The search domain limit is already enforced by dns_search_domain_new(),
but in this case it's way too late. Let's enforce it during the first
loop to avoid unnecessary parsing.
mdadm --zero-superblock only wipes the MD metadata on the underlying
disks, not the LVM PV header that lives in the array data area. When
the VM is restarted and the test re-creates the array with the same
UUID, /dev/md127 exposes the old data including the LVM PV header, so
udev's 69-lvm.rules auto-triggers lvm-activate-mdlvm_vg.service which
races with the test's own pvcreate for exclusive access on /dev/md127.
Wipe the LVM signature off the MD device (and the underlying disks as
a belt-and-braces measure) to avoid the race on re-run, fixing failures
when the VM is rebooted instead of shut down.
Co-developed-by: Claude Opus 4.7 <noreply@anthropic.com>
The image configuration was changed and the main sources are
now in a drop-in apt sources files too, so deleting the whole
drop-in directory breaks installing packages. Just delete the
disabled ones and chrome.
On initrds where nfnetlink module is missing, trying to open
a NETLINK_NETFILTER netlink socket takes a lot of time then fails.
This makes boot noticibly slower. Even though probably no
unit in an initrd need netfilter.
So here we delay opening the socket until we know we need it.
write_to_journal() was called via $(...) command substitution, so
SERVICE_COUNTER++ ran in a subshell and never incremented in the
parent:
[ 1492.668302] TEST-04-JOURNAL.sh[15064]: + local service=test-0-18493.service
[ 1492.725882] TEST-04-JOURNAL.sh[15064]: + local service=test-0-18009.service
[ 1492.739643] TEST-04-JOURNAL.sh[15064]: + local service=test-0-18493.service
[ 1492.774586] TEST-04-JOURNAL.sh[15064]: + local service=test-0-25540.service
[ 1492.815664] TEST-04-JOURNAL.sh[15064]: + local service=test-0-15916.service
[ 1492.867067] TEST-04-JOURNAL.sh[15064]: + local service=test-0-20327.service
[ 1492.899077] TEST-04-JOURNAL.sh[15064]: + local service=test-0-86.service
[ 1497.289715] TEST-04-JOURNAL.sh[15064]: + local service=test-0-10849.service
[ 1497.335791] TEST-04-JOURNAL.sh[15064]: + local service=test-0-18009.service
With 99999 possible unit names collisions are rare but not impossible,
so every now and then a CI run fails.
Have write_to_journal() set a global SERVICE_NAME variable instead and
call it directly so SERVICE_COUNTER actually goes up through the test.
Let's cap the number of states/patterns per query to something
reasonable, i.e. max 256 states and 4K patterns per query.
---
Also, use the env assignments limit in a couple more places.
When the source buffer is NULL, the firmware is supposed to try to load the UKI
with simple filesystem protocol then load file 2 protocol. But it seems
on some versions of AMI, it does not use simple filesystem protocol,
and then fails to load if the ESP was loaded from an El Torito boot
catalog. Trying to load the source buffer from the simple filesystem protocol
protocols seems work around this limitation.
Shim for example, also loads the source buffer before calling LoadImage. So it
seems to be a safe thing to do. We could also maybe in the future use load file
2 protocol if simple filesystem failed in the first place.
These tests leave a lot of state around, and when the test is re-run,
for example due to the qemu bug that makes a VM reboot instead of
shutting down, it fails.
When qemu reboots instead of shutting down after the last iteration,
the profile is already set to profile2 but the /root/encrypted.raw is
gone so the test fails. Reset the default boot entry at the end of the
test to make it robust against reruns.
Fixes https://github.com/systemd/systemd/issues/39553
The test leaves a lot of state around, and when the test is re-run,
for example due to the qemu bug that makes a VM reboot instead of
shutting down, it fails.
Do more cleanups in the traps.
