1) use cfsetispeed/cfsetospeed like the TTY manpage suggests
2) ignore parity/framing errors since we're not using parity anyway
3) double-check that all our TTY settings were successfully set
Fixes a firmware hang on Option GlobeTrotter Express (GE0201 with
firmware 1.12.1Hd (Date: Feb 22 2007, Time: 09:20:28)) and makes
sense in general too.
Lifted almost entirely from similar code in NetworkManager.
BUG=chromium-os:15197
TEST='dbus-send --print-reply --system --dest=org.freedesktop.ModemManager /org/freedesktop/ModemManager org.freedesktop.ModemManager.SetLogging string:DEBUG'
Also try valid log levels 'ERR', 'WARN', 'INFO', and an invalid log level, such as 'ABCDE'.
Change-Id: I2bddcd0319f4966dd293b119f68e7cc1697949b7
Reviewed-on: http://gerrit.chromium.org/gerrit/3134
Tested-by: Nathan J. Williams <njw@chromium.org>
Reviewed-by: Eric Shienbrood <ers@chromium.org>
BUG=none
TEST=Insert a SIM with a present but empty (all 0xFF) SPN and check
the system log for a (lack of) assertion errors from mm_charset_gsm_unpacked_to_utf8().
Change-Id: I1250494b9757c9bfdce56402a4471c598f41223f
Reviewed-on: http://gerrit.chromium.org/gerrit/3139
Reviewed-by: Eric Shienbrood <ers@chromium.org>
Tested-by: Nathan J. Williams <njw@chromium.org>
AT+CFUN=4 will be used when available to go to standby mode. If not supported,
(as in EGS5) AT+CFUN=7 will be used instead, which enables a CYCLIC SLEEP mode.
Flow control setup was updated to RCS/CTS so that waking up from sleep mode
works properly.
Using AT+CFUN=1,0 so that we request to avoid resetting (<rst>=0). Works
properly when powering up after having put the modem in standby mode with
AT+CFUN=4.
Note that the power-up command will only be sent if the check to see if power-up
is needed requests it.
Some modems only like the power-up command if not already in full functionality
mode. If the power-up is sent while already in full functionality mode, they get
rebooted and reseted.
With this changes, plugins can check whether they need the power-up and ask
the generic gsm code base to skip the command or not.
By default, power-up command (if any given) is never skipped.
Because the code was sending the USSD request with a "notify me via
unsolicited result code" tag, the response could come from any port,
and in was coming from other ports on various devices. But the code
expected the response on the main port, thus it got lost.
So turn the USSD response processing into an unsolicited command handler
instead, which allows us to process the response no matter where it
comes from. This patch also enables network-initiated USSD
notifications and requests since that's easy to add once the first thing
here is done.
The NWSTATE field reports both available access technology and the
actual access technology in-use when a PS connection is active, so
report the actual access tech when it's available.
For connection failures, get additional error detail. Currently,
the only error codes that are mapped are the 3GPP TS 24.008 codes
for "Unknown or missing access point name" and "Requested service
option not subscribed" (which is sometimes returned for an invalid
APN).
(random fixes and cleanups by dcbw)
We need to ensure that the supports task always has the results of the probing,
no matter if the probing was just launched by the plugin grabbing the port, or
by a previous plugin. We do this during supports_port(), by propagating to the
supports task any possible previously cached probing results.
This is because the cinterion plugin can handle RS232 modes, and checking
support for them needs to have the vendor ID probed with AT commands, so
probing is almost always issued in this plugin. By sorting last, we let
other plugins check support first.
This feature is initially disabled for all modems, but plugins can enable it by
setting a value greater than 0 for the "max-timeouts" property when creating the
modem object.
Note that even if a plugin says it wants to be sorted last, the generic plugin
will always be the last one. Also, there is no order guaranteed between two
plugins that request to be sorted last.
Port probing is extended to also query for Vendor ID and Product ID. This allows
plugins to check whether the reported IDs are expected, and thus we enable
plugins to handle modems connected via RS232 ports (where udev doesn't give any
vendor ID) or modems connected via a USB adapter (where udev gives the vendor ID
of the adapter).
Note that this effectively means that a plugin which expects these kind of modem
connections will end up always launching port probing as they won't only rely on
the vendor ID reported by udev.
We try to look for 'psinfo' indication in AT^SIND? output (available in 3G
devices from Cinterion), and if that is not available, we try to use the
AT^SMONG GPRS monitor (available in 2G devices from Cinterion).
Dan Williams
Aleksander Morgado
Thomas Grenman
Eric Shienbrood
Nathan Williams
Nathan Williams