unit: unit type dependent status messages

Instead of generic "Starting..." and "Started" messages for all unit use
type-dependent messages. For example, mounts will announce "Mounting..."
and "Mounted".

Add status messages to units of types that used to be entirely silent
(automounts, sockets, targets, devices). For unit types whose jobs are
instantaneous, report only the job completion, not the starting event.
Socket units with non-instantaneous jobs are rare (Exec*= is not used
often in socket units), so I chose not to print the starting messages
for them either.

This will hopefully give people better understanding of the boot.
This commit is contained in:
Michal Schmidt
2012-05-14 14:29:53 +02:00
parent 9ab7a8d2a3
commit c69182961b
11 changed files with 174 additions and 41 deletions
+13 -1
View File
@@ -885,5 +885,17 @@ const UnitVTable automount_vtable = {
.bus_message_handler = bus_automount_message_handler,
.bus_invalidating_properties = bus_automount_invalidating_properties,
.shutdown = automount_shutdown
.shutdown = automount_shutdown,
.status_message_formats = {
.finished_start_job = {
[JOB_DONE] = "Set up automount %s.",
[JOB_FAILED] = "Failed to set up automount %s.",
[JOB_DEPENDENCY] = "Dependency failed for %s.",
},
.finished_stop_job = {
[JOB_DONE] = "Unset automount %s.",
[JOB_FAILED] = "Failed to unset automount %s.",
},
},
};
+11 -1
View File
@@ -613,5 +613,15 @@ const UnitVTable device_vtable = {
.following_set = device_following_set,
.enumerate = device_enumerate,
.shutdown = device_shutdown
.shutdown = device_shutdown,
.status_message_formats = {
.starting_stopping = {
[0] = "Expecting device %s...",
},
.finished_start_job = {
[JOB_DONE] = "Found device %s.",
[JOB_TIMEOUT] = "Timed out waiting for device %s.",
},
},
};
+31 -18
View File
@@ -550,28 +550,37 @@ int job_run_and_invalidate(Job *j) {
}
static void job_print_status_message(Unit *u, JobType t, JobResult result) {
assert(u);
const UnitStatusMessageFormats *format_table;
const char *format;
format_table = &UNIT_VTABLE(u)->status_message_formats;
if (!format_table)
return;
if (t == JOB_START) {
format = format_table->finished_start_job[result];
if (!format)
return;
switch (result) {
case JOB_DONE:
if (u->condition_result)
unit_status_printf(u, ANSI_HIGHLIGHT_GREEN_ON " OK " ANSI_HIGHLIGHT_OFF, "Started %s.", unit_description(u));
unit_status_printf(u, ANSI_HIGHLIGHT_GREEN_ON " OK " ANSI_HIGHLIGHT_OFF, format, unit_description(u));
break;
case JOB_FAILED:
unit_status_printf(u, ANSI_HIGHLIGHT_RED_ON "FAILED" ANSI_HIGHLIGHT_OFF, "Failed to start %s.", unit_description(u));
unit_status_printf(u, NULL, "See 'systemctl status %s' for details.", u->id);
unit_status_printf(u, ANSI_HIGHLIGHT_RED_ON "FAILED" ANSI_HIGHLIGHT_OFF, format, unit_description(u));
unit_status_printf(u, "", "See 'systemctl status %s' for details.", u->id);
break;
case JOB_DEPENDENCY:
unit_status_printf(u, ANSI_HIGHLIGHT_YELLOW_ON "DEPEND" ANSI_HIGHLIGHT_OFF, "Dependency failed. Aborted start of %s.", unit_description(u));
unit_status_printf(u, ANSI_HIGHLIGHT_YELLOW_ON "DEPEND" ANSI_HIGHLIGHT_OFF, format, unit_description(u));
break;
case JOB_TIMEOUT:
unit_status_printf(u, ANSI_HIGHLIGHT_RED_ON " TIME " ANSI_HIGHLIGHT_OFF, "Timed out starting %s.", unit_description(u));
unit_status_printf(u, ANSI_HIGHLIGHT_RED_ON " TIME " ANSI_HIGHLIGHT_OFF, format, unit_description(u));
break;
default:
@@ -580,15 +589,19 @@ static void job_print_status_message(Unit *u, JobType t, JobResult result) {
} else if (t == JOB_STOP) {
format = format_table->finished_stop_job[result];
if (!format)
return;
switch (result) {
case JOB_TIMEOUT:
unit_status_printf(u, ANSI_HIGHLIGHT_RED_ON " TIME " ANSI_HIGHLIGHT_OFF, "Timed out stopping %s.", unit_description(u));
unit_status_printf(u, ANSI_HIGHLIGHT_RED_ON " TIME " ANSI_HIGHLIGHT_OFF, format, unit_description(u));
break;
case JOB_DONE:
case JOB_FAILED:
unit_status_printf(u, ANSI_HIGHLIGHT_GREEN_ON " OK " ANSI_HIGHLIGHT_OFF, "Stopped %s.", unit_description(u));