[ 162.642175] TEST-70-TPM2.sh[2815]: Calculated public key name: 000b2b66edc3a466e81059286aaf38d09ea42a7a9dcdf6ba3b664c62f0cae4ce4f66
[ 162.642628] TEST-70-TPM2.sh[2815]: PolicyAuthorize calculated digest: 2caa740101f65734d50395d6abc64fa46015d40d1f5de239434578544e592a92
[ 162.643681] TEST-70-TPM2.sh[2815]: Calculated NV index name: 000b439cfa1534815bbe8d33b80c56f5a8d17d36fe94a7782b23a37b50def5fc5eaa
[ 162.645111] TEST-70-TPM2.sh[2815]: PolicyAuthorizeNV calculated digest: 69ee0e89fafe6b9df2cd6a5defbf74aa46cf6d92703e645d463549da4ba5e1a4
[ 162.645407] TEST-70-TPM2.sh[2815]: Combined signed PCR policies and pcrlock policies cannot be calculated offline, currently.
[ 162.649576] TEST-70-TPM2.sh[2815]: Releasing crypt device /dev/loop0 context.
[ 162.652433] TEST-70-TPM2.sh[2815]: Releasing device-mapper backend.
[ 162.653518] TEST-70-TPM2.sh[2815]: Closing read only fd for /dev/loop0.
[ 162.654359] TEST-70-TPM2.sh[2815]: Closing read write fd for /dev/loop0.
[ 162.654786] TEST-70-TPM2.sh[2815]: Failed to encrypt device: Operation not supported
Fixes https://github.com/systemd/systemd/issues/38241
The new "varlinkctl --more StartTransient" subtest pipes a JSON-SEQ
stream of multiple records into "jq --seq -e ...". CentOS 9
ships jq 1.6, where -e only inspects the last input record's output:
when the trailing record (the final reply) doesn't match the
"select()" filter, jq exits non-zero even though earlier records
match, so the test fails.
Use --slurp which collapses the records into an array first and
returns a single bool.
Follow-up for 1cde1cc3ba
Introduce a counter that tracks how many configuration reloads have
been successfully completed by the manager. The increment lives in
manager_reload() right after the "point of no return", so failed
reload attempts that bail out earlier (e.g. during serialization)
do not bump the counter.
It is accessible as a new ReloadCount property to
org.freedesktop.systemd1.Manager (D-Bus) and ReloadCount to
io.systemd.Manager.Describe (Varlink).
Also add an integration test for ReloadCount
that verifies that the new ReloadCount property increments by one per
daemon-reload, accumulates correctly across multiple reloads, and that
D-Bus and Varlink return identical values. Also tests that the counter
reset after a reexec.
Co-developed-by: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: Simon Lucido <simonlucido@meta.com>
This maps from TOS, which can be used for setsockopt(IPPROTO_IP, IP_TOS),
to socket priority, which can be used for setsockopt(SOL_SOCKET, SO_PRIORITY).
With this, we can set priority like the following:
```
uint8_t tos = IPTOS_CLASS_CS6;
setsockopt_int(fd, IPPROTO_IP, IP_TOS, tos);
setsockopt_int(fd, SOL_SOCKET, SO_PRIORITY, tos_to_priority(tos));
```
Co-authored with Google Gemini.
The Hub for these headsets uses the following
USB entries:
Bus 007 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Bus 007 Device 003: ID 1038:1290 SteelSeries ApS Arctis Pro Wireless
Bus 007 Device 004: ID 1038:1294 SteelSeries ApS Arctis Pro Wireless
Turns out we can utilize this limit at a couple more places, so let's
move the previously defined limit constant to env-util.h and use it to
guard a couple more D-Bus methods. Also, bump it a bit, given it's meant
to be a safety cap that can't be hit in valid scenarios.
Follow-up for 7671b43cb8.
This adds "bootctl link" as alternative to kernel-install for installing
a UKI together with sidecards (confext, sysext, creds) as type 1
entries.
It has a much tigher focus than kernel-install, and doesn't do plugins
or anything.
It acts as "inverse" of the pre-existing "bootctl unlink".
Let's pick up all kinds of sidecars and show them, not just addons
This also fixes some issues regarding "root" directory handling.
In one context we'd resolve a directory claiming it was a "root", but it
wasn't.
Implements: https://github.com/uapi-group/specifications/pull/212
Among other things this changes tracking of the location of resources
during GC from using the BootEntrySource enum rather than a path, since
we have that and it is more efficient and easier to grok.
