some ITM family modems require full parameters:
AT^SGAUTH=cid,type,user,pwd
even when type is AUTH_NONE.
Fortunately, all modules of the IMT family tolerate this syntax,
so it can be adopted for the entire family.
the AT^SCFG="Radio/Band" command does not return a different answer
for different charsets.
This code was working previously because the charset was left to default (GSM)
at the time of this operation, and therefore the string was unchanged anyway.
CHAP is almost universal nowadays, and so it is a better default
than PAP
Not changed for uBlox, that prefers an error if not specified,
and for Huawei, which uses NONE with user/pwd and has 2 CHAP choices
mm-broadband-modem-qmi.c: In function 'process_common_info':
mm-broadband-modem-qmi.c:2897:30: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
/* both apply */ ;
^
Signed-off-by: Justin Standring <justin.standring@taitradio.com>
mm-broadband-modem-qmi.c: In function 'common_signal_info_get_quality':
mm-broadband-modem-qmi.c:1469:21: error: 'self' undeclared (first use in this function)
mm_obj_dbg (self, "RSSI (CDMA): %d dBm", cdma1x_rssi);
^~~~
mm-broadband-modem-qmi.c:1469:21: note: each undeclared identifier is reported only once for each function it appears in
mm_obj_dbg (self, "RSSI (CDMA): %d dBm", cdma1x_rssi);
^~~~
mm-broadband-modem-qmi.c: In function 'process_gsm_info':
mm-broadband-modem-qmi.c:2992:25: error: 'self' undeclared (first use in this function)
mm_obj_dbg (self, "no GSM service reported");
^~~~
mm-broadband-modem-qmi.c: In function 'process_wcdma_info':
mm-broadband-modem-qmi.c:3100:25: error: 'self' undeclared (first use in this function)
mm_obj_dbg (self, "no WCDMA service reported");
^~~~
mm-broadband-modem-qmi.c: In function 'process_lte_info':
mm-broadband-modem-qmi.c:3209:25: error: 'self' undeclared (first use in this function)
mm_obj_dbg (self, "no LTE service reported");
^~~~
mm-broadband-modem-qmi.c: In function 'config_signal_info_ready':
mm-broadband-modem-qmi.c:4890:21: error: 'self' undeclared (first use in this function)
mm_obj_dbg (self, "QMI operation failed: '%s'", error->message);
^~~~
Signed-off-by: Justin Standring <justin.standring@taitradio.com>
The ELS61 doesn't like authentication given without quotes:
[modem3/ttyACM1/at] --> 'AT^SGAUTH=8,1,tm,t-mobile<CR>'
[modem3/ttyACM1/at] <-- '<CR><LF>+CME ERROR: 4<CR><LF>'
Only when user/pass strings are quoted it works:
[modem6/ttyACM1/at] --> 'AT^SGAUTH=8,1,"t-mobile","tm"<CR>'
[modem6/ttyACM1/at] <-- '<CR><LF>OK<CR><LF>'
It's critical not to timeout early on devices with AT ports, or we may
end up flagging the modem as invalid.
ModemManager[26829]: <debug> [1593097973.552712] [modem1/ttyACM0/at] --> 'AT^SWWAN=1,2,1<CR>'
....
ModemManager[26829]: <debug> [1593098064.195217] [modem1] couldn't connect bearer: Serial command timed out
....
ModemManager[26829]: <error> [1593098091.167987] [modem1] port ttyACM0 timed out 10 consecutive times, marking modem as invalid
Extended the ModemManager Signal interface to include 5G signal
information for RSRP, RSRQ and SINR via libqmi. Also extended mmci
to print 5G signal info.
While at this change also the previous generic reference to ME910
in order to differentiate between ME910C1 (based on MDM9206) and
MEx10G1 (based on MDM9205).
If any enabling/disabling command fails, we consider the operation
failed, regardless of the QGPS status. This is because e.g. enabling
involves more operations than just QGPS=1, and so we should treat a
failure in the command sequence as a failure in the whole operation.
The method that reports what location capabilities are supported must
report the capabilities provided by the parent interface plus the
additional capabilities supported by the shared implementation.
Also, simplify the logic a bit reducing the amount of implemented
methods.
Instead of using the FALSE return of the method to indicate either a
fatal error (if result_error was set) or the continuation request (if
result_error wasn't set), provide a enum that has explicit states for
all three possible values (failure, success or continue).
The disabling sequence is updated so that the steps to disable the
interfaces never fail. This is done so that the modem is not left
in an "inconsistent" enabled state, if e.g. the modem is enabled and
one of the disabling steps for the interfaces ends up failing. In this
case, it is preferred to say that the modem is disabled, than having
it wrongly enabled.
The enabling sequence is updated so that if any of the steps to enable
the interfaces fail, we end up running an implicit disabling operation
to disable all the interfaces. This is to attempt to cleanup whatever
we had enabled during the enabling operation, including e.g. the open
ports context.
Aleksander Morgado
Giacinto Cifelli
Sven Schwermer
Justin Standring
Walter Hagstrom
Adrien Plazas
Daniele Palmas
ArenM