unit_status_printf(u, ANSI_HIGHLIGHT_GREEN_ON " OK " ANSI_HIGHLIGHT_OFF, format, unit_description(u));
break;
default:
@@ -607,34 +620,34 @@ int job_finish_and_invalidate(Job *j, JobResult result, bool recursive) {
assert(j->installed);
assert(j->type < _JOB_TYPE_MAX_IN_TRANSACTION);
u = j->unit;
t = j->type;
j->result = result;
log_debug("Job %s/%s finished, result=%s", u->id, job_type_to_string(t), job_result_to_string(result));
job_print_status_message(u, t, result);
job_add_to_dbus_queue(j);
/* Patch restart jobs so that they become normal start jobs */
if (result == JOB_DONE && j->type == JOB_RESTART) {
if (result == JOB_DONE && t == JOB_RESTART) {
job_change_type(j, JOB_START);
j->state = JOB_WAITING;
job_add_to_run_queue(j);
u = j->unit;
goto finish;
}
j->result = result;
log_debug("Job %s/%s finished, result=%s", j->unit->id, job_type_to_string(j->type), job_result_to_string(result));
if (result == JOB_FAILED)
j->manager->n_failed_jobs ++;
u = j->unit;
t = j->type;
job_uninstall(j);
job_free(j);
job_print_status_message(u, t, result);
/* Fail depending jobs on failure */
if (result != JOB_DONE && recursive) {
+5 -5
View File
@@ -34,11 +34,6 @@ typedef enum JobState JobState;
typedef enum JobMode JobMode;
typedef enum JobResult JobResult;
#include "manager.h"
#include "unit.h"
#include "hashmap.h"
#include "list.h"
/* Be careful when changing the job types! Adjust job_merging_table[] accordingly! */
enum JobType {
JOB_START, /* if a unit does not support being started, we'll just wait until it becomes active */
@@ -107,6 +102,11 @@ enum JobResult {
_JOB_RESULT_INVALID = -1
};
#include "manager.h"
#include "unit.h"
#include "hashmap.h"
#include "list.h"
struct JobDependency {
/* Encodes that the 'subject' job needs the 'object' job in
* some way. This structure is used only while building a transaction. */
+19 -2
View File
@@ -1911,7 +1911,6 @@ const UnitVTable mount_vtable = {
.no_alias = true,
.no_instances = true,
.show_status = true,
.init = mount_init,
.load = mount_load,
@@ -1945,5 +1944,23 @@ const UnitVTable mount_vtable = {
.bus_invalidating_properties = bus_mount_invalidating_properties,
.enumerate = mount_enumerate,
.shutdown = mount_shutdown
.shutdown = mount_shutdown,
.status_message_formats = {
.starting_stopping = {
[0] = "Mounting %s...",
[1] = "Unmounting %s...",
},
.finished_start_job = {
[JOB_DONE] = "Mounted %s.",
[JOB_FAILED] = "Failed to mount %s.",
[JOB_DEPENDENCY] = "Dependency failed for %s.",
[JOB_TIMEOUT] = "Timed out mounting %s.",
},
.finished_stop_job = {
[JOB_DONE] = "Unmounted %s.",
[JOB_FAILED] = "Failed unmounting %s.",
[JOB_TIMEOUT] = "Timed out unmounting %s.",
},
},
};
+18 -2
View File
@@ -3780,7 +3780,6 @@ const UnitVTable service_vtable = {
"Unit\0"
"Service\0"
"Install\0",
.show_status = true,
.init = service_init,
.done = service_done,
@@ -3826,6 +3825,23 @@ const UnitVTable service_vtable = {
.bus_invalidating_properties = bus_service_invalidating_properties,
#ifdef HAVE_SYSV_COMPAT
.enumerate = service_enumerate
.enumerate = service_enumerate,
#endif
.status_message_formats = {
.starting_stopping = {
[0] = "Starting %s...",
[1] = "Stopping %s...",
},
.finished_start_job = {
[JOB_DONE] = "Started %s.",
[JOB_FAILED] = "Failed to start %s.",
[JOB_DEPENDENCY] = "Dependency failed for %s.",
[JOB_TIMEOUT] = "Timed out starting %s.",
},
.finished_stop_job = {
[JOB_DONE] = "Stopped %s.",
[JOB_FAILED] = "Stopped (with error) %s.",
[JOB_TIMEOUT] = "Timed out stopping %s.",
},
},
};
+19 -1
View File
@@ -2220,5 +2220,23 @@ const UnitVTable socket_vtable = {
.bus_interface = "org.freedesktop.systemd1.Socket",
.bus_message_handler = bus_socket_message_handler,
.bus_invalidating_properties = bus_socket_invalidating_properties
.bus_invalidating_properties = bus_socket_invalidating_properties,
.status_message_formats = {
/*.starting_stopping = {
[0] = "Starting socket %s...",
[1] = "Stopping socket %s...",
},*/
.finished_start_job = {
[JOB_DONE] = "Listening on %s.",
[JOB_FAILED] = "Failed to listen on %s.",
