TYPE_BROADBAND_MODEM, 0,
G_IMPLEMENT_INTERFACE (MM_TYPE_IFACE_MODEM, iface_modem_init)
G_IMPLEMENT_INTERFACE (MM_TYPE_IFACE_MODEM_FIRMWARE, iface_modem_firmware_init)
G_IMPLEMENT_INTERFACE (MM_TYPE_SHARED_QUECTEL, shared_quectel_init))
@@ -56,6 +58,13 @@ mm_broadband_modem_quectel_init (MMBroadbandModemQuectel *self)
{
}
static void
iface_modem_init (MMIfaceModem *iface)
{
iface->setup_sim_hot_swap = mm_shared_quectel_setup_sim_hot_swap;
iface->setup_sim_hot_swap_finish = mm_shared_quectel_setup_sim_hot_swap_finish;
}
static void
shared_quectel_init (MMSharedQuectel *iface)
{
+89
View File
@@ -21,6 +21,7 @@
#define _LIBMM_INSIDE_MM
#include <libmm-glib.h>
#include "mm-log-object.h"
#include "mm-iface-modem-firmware.h"
#include "mm-base-modem.h"
#include "mm-base-modem-at.h"
@@ -71,6 +72,94 @@ mm_shared_quectel_firmware_load_update_settings (MMIfaceModemFirmware *self,
task);
}
/*****************************************************************************/
/* "+QUSIM: 1" URC is emitted by Quectel modems after the USIM has been
* (re)initialized. We register a handler for this URC and perform a check
* for SIM swap when it is encountered. The motivation for this is to detect
* M2M eUICC profile switches. According to SGP.02 chapter 3.2.1, the eUICC
* shall trigger a REFRESH operation with eUICC reset when a new profile is
* enabled. The +QUSIM URC appears after the eUICC has restarted and can act
* as a trigger for profile switch check. This should basically be handled
* the same as a physical SIM swap, so the existing SIM hot swap mechanism
* is used.
*/
static void
quectel_qusim_check_for_sim_swap_ready (MMIfaceModem *self,
GAsyncResult *res)
{
GError *error = NULL;
if (!MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap_finish (self, res, &error)) {
mm_obj_warn (self, "couldn't check SIM swap: %s", error->message);
g_error_free (error);
} else
mm_obj_dbg (self, "check SIM swap completed");
}
static void
quectel_qusim_unsolicited_handler (MMPortSerialAt *port,
GMatchInfo *match_info,
MMIfaceModem* self)
{
if (MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap &&
MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap_finish) {
mm_obj_dbg (self, "checking SIM swap");
MM_IFACE_MODEM_GET_INTERFACE (self)->check_for_sim_swap (
self,
(GAsyncReadyCallback)quectel_qusim_check_for_sim_swap_ready,
NULL);
}
}
gboolean
mm_shared_quectel_setup_sim_hot_swap_finish (MMIfaceModem *self,
GAsyncResult *res,
GError **error)
{
return g_task_propagate_boolean (G_TASK (res), error);
}
void
mm_shared_quectel_setup_sim_hot_swap (MMIfaceModem *self,
GAsyncReadyCallback callback,
gpointer user_data)
{
MMPortSerialAt *port_primary;
MMPortSerialAt *port_secondary;
GTask *task;
GRegex *pattern;
task = g_task_new (self, NULL, callback, user_data);
port_primary = mm_base_modem_peek_port_primary (MM_BASE_MODEM (self));
port_secondary = mm_base_modem_peek_port_secondary (MM_BASE_MODEM (self));
pattern = g_regex_new ("\\+QUSIM:\\s*1\\r\\n", G_REGEX_RAW, 0, NULL);
g_assert (pattern);
if (port_primary)
mm_port_serial_at_add_unsolicited_msg_handler (
port_primary,
pattern,
(MMPortSerialAtUnsolicitedMsgFn)quectel_qusim_unsolicited_handler,
self,
NULL);
if (port_secondary)
mm_port_serial_at_add_unsolicited_msg_handler (
port_secondary,
pattern,
(MMPortSerialAtUnsolicitedMsgFn)quectel_qusim_unsolicited_handler,
self,
NULL);
g_regex_unref (pattern);
mm_obj_dbg (self, "+QUSIM detection set up");
g_task_return_boolean (task, TRUE);
g_object_unref (task);
}
/*****************************************************************************/
static void
+6
View File
@@ -45,5 +45,11 @@ void mm_shared_quectel_firmware_load_update_settings
MMFirmwareUpdateSettings *mm_shared_quectel_firmware_load_update_settings_finish (MMIfaceModemFirmware *self,
GAsyncResult *res,
GError **error);
void mm_shared_quectel_setup_sim_hot_swap (MMIfaceModem *self,
GAsyncReadyCallback callback,
gpointer user_data);
gboolean mm_shared_quectel_setup_sim_hot_swap_finish (MMIfaceModem *self,
GAsyncResult *res,
GError **error);
#endif /* MM_SHARED_QUECTEL_H */