This is work in progress and not finished yet. However, I hope to have
captured some of the key points that came up in previous discussions
with appropriate notes about things that still need to be defined.
I may revisit it later. Also, feel free to completely rewrite if the
format is not quite right.
In 1a29610f5f the change inadvertedly
disabled names with digit as the first character. This follow-up change
allows a digit as the first character in compat mode.
Fixes: #15141
When there are hundreds of mounts on the server, it will take a long
time to analyze the failure of a certain mount unit. So it is useful
to print the reason why unit_add_name() failed.
Add a simple check on the number of unit files that were found: return
`-ENOENT` when none is found from the function and thus `systemctl`
consequently exits with `1` (`EXIT_FAILURE`) if none were found.
Verification:
```bash
root@image:~# systemctl list-unit-files dbus-nonexistant.service; echo
$?
UNIT FILE STATE VENDOR PRESET
0 unit files listed.
1
root@image:~# systemctl list-unit-files dbus.service; echo $?
UNIT FILE STATE VENDOR PRESET
dbus.service static enabled
1 unit files listed.
0
```
Fixes#15082.
A common pattern in the codebase is reading a cgroup memory value
and converting it to a uint64_t. Let's make it a helper and refactor a
few places to use it so it's more concise.
Commit 08c588d18b moved attachment of the
sd-event into creation of the dhcp_client or ipv4ll in dhcp4_configure()
or ipv4ll_configure(), but these can also be created in link_load(),
so that creation needs to also perform sd-event attachment.
Without this, dhcp_client or ipv4ll created in link_load() will not have
an ->event and will fail assertion, causing networkd to fail, e.g.:
Assertion 'client->event' failed at src/libsystemd-network/sd-dhcp-client.c:1283, function client_start_delayed(). Ignoring.
ens2: Could not acquire DHCPv4 lease: Invalid argument
ens2: Failed
This may be not a popular setup, but in case kexec resides somewhere different
than the default location for KEXEC (`/usr/sbin/kexec`), don't just reboot and
try doing `reboot(RB_KEXEC)` instead, just like what `kexec -e` normally does.
```
❯ build/networkctl status veth99 ─╯
● 17: veth99
Link File: /usr/lib/systemd/network/99-default.link
Network File: /usr/lib/systemd/network/veth99.network
Type: ether
State: routable (configured)
Driver: veth
HW Address: 1e:04:f8:b8:2f:d4
MTU: 1500 (min: 68, max: 65535)
QDisc: noqueue
IPv6 Address Generation Mode: eui64
Queue Length (Tx/Rx): 1/1
Auto negotiation: no
Speed: 10Gbps
Duplex: full
Port: tp
Address: 192.168.5.35 (DHCP4)
fe80::1c04:f8ff:feb8:2fd4
Gateway: 192.168.5.1
DNS: 192.168.5.1
NTP: 192.168.5.1
SIP: 192.168.5.4
192.168.5.5
Time Zone: Europe/Berlin
Mar 21 23:26:32 Zeus systemd-networkd[671]: veth99: Link DOWN
Mar 21 23:26:32 Zeus systemd-networkd[671]: veth99: Lost carrier
Mar 22 10:25:35 Zeus systemd-networkd[671]: veth99: Link UP
Mar 22 10:25:35 Zeus systemd-networkd[671]: veth99: Gained carrier
Mar 22 10:25:36 Zeus systemd-networkd[671]: veth99: Gained IPv6LL
Mar 22 10:29:02 Zeus systemd-networkd[671]: veth99: Link DOWN
Mar 22 10:29:02 Zeus systemd-networkd[671]: veth99: Lost carrier
Mar 22 10:29:13 Zeus systemd-networkd[671]: veth99: Link UP
Mar 22 10:29:13 Zeus systemd-networkd[671]: veth99: Gained carrier
Mar 22 10:29:14 Zeus systemd-networkd[671]: veth99: Gained IPv6LL
```
In those functions where bus defaults to the m->bus, we should also
resolve the magic parameters. And if neither called with bus=NULL
and an unattached message, return properly instead of crashing in assert
later.
When starting a wayland session through a systemd service for a non-root
user, the compositor (based on wlroots) is denied the authorization to
change vt.
Once the user logs in, either through a local console or via ssh, the
compositor can work properly.
This is related to the login polkit policy:
- `allow_inactive` has value `auth_admin_keep`, denying any non-root
user session the authorization to change vt
- `allow_active` has value `yes`, which explains why the vt change
becomes possible once the user logs in through another channel
By changing the `allow_inactive` value to `yes`, any user session setup
in a service file can switch vt, allowing wayland sessions for non-root
users.
We used to log the following error:
"Start job for unit user-1000.slice failed with 'canceled'"
which can be really misleading if the actual job failed at *stopping* a unit.
Indeed "Start" was hard coded but it was wrong since we can also fail with stop
jobs which are enqueued when a session is stopped.
When specifying `DHCPv4.SendOption=`, it is used by systemd-networkd to
set the value of that option within the DHCP request that is sent out.
This differs to setting `DHCPServer.SendOption=`, which will place all
the options together as suboptions into the vendor-specific information
(code 43) option.
This commit adds two new config options, `DHCPv4.SendVendorOption=` and
`DHCPServer.SendVendorOption=`. These both have the behaviour of the old
`DHCPServer.SendOption=` flag, and set the value of the suboption in the
vendor-specific information option.
The behaviour of `DHCPServer.SendOption=` is then changed to reflect
that of `DHCPv4.SendOption=`. It will set the value of the corresponding
option in the DHCP request.
Susant Sahani
Benjamin Berg
Sean-StarLabs
Tom
Balint Reczey
Wen Yang
Zhu Li
Franck Bui
Pieter Lexis
Anita Zhang
Yuri Chornoivan
Zbigniew Jędrzejewski-Szmek
David Edmundson
Giedrius Statkevičius
Dan Streetman
pelzvieh
Arusekk
Vito Caputo
ml
Daan De Meyer
Finn
Arnaud Ferraris
David Wood