@@ -906,8 +906,9 @@
* @ NL80211_CMD_UNEXPECTED_FRAME : Used by an application controlling an AP
* ( or GO ) interface ( i . e . hostapd ) to ask for unexpected frames to
* implement sending deauth to stations that send unexpected class 3
* frames . Also used as the event sent by the kernel when such a frame
* is received .
* frames . For NAN_DATA interfaces , this is used to report frames from
* unknown peers ( A2 not assigned to any active NDP ) .
* Also used as the event sent by the kernel when such a frame is received .
* For the event , the % NL80211_ATTR_MAC attribute carries the TA and
* other attributes like the interface index are present .
* If used as the command it must have an interface index and you can
@@ -1361,6 +1362,59 @@
* user space that the NAN new cluster has been joined . The cluster ID is
* indicated by % NL80211_ATTR_MAC .
*
* @ NL80211_CMD_INCUMBENT_SIGNAL_DETECT : Once any incumbent signal is detected
* on the operating channel in 6 GHz band , userspace is notified with the
* signal interference bitmap using
* % NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP . The current channel
* definition is also sent .
*
* @ NL80211_CMD_NAN_SET_LOCAL_SCHED : Set the local NAN schedule . NAN must be
* operational ( % NL80211_CMD_START_NAN was executed ) . Must contain
* % NL80211_ATTR_NAN_TIME_SLOTS and % NL80211_ATTR_NAN_AVAIL_BLOB , but
* % NL80211_ATTR_NAN_CHANNEL is optional ( for example in case of a channel
* removal , that channel won ' t be provided ) .
* If % NL80211_ATTR_NAN_SCHED_DEFERRED is set , the command is a request
* from the device to perform an announced schedule update . See
* % NL80211_ATTR_NAN_SCHED_DEFERRED for more details .
* If not set , the schedule should be applied immediately .
* @ NL80211_CMD_NAN_SCHED_UPDATE_DONE : Event sent to user space to notify that
* a deferred local NAN schedule update ( requested with
* % NL80211_CMD_NAN_SET_LOCAL_SCHED and % NL80211_ATTR_NAN_SCHED_DEFERRED )
* has been completed . The presence of % NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS
* indicates that the update was successful .
* @ NL80211_CMD_NAN_SET_PEER_SCHED : Set the peer NAN schedule . NAN
* must be operational ( % NL80211_CMD_START_NAN was executed ) .
* Required attributes : % NL80211_ATTR_MAC ( peer NMI address ) and
* % NL80211_ATTR_NAN_COMMITTED_DW .
* Optionally , the full schedule can be provided by including all of :
* % NL80211_ATTR_NAN_SEQ_ID , % NL80211_ATTR_NAN_CHANNEL ( one or more ) , and
* % NL80211_ATTR_NAN_PEER_MAPS ( see & enum nl80211_nan_peer_map_attrs ) .
* If any of these three optional attributes is provided , all three must
* be provided .
* Each peer channel must be compatible with at least one local channel
* set by % NL80211_CMD_SET_LOCAL_NAN_SCHED . Different maps must not
* contain compatible channels .
* For single - radio devices ( n_radio < = 1 ) , different maps must not
* schedule the same time slot , as the device cannot operate on multiple
* channels simultaneously .
* When updating an existing peer schedule , the full new schedule must be
* provided - partial updates are not supported . The new schedule will
* completely replace the previous one .
* The peer schedule is automatically removed when the NMI station is
* removed .
* @ NL80211_CMD_NAN_ULW_UPDATE : Notification from the driver to user space
* with the updated ULW blob of the device . User space can use this blob
* to attach to frames sent to peers . This notification contains
* % NL80211_ATTR_NAN_ULW with the ULW blob .
* @ NL80211_CMD_NAN_CHANNEL_EVAC : Notification to indicate that a NAN
* channel has been evacuated due to resource conflicts with other
* interfaces . This can happen when another interface sharing the channel
* resource with NAN needs to move to a different channel ( e . g . , channel
* switch or link switch on a BSS interface ) .
* The notification contains % NL80211_ATTR_NAN_CHANNEL attribute
* identifying the evacuated channel .
* User space may reconfigure the local schedule in response to this
* notification .