* 1302f123d9 Restrict wildcard for new files
* a6d0098d10 Install new files for upstream build
* ce07fd7616 d/t/boot-and-services: use coreutils tunable in apparmor test (LP: #2125614)
Extend io.systemd.CGroup.CpuUsage from a single per-unit nanosecond
counter to three rows distinguished by a "type" field of "total",
"user", or "system". The values come from cpu.stat's usage_usec,
user_usec and system_usec keys, read in a single keyed-attribute
fetch and cached on each CGroupInfo so each scrape only opens
cpu.stat once per cgroup.
I am really not a fan of full code lines passed to macros as parameters.
Let's get rid of the 3rd parameter of FOREACH_OPTION() hence:
1. Let's return errors just as a regular value (though a negative one),
that can be handled via a OPTION_ERROR case statement for the switch.
This normalizes handling of the error, just like any other event
returned by the option parser.
2. In order to avoid exploding the amount of boilerplate in each use
(that just propagates the error on OPTION_ERROR), let's then
introduce an explicit FOREACH_OPTION_OR_RETURN(), that returns from
the calling function on its own (and makes that clear in the name).
Together this cleans up, normalizes the logic and shortens the code.
Let's cap the number of question each query can have to something
reasonable - 128 questions per query should be more than enough for any
real-world scenario.
DEFINE_POINTER_ARRAY_CLEAR_FUNC() generates a helper of the form
helper_array_clear(T *array, size_t n) that drops each element but does
not free the array itself, parallel to DEFINE_POINTER_ARRAY_FREE_FUNC()
for cases where the array has automatic storage duration.
CLEANUP_ELEMENTS() pairs with these helpers to provide a _cleanup_-like
attribute for fixed-size arrays: the bound is taken from ELEMENTSOF(),
and the helper is invoked across the elements at scope exit. Compared to
CLEANUP_ARRAY(), the storage is neither freed nor zeroed.
Migrate various logic across the tree over to the new macros.
sd-device: use DEFINE_POINTER_ARRAY_CLEAR_FUNC() for sd_device_unref_array_clear()
Replace the local device_unref_many() helper with the macro-generated
equivalent.
format-table: switch help-table arrays to CLEANUP_ELEMENTS()
Generate table_unref_array_clear() via DEFINE_POINTER_ARRAY_CLEAR_FUNC()
and convert the help-table arrays in bootctl, cryptenroll, nspawn,
repart and vmspawn to CLEANUP_ELEMENTS(). The arrays no longer need a
trailing NULL slot, so the size matches ELEMENTSOF() of the groups
array.
firewall-util: switch netlink message arrays to CLEANUP_ELEMENTS()
Generate sd_netlink_message_unref_array_clear() via
DEFINE_POINTER_ARRAY_CLEAR_FUNC() in place of the NULL-terminated
sd_netlink_message_unref_many(), and convert the two stack arrays of
sd_netlink_message pointers to CLEANUP_ELEMENTS().
Small hygiene fix. r must be >= 0 as per the prior statement (otherwise we would have returned). This is really only going to be r == 0, which means return r; is return 0; I'm updating this to use log_debug_errno
When /proc is bind-mounted read-only (common in mock/Koji buildroots,
containers, and other sandboxed environments), opening
/proc/sys/fs/binfmt_misc returns ELOOP if it is an automount point
that cannot be triggered in the read-only context.
Currently binfmt_mounted_and_writable() only handles ENOENT, so ELOOP
propagates as an error. This causes test-binfmt-util to fail with
SIGABRT and disable_binfmt() to log a spurious warning at shutdown.
Treat ELOOP and EACCES the same as ENOENT: binfmt_misc is not usably
available, return false.
Note: PR #37006 (merged April 2025) addressed ELOOP in the xstatfsat()
path, but the open() call in binfmt_mounted_and_writable() remained
unhandled.
Fixes#38070
Frantisek Sumsal
Luca Boccassi
Valentin David
Zbigniew Jędrzejewski-Szmek
Lennart Poettering
Valentin David
dependabot[bot]
kakolla
Simon Lucido
Yu Watanabe
José Miguel Sarasola
Jim Spentzos
Yaping Li
Daan De Meyer
Dan Anderson
Samuel Dainard