We were filtering the 4G bands supported by the module when parsing
+UBANDSEL responses, e.g. so that we would not reply unsupported bands
for a given ubandsel value.
But we need the same filtering in 2G and 3G bands, because for example
some modules may support a specific 4G band with a given ubandsel
value, but NOT the associated 3G band. E.g. the TOBY-R200 supports
EUTRAN-4 but not UTRAN-4.
We cannot have the ubandsel value comparision inside the for(;;) stop
conditions, because that would mean the loop would stop whenever the
comparison fails. We want to look for a value, so we need to loop the
whole array and stop once we find it only.
When we're changing modes or bands, we only need to keep track of the
initial power state when CFUN=4/CFUN=1 based logic is used. When using
COPS, we do not need to track initial power state or recover it after
the operation.
Make mm_ublox_get_support_config() return FALSE only when GError is
set. And also, prepare a preload_support_config() method to be run
before using any information from the support configuration (i.e.
don't do it in load_supported_bands(), do it in load_current_bands()
or in set_current_bands().
If mm_ublox_get_supported_bands() and mm_ublox_get_support_config()
both failed, we would be completing the GTask twice. Fix it by
chaining both steps so that the second one is not run if the first one
is already failed.
The u-blox plugin was originally written to support the TOBY-L4 only.
This caused issues with mmcli reporting the correct supported and
current bands because the logic was based only for the TOBY-L4 and
the AT commands used in the implementaion are only supported by
a couple of modems.
There is now a hard-coded modem list that contains the supported bands
and the supported modes. A hard-coded list was chosen over a logic
based list because ublox modems only report the frequency of the bands
they support in the current mode they are in. For further justification,
the reported frequency could relate to multiple bands that are not all
supported by the modem, and not all the supported bands are always caught
depending on the mode the modem is in (e.g. 2G, 3G, 4G). The only
realiable way to retrieve the correct supported bands is to have the list
hard-coded. Based off of the modem, the code chooses whether it is
appropriate to issue +UACT or +UBANDSEL to retrieve the current bands list.
Additionally, the appropriate AT command of +CFUN=4 or +COPS=2 is chosen
to detach from the network when the mmcli --set-current-bands command is
issued. The new setup also adds a header file that contains the modem list.
This should make adding support for future additional modems easier as long
as future modems stick to the same AT command interface that is currently
supported by the plugin.
The DW5821e uses the AT^FASTBOOT command to reset the module in
fastboot mode, ready to download new firmware.
Note: we cannot use AT^FASTBOOT=? to query for support, as that
command also triggers the reset :/
Here the string is already decided to be NULL and passing
a null pointer to %s will not work
Fixes
error: '%s' directive argument is null
Signed-off-by: Khem Raj <raj.khem@gmail.com>
commit 397faef3c5 ("mm-common-helpers: add mm_autoptr helpers for
GRegex and GMatchInfo") introduces mm_autoptr(), which implements
g_autoptr() that isn't available before glib 2.44. This patch fixes the
code to consistently uses mm_autoptr().
For subclasses of MMBroadbandModemMbim, also apply the same property
defaults. E.g. we want to avoid peridic signal quality polling and we
also want to report that SIM hot swap is supported.
This port was ignored because it was non-functional in early
development firmware images, and made device probing very slow.
This has been solved in the first production images of the DW5821e
module.
g_assert_cmpmem() isn't available until glib 2.46, while the minimum
glib version required by ModemManager is 2.36. This patch replaces the
uses of g_assert_cmpmem() with memcmp() instead.
The SARA-U2xx and LISA-U20x require the PDP context to be activated via
+UCEDATA instead of +CGACT=1 when using the CDC-ECM USB profile.
Furthermore, they expect the DHCP discover packet from the TE while the
command is running, i.e. while the modem has not replied yet. In order
to achieve that, the bearer is marked as connected as soon as the
command is issued. This makes the NetworkManager start the DHCP process.
If the modem replies with an error, the bearer will be marked
disconnected later on.
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
In preparation of deprecating the SubscriptionState property in the
Modem3gpp interface, this CL updates the altair-lte plugin to update the
Pco property in the Modem3gpp interface upon receiving %PCOINFO
notification.
USB sticks only support voice if ^CVOICE returns 0. And to enable audio
streaming on the "Application" port (whatever is returned by AT^DDSETEX=?)
we need to send AT^DDSETEX=<port> after starting the call. After that
the serial port will send and accept signed 16-bit 8000hz PCM audio, or
whatever format is returned by ^CVOICE?.
This patch is a rework of the original implementation by:
Dan Williams <dcbw@redhat.com>
Calls created from property bundles are always outgoing, while calls
created as input events from URCs during runtime are always incoming.
This change makes it mandatory to provide at least direction of the
call when the object is created, leaving the number as an optional
property that may or may not be known in advance (e.g. it would be
optional only for incoming calls).
Daniele Palmas
Aleksander Morgado
Mark-Jablonsky
Khem Raj
Ben Chan
LiuQiFeng
Dan Williams
Sven Schwermer