* @ NL80211_CMD_MAX : highest used command number
* @ __NL80211_CMD_AFTER_LAST : internal use
*/
@@ -1624,6 +1678,18 @@ enum nl80211_commands {
NL80211_CMD_NAN_NEXT_DW_NOTIFICATION ,
NL80211_CMD_NAN_CLUSTER_JOINED ,
NL80211_CMD_INCUMBENT_SIGNAL_DETECT ,
NL80211_CMD_NAN_SET_LOCAL_SCHED ,
NL80211_CMD_NAN_SCHED_UPDATE_DONE ,
NL80211_CMD_NAN_SET_PEER_SCHED ,
NL80211_CMD_NAN_ULW_UPDATE ,
NL80211_CMD_NAN_CHANNEL_EVAC ,
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2651,7 +2717,8 @@ enum nl80211_commands {
* a flow is assigned on each round of the DRR scheduler .
* @ NL80211_ATTR_HE_CAPABILITY : HE Capability information element ( from
* association request when used with NL80211_CMD_NEW_STATION ) . Can be set
* only if % NL80211_STA_FLAG_WME is set .
* only if % NL80211_STA_FLAG_WME is set ( except for NAN , which uses WME
* anyway ) .
*
* @ NL80211_ATTR_FTM_RESPONDER : nested attribute which user - space can include
* in % NL80211_CMD_START_AP or % NL80211_CMD_SET_BEACON for fine timing
@@ -2983,6 +3050,95 @@ enum nl80211_commands {
* @ NL80211_ATTR_DISABLE_UHR : Force UHR capable interfaces to disable
* this feature during association . This is a flag attribute .
* Currently only supported in mac80211 drivers .
* @ NL80211_ATTR_NAN_CHANNEL : This is a nested attribute . There can be multiple
* attributes of this type , each one represents a channel definition and
* consists of top - level attributes like % NL80211_ATTR_WIPHY_FREQ .
* When used with % NL80211_CMD_NAN_SET_LOCAL_SCHED , it specifies
* the channel definitions on which the radio needs to operate during
* specific time slots . All of the channel definitions should be mutually
* incompatible . With this command , % NL80211_ATTR_NAN_CHANNEL_ENTRY and
* % NL80211_ATTR_NAN_RX_NSS are mandatory .
* When used with % NL80211_CMD_NAN_SET_PEER_SCHED , it configures the
* peer NAN channels . In that case , the channel definitions can be
* compatible to each other , or even identical just with different RX NSS .
* With this command , % NL80211_ATTR_NAN_CHANNEL_ENTRY and
* % NL80211_ATTR_NAN_RX_NSS are mandatory .
* The number of channels should fit the current configuration of channels
* and the possible interface combinations .
* If an existing NAN channel is changed but the chandef isn ' t , the
* channel entry must also remain unchanged .
* When used with % NL80211_CMD_NAN_CHANNEL_EVAC , this identifies the
* channels that were evacuated .
* @ NL80211_ATTR_NAN_CHANNEL_ENTRY : a byte array of 6 bytes . contains the
* Channel Entry as defined in Wi - Fi Aware ( TM ) 4.0 specification Table
* 100 ( Channel Entry format for the NAN Availability attribute ) .
* @ NL80211_ATTR_NAN_RX_NSS : ( u8 ) RX NSS used for a NAN channel . This is
* used with % NL80211_ATTR_NAN_CHANNEL when configuring NAN channels with
* % NL80211_CMD_NAN_SET_LOCAL_SCHED or % NL80211_CMD_NAN_SET_PEER_SCHED .
* @ NL80211_ATTR_NAN_TIME_SLOTS : an array of u8 values and 32 cells . each value
* maps a time slot to the chandef on which the radio should operate on in
* that time . % NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled .
* The chandef is represented using its index , where the index is the
* sequential number of the % NL80211_ATTR_NAN_CHANNEL attribute within all
* the attributes of this type .
* Each slots spans over 16 TUs , hence the entire schedule spans over
* 512 TUs . Other slot durations and periods are currently not supported .
* @ NL80211_ATTR_NAN_AVAIL_BLOB : ( Binary ) The NAN Availability attribute blob ,
* including the attribute header , as defined in Wi - Fi Aware ( TM ) 4.0
* specification Table 93 ( NAN Availability attribute format ) . Required with
* % NL80211_CMD_NAN_SET_LOCAL_SCHED to provide the raw NAN Availability
* attribute . Used by the device to publish Schedule Update NAFs .