[JOB_DEPENDENCY] = "Dependency failed for %s.",
[JOB_TIMEOUT] = "Timed out starting %s.",
},
.finished_stop_job = {
[JOB_DONE] = "Closed %s.",
[JOB_FAILED] = "Failed stopping %s.",
[JOB_TIMEOUT] = "Timed out stopping %s.",
},
},
};
+19 -2
View File
@@ -1378,7 +1378,6 @@ const UnitVTable swap_vtable = {
.no_alias = true,
.no_instances = true,
.show_status = true,
.init = swap_init,
.load = swap_load,
@@ -1414,5 +1413,23 @@ const UnitVTable swap_vtable = {
.following_set = swap_following_set,
.enumerate = swap_enumerate,
.shutdown = swap_shutdown
.shutdown = swap_shutdown,
.status_message_formats = {
.starting_stopping = {
[0] = "Activating swap %s...",
[1] = "Deactivating swap %s...",
},
.finished_start_job = {
[JOB_DONE] = "Activated swap %s.",
[JOB_FAILED] = "Failed to activate swap %s.",
[JOB_DEPENDENCY] = "Dependency failed for %s.",
[JOB_TIMEOUT] = "Timed out activating swap %s.",
},
.finished_stop_job = {
[JOB_DONE] = "Deactivated swap %s.",
[JOB_FAILED] = "Failed deactivating swap %s.",
[JOB_TIMEOUT] = "Timed out deactivating swap %s.",
},
},
};
+11 -1
View File
@@ -220,5 +220,15 @@ const UnitVTable target_vtable = {
.sub_state_to_string = target_sub_state_to_string,
.bus_interface = "org.freedesktop.systemd1.Target",
.bus_message_handler = bus_target_message_handler
.bus_message_handler = bus_target_message_handler,
.status_message_formats = {
.finished_start_job = {
[JOB_DONE] = "Reached target %s.",
[JOB_DEPENDENCY] = "Dependency failed for %s.",
},
.finished_stop_job = {
[JOB_DONE] = "Stopped target %s.",
},
},
};
+19 -5
View File
@@ -930,6 +930,21 @@ bool unit_condition_test(Unit *u) {
return u->condition_result;
}
static void unit_status_print_starting_stopping(Unit *u, bool stopping) {
const UnitStatusMessageFormats *format_table;
const char *format;
format_table = &UNIT_VTABLE(u)->status_message_formats;
if (!format_table)
return;
format = format_table->starting_stopping[stopping];
if (!format)
return;
unit_status_printf(u, "", format, unit_description(u));
}
/* Errors:
* -EBADR: This unit type does not support starting.
* -EALREADY: Unit is already started.
@@ -969,6 +984,8 @@ int unit_start(Unit *u) {
return unit_start(following);
}
unit_status_print_starting_stopping(u, false);
/* If it is stopped, but we cannot start it, then fail */
if (!UNIT_VTABLE(u)->start)
return -EBADR;
@@ -981,7 +998,6 @@ int unit_start(Unit *u) {
unit_add_to_dbus_queue(u);
unit_status_printf(u, "", "Starting %s...", unit_description(u));
return UNIT_VTABLE(u)->start(u);
}
@@ -1018,12 +1034,13 @@ int unit_stop(Unit *u) {
return unit_stop(following);
}
unit_status_print_starting_stopping(u, true);
if (!UNIT_VTABLE(u)->stop)
return -EBADR;
unit_add_to_dbus_queue(u);
unit_status_printf(u, "", "Stopping %s...", unit_description(u));
return UNIT_VTABLE(u)->stop(u);
}
@@ -2544,9 +2561,6 @@ void unit_status_printf(Unit *u, const char *status, const char *format, ...) {
assert(u);
assert(format);
if (!UNIT_VTABLE(u)->show_status)
return;
if (!manager_get_show_status(u->manager))
return;
+9 -3
View File
@@ -32,6 +32,7 @@ typedef enum UnitLoadState UnitLoadState;
typedef enum UnitActiveState UnitActiveState;
typedef enum UnitDependency UnitDependency;
typedef struct UnitRef UnitRef;
typedef struct UnitStatusMessageFormats UnitStatusMessageFormats;
#include "set.h"
#include "util.h"
@@ -266,6 +267,12 @@ struct UnitRef {
LIST_FIELDS(UnitRef, refs);
};
struct UnitStatusMessageFormats {
const char *starting_stopping[2];
const char *finished_start_job[_JOB_RESULT_MAX];
const char *finished_stop_job[_JOB_RESULT_MAX];
};
#include "service.h"
#include "timer.h"
#include "socket.h"
@@ -392,6 +399,8 @@ struct UnitVTable {
/* The interface name */
const char *bus_interface;
UnitStatusMessageFormats status_message_formats;
/* Can units of this type have multiple names? */
bool no_alias:1;
@@ -400,9 +409,6 @@ struct UnitVTable {
/* Exclude from automatic gc */
bool no_gc:1;
/* Show status updates on the console */
bool show_status:1;
};
extern const UnitVTable * const unit_vtable[_UNIT_TYPE_MAX];