* @ NL80211_ATTR_NAN_SCHED_DEFERRED : Flag attribute used with
* % NL80211_CMD_NAN_SET_LOCAL_SCHED . When present , the command is a
* request from the device to perform an announced schedule update . This
* means that it needs to send the updated NAN availability to the peers ,
* and do the actual switch on the right time ( i . e . at the end of the slot
* after the slot in which the updated NAN Availability was sent ) . Since
* the slots management is done in the device , the update to the peers
* needs to be sent by the device , so it knows the actual switch time .
* If the flag is not set , the schedule should be applied immediately .
* When this flag is set , the total number of NAN channels from both the
* old and new schedules must not exceed the allowed number of local NAN
* channels , because with deferred scheduling the old channels cannot be
* removed before adding the new ones to free up space .
* @ NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS : flag attribute used with
* % NL80211_CMD_NAN_SCHED_UPDATE_DONE to indicate that the deferred
* schedule update completed successfully . If this flag is not present ,
* the update failed .
* @ NL80211_ATTR_NAN_NMI_MAC : The address of the NMI station to which this NDI
* station belongs . Used with % NL80211_CMD_NEW_STATION when adding an NDI
* station .
* @ NL80211_ATTR_NAN_ULW : ( Binary ) The initial ULW ( s ) as published by the
* peer , as defined in the Wi - Fi Aware ( TM ) 4.0 specification Table 109
* ( Unaligned Schedule attribute format ) . Used to configure the device
* with the initial ULW ( s ) of a peer , before the device starts tracking it .
* @ NL80211_ATTR_NAN_COMMITTED_DW : ( u16 ) The committed DW as published by the
* peer , as defined in the Wi - Fi Aware ( TM ) 4.0 specification Table 80
* ( Committed DW Information field format ) .
* @ NL80211_ATTR_NAN_SEQ_ID : ( u8 ) The sequence ID of the peer schedule that
* % NL80211_CMD_NAN_SET_PEER_SCHED defines . The device follows the
* sequence ID in the frames to identify newer schedules . Once a schedule
* with a higher sequence ID is received , the device may stop communicating
* with that peer until a new peer schedule with a matching sequence ID is
* received .
* @ NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME : ( u16 ) The maximum channel switch
* time , in microseconds .
* @ NL80211_ATTR_NAN_PEER_MAPS : Nested array of peer schedule maps .
* Used with % NL80211_CMD_NAN_SET_PEER_SCHED . Contains up to 2 entries ,
* each containing nested attributes from & enum nl80211_nan_peer_map_attrs .
*
* @ NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP : u32 attribute specifying
* the signal interference bitmap detected on the operating bandwidth for
* % NL80211_CMD_INCUMBENT_SIGNAL_DETECT . Each bit represents a 20 MHz
* segment , lowest bit corresponds to the lowest 20 MHz segment , in the
* operating bandwidth where the interference is detected . Punctured
* sub - channels are included in the bitmap structure ; however , since
* interference detection is not performed on these sub - channels , their
* corresponding bits are consistently set to zero .
*
* @ NL80211_ATTR_UHR_OPERATION : Full UHR Operation element , as it appears in
* association response etc . , since it ' s abridged in the beacon . Used
* for START_AP etc .
*
* @ NUM_NL80211_ATTR : total number of nl80211_attrs available
* @ NL80211_ATTR_MAX : highest attribute number currently defined
@@ -3557,6 +3713,26 @@ enum nl80211_attrs {
NL80211_ATTR_UHR_CAPABILITY ,
NL80211_ATTR_DISABLE_UHR ,
NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP ,
NL80211_ATTR_UHR_OPERATION ,
NL80211_ATTR_NAN_CHANNEL ,
NL80211_ATTR_NAN_CHANNEL_ENTRY ,
NL80211_ATTR_NAN_TIME_SLOTS ,
NL80211_ATTR_NAN_RX_NSS ,
NL80211_ATTR_NAN_AVAIL_BLOB ,
NL80211_ATTR_NAN_SCHED_DEFERRED ,
NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS ,
NL80211_ATTR_NAN_NMI_MAC ,
NL80211_ATTR_NAN_ULW ,
NL80211_ATTR_NAN_COMMITTED_DW ,
NL80211_ATTR_NAN_SEQ_ID ,
NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME ,
NL80211_ATTR_NAN_PEER_MAPS ,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST ,
@@ -3650,6 +3826,9 @@ enum nl80211_attrs {
* @ NL80211_IFTYPE_OCB : Outside Context of a BSS
* This mode corresponds to the MIB variable dot11OCBActivated = true
* @ NL80211_IFTYPE_NAN : NAN device interface type ( not a netdev )
* @ NL80211_IFTYPE_NAN_DATA : NAN data interface type ( netdev ) ; NAN data
* interfaces can only be brought up ( IFF_UP ) when a NAN interface
* already exists and NAN has been started ( using % NL80211_CMD_START_NAN ) .
* @ NL80211_IFTYPE_MAX : highest interface type number currently defined
* @ NUM_NL80211_IFTYPES : number of defined interface types
*
@@ -3671,6 +3850,7 @@ enum nl80211_iftype {
NL80211_IFTYPE_P2P_DEVICE ,
NL80211_IFTYPE_OCB ,
NL80211_IFTYPE_NAN ,
NL80211_IFTYPE_NAN_DATA ,
/* keep last */
NUM_NL80211_IFTYPES ,
@@ -4359,6 +4539,46 @@ enum nl80211_band_attr {
# define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
/**
* enum nl80211_nan_phy_cap_attr - NAN PHY capabilities attributes
* @ __NL80211_NAN_PHY_CAP_ATTR_INVALID : attribute number 0 is reserved
* @ NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET : 16 - byte attribute containing HT MCS set
* @ NL80211_NAN_PHY_CAP_ATTR_HT_CAPA : HT capabilities ( u16 )
* @ NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR : HT A - MPDU factor ( u8 )
* @ NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY : HT A - MPDU density ( u8 )
* @ NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET : 8 - byte attribute containing VHT MCS set
* @ NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA : VHT capabilities ( u32 )
* @ NL80211_NAN_PHY_CAP_ATTR_HE_MAC : HE MAC capabilities
* @ NL80211_NAN_PHY_CAP_ATTR_HE_PHY : HE PHY capabilities
* @ NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET : HE supported NSS / MCS combinations
* @ NL80211_NAN_PHY_CAP_ATTR_HE_PPE : HE PPE thresholds
* @ NL80211_NAN_PHY_CAP_ATTR_MAX : highest NAN PHY cap attribute number
* @ __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST : internal use
*/
enum nl80211_nan_phy_cap_attr {
__NL80211_NAN_PHY_CAP_ATTR_INVALID ,
/* HT capabilities */
NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET ,
NL80211_NAN_PHY_CAP_ATTR_HT_CAPA ,
NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR ,
NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY ,
/* VHT capabilities */
NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET ,
NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA ,
/* HE capabilities */
NL80211_NAN_PHY_CAP_ATTR_HE_MAC ,
NL80211_NAN_PHY_CAP_ATTR_HE_PHY ,
NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET ,
NL80211_NAN_PHY_CAP_ATTR_HE_PPE ,
/* keep last */
__NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST ,
NL80211_NAN_PHY_CAP_ATTR_MAX = __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST - 1
} ;
/**
* enum nl80211_wmm_rule - regulatory wmm rule
*
@@ -4480,6 +4700,10 @@ enum nl80211_wmm_rule {
* as a non - primary subchannel . Only applicable to S1G channels .
* @ NL80211_FREQUENCY_ATTR_NO_UHR : UHR operation is not allowed on this channel
* in current regulatory domain .
* @ NL80211_FREQUENCY_ATTR_CAC_START_TIME : Channel Availability Check ( CAC )
* start time ( CLOCK_BOOTTIME , nanoseconds ) . Only present when CAC is
* currently in progress on this channel .
* @ NL80211_FREQUENCY_ATTR_PAD : attribute used for padding for 64 - bit alignment
* @ NL80211_FREQUENCY_ATTR_MAX : highest frequency attribute number
* currently defined
* @ __NL80211_FREQUENCY_ATTR_AFTER_LAST : internal use
@@ -4530,6 +4754,8 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_16MHZ ,
NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY ,
NL80211_FREQUENCY_ATTR_NO_UHR ,
NL80211_FREQUENCY_ATTR_CAC_START_TIME ,
NL80211_FREQUENCY_ATTR_PAD ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST ,
@@ -5466,6 +5692,8 @@ enum nl80211_bss_status {
* @ NL80211_AUTHTYPE_FILS_SK_PFS : Fast Initial Link Setup shared key with PFS
* @ NL80211_AUTHTYPE_FILS_PK : Fast Initial Link Setup public key
* @ NL80211_AUTHTYPE_EPPKE : Enhanced Privacy Protection Key Exchange
* @ NL80211_AUTHTYPE_IEEE8021X : IEEE 802.1 X authentication utilizing
* Authentication frames
* @ __NL80211_AUTHTYPE_NUM : internal
* @ NL80211_AUTHTYPE_MAX : maximum valid auth algorithm
* @ NL80211_AUTHTYPE_AUTOMATIC : determine automatically ( if necessary by
@@ -5482,6 +5710,7 @@ enum nl80211_auth_type {
NL80211_AUTHTYPE_FILS_SK_PFS ,
NL80211_AUTHTYPE_FILS_PK ,
NL80211_AUTHTYPE_EPPKE ,
NL80211_AUTHTYPE_IEEE8021X ,
/* keep last */
__NL80211_AUTHTYPE_NUM ,
@@ -6795,6 +7024,11 @@ enum nl80211_feature_flags {
* frames in both non ‑ AP STA and AP mode as specified in
* " IEEE P802.11bi/D3.0, 12.16.6 " .
*
* @ NL80211_EXT_FEATURE_IEEE8021X_AUTH : Driver supports IEEE 802.1 X
* authentication utilizing Authentication frames with user space SME
* ( NL80211_CMD_AUTHENTICATE ) in non - AP STA mode , as specified in
* " IEEE P802.11bi/D4.0, 12.16.5 " .
*
* @ NUM_NL80211_EXT_FEATURES : number of extended features .
* @ MAX_NL80211_EXT_FEATURES : highest extended feature index .
*/
@@ -6873,6 +7107,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_BEACON_RATE_EHT ,
NL80211_EXT_FEATURE_EPPKE ,
NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION ,
NL80211_EXT_FEATURE_IEEE8021X_AUTH ,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES ,
@@ -8517,6 +8752,8 @@ enum nl80211_s1g_short_beacon_attrs {
* @ NL80211_NAN_CAPA_CAPABILITIES : u8 attribute containing the
* capabilities of the device as defined in Wi - Fi Aware ( TM )
* specification Table 79 ( Capabilities field ) .
* @ NL80211_NAN_CAPA_PHY : nested attribute containing band - agnostic
* capabilities for NAN data path . See & enum nl80211_nan_phy_cap_attr .
* @ __NL80211_NAN_CAPABILITIES_LAST : Internal
* @ NL80211_NAN_CAPABILITIES_MAX : Highest NAN capability attribute .
*/
@@ -8529,9 +8766,38 @@ enum nl80211_nan_capabilities {
NL80211_NAN_CAPA_NUM_ANTENNAS ,
NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME ,
NL80211_NAN_CAPA_CAPABILITIES ,
NL80211_NAN_CAPA_PHY ,
/* keep last */
__NL80211_NAN_CAPABILITIES_LAST ,
NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1 ,
} ;
/**
* enum nl80211_nan_peer_map_attrs - NAN peer schedule map attributes
*
* Nested attributes used within % NL80211_ATTR_NAN_PEER_MAPS to define
* individual peer schedule maps .
*
* @ __NL80211_NAN_PEER_MAP_ATTR_INVALID : Invalid
* @ NL80211_NAN_PEER_MAP_ATTR_MAP_ID : ( u8 ) The map ID for this schedule map .
* @ NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS : An array of u8 values with 32 cells .
* Each value maps a time slot to a channel index within the schedule ' s
* channel list ( % NL80211_ATTR_NAN_CHANNEL attributes ) .
* % NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled .
* @ __NL80211_NAN_PEER_MAP_ATTR_LAST : Internal
* @ NL80211_NAN_PEER_MAP_ATTR_MAX : Highest peer map attribute
*/
enum nl80211_nan_peer_map_attrs {
__NL80211_NAN_PEER_MAP_ATTR_INVALID ,
NL80211_NAN_PEER_MAP_ATTR_MAP_ID ,
NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS ,
/* keep last */
__NL80211_NAN_PEER_MAP_ATTR_LAST ,
NL80211_NAN_PEER_MAP_ATTR_MAX = __NL80211_NAN_PEER_MAP_ATTR_LAST - 1 ,
} ;
# define NL80211_NAN_SCHED_NOT_AVAIL_SLOT 0xff
# endif /* __LINUX_NL80211_H */
Yu Watanabe