Now the MTU is not displayed. with this patch it's fixed.
(networkctl)⚡ % ./networkctl status enp0s31f6 ~/tt/networkctl/build
WARNING: systemd-networkd is not running, output will be incomplete.
● 4: enp0s31f6
Link File: /usr/lib/systemd/network/99-default.link
Network File: n/a
Type: ether
State: n/a (unmanaged)
Path: pci-0000:00:1f.6
Driver: e1000e
Vendor: Intel Corporation
Model: Ethernet Connection (2) I219-LM
HW Address: 8c:16:45:6c:83:b9 (LCFC(HeFei) Electronics Technology co., ltd)
MTU: 1500
This patch adds netdev ipvtap that is based on the
IP-VLAN network interface, called ipvtap. An ipvtap device can be created
in the same way as an ipvlan device, using 'kind ipvtap', and then accessed
using the tap user space interface.
```
May 10 11:08:54 test systemd-networkd[447]: wwan0: Failed to stop LLDP: Success
May 10 11:08:54 test systemd-networkd[447]: wwan0: Gained carrier
May 10 11:08:54 test systemd-networkd[447]: wwan0: Failed to start LLDP: Success
```
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.
When VXLAN destination port is unset and GPE is set
then assign 4790 to destination port. Kernel does the same as
well as iproute.
IANA VXLAN-GPE port is 4790
Fillup IFLA_INET6_ADDR_GEN_MODE while we do link_up.
Fixes the following error:
```
dummy-test: Could not bring up interface: Invalid argument
```
After reading the kernel code when we do a link up
```
net/core/rtnetlink.c
IFLA_AF_SPEC
af_ops->set_link_af(dev, af);
inet6_set_link_af
if (tb[IFLA_INET6_ADDR_GEN_MODE])
Here it looks for IFLA_INET6_ADDR_GEN_MODE
```
Since link up we didn't filling up that it's failing.
Closes#12504.
When there is bad link in the network the carrier goes up/down.
This makes networkd stops all the clients and drop config.
But if the remote router/dhcpserver running a prevention
of DHCP Starvation attack or DHCP Flood attack it does not allow
networkd to take a DHCP lease resulting failure in configuration.
This patch allows to keep the client running and keep the conf
also for this scenario.
Closes#9111
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/
networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/
Example conf:
/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
```
/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```
$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Now the setting MTU is embedded into the link_up message which makes it
incapable of setting MTU if link is up. MTU can be set while Link is up.
Closes#9254
sd_radv_stop is called from two places. if sd_radv_stop is alrady
success then just don't try to close it .
```
systemd-networkd[604]: RADV: Stopping IPv6 Router Advertisement daemon
systemd-networkd[604]: RADV: Unable to send last Router Advertisement with router lifetime set to zero: Bad file descriptor <==================HERE
systemd-networkd[604]: RADV: Updated prefix 2a0a:*:*:fc::/64 preferred 1h valid 2h
systemd-networkd[604]: RADV: Started IPv6 Router Advertisement daemon
```
Closes one of the issue #8960
This "netdevsim" as implied by the name is a tool for network developers and is a simulator.
This simulated networking device is used for testing various networking APIs and at this time
is particularly focused on testing hardware offloading related interfaces.
Test the "[Bridge]" section keys
```
[Bridge]
UnicastFlood=true
HairPin=true
UseBPDU=true
FastLeave=true
AllowPortToBeRoot=true
Cost=555
Priority=23
```
```
test_bridge_init (__main__.BridgeTest) ... ok
test_bridge_port_priority (__main__.BridgeTest) ... ok
test_bridge_port_priority_set_zero (__main__.BridgeTest)
It should be possible to set the bridge port priority to 0 ... ok
test_bridge_port_property (__main__.BridgeTest)
Test the "[Bridge]" section keys ... ok
```
This patch add support to enables to send User Class option code 77
RFC 3004.
This option MAY carry multiple User Classes.
The format of this option is as follows:
Code Len Value
+-----+-----+--------------------- . . . --+
| 77 | N | User Class Data ('Len' octets) |
+-----+-----+--------------------- . . . --+
where Value consists of one or more instances of User Class Data.
Each instance of User Class Data is formatted as follows:
UC_Len_i User_Class_Data_i
+--------+------------------------ . . . --+
| L_i | Opaque-Data ('UC_Len_i' octets) |
+--------+------------------------ . . . --+
UserClass=
A DHCPv4 client can use UserClass option to identify the type or category of user or applications
it represents. The information contained in this option is an string that represents the user class
of which the client is a member. Each class sets an identifying string of information to be used by the DHCP service to classify clients. Takes a whitespace-separated list.
UserClass= hello world how are you
Closes: RFC: #5134
Rather than choosing to set or unset any of these flag
use kernel defaults. This patch makes following properties to unset.
UseBPDU = unset
HairPin = unset
FastLeave = unset
AllowPortToBeRoot = unset
UnicastFlood = unset
In some situation if networkd fails to get the network file
then networkd crashes becasse the link->network is not initalized;
```
veth99: Failed to get network dhcp-client-ipv4-only: No such file or directory
Segmentation fault
gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /home/sus/tt/systemd/build/systemd-networkd
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
warning: Loadable section ".note.gnu.property" outside of ELF segments
warning: Loadable section ".note.gnu.property" outside of ELF segments
warning: Loadable section ".note.gnu.property" outside of ELF segments
Program received signal SIGSEGV, Segmentation fault.
link_load (link=0x55555582ccd0) at ../src/network/networkd-link.c:2973
2973 r = sd_dhcp_client_new(&link->dhcp_client, link->network->dhcp_anonymize);
(gdb) bt
(gdb) p link->network
$1 = (Network *) 0x0
(gdb) list
2968 if (r < 0) {
2969 log_link_debug_errno(link, r, "Failed to parse DHCPv4 address %s: %m", dhcp4_address);
2970 goto dhcp4_address_fail;
2971 }
2972
2973 r = sd_dhcp_client_new(&link->dhcp_client, link->network->dhcp_anonymize);
2974 if (r < 0)
2975 return log_link_error_errno(link, r, "Failed to create DHCPv4 client: %m");
2976
2977 r = sd_dhcp_client_set_request_address(link->dhcp_client, &address.in);
(gdb) r
```
Remote= must be a non multicast address. ip-link(8) says:
> remote IPADDR - specifies the unicast destination IP address to
> use in outgoing packets when the destination link layer address
> is not known in the VXLAN device forwarding database.
Closes#8088.
When there is a change in mac address we are not currently not changing
the MAC address and resulting v6 connectivity is gone.
When kernel reports a change in mac address change the MAC of ndisc
client too.
Closes # 7806
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
When the DHCP server returns both a Classless Static Routes
option and a Static Routes option, the DHCP client MUST ignore the
Static Routes option.
Closes#7792
commit 7715629 (networkd: Fix race condition in [RoutingPolicyRule] handling (#7615)).
Does not fix race. Still there is a race in case of bride because the
bride goes down and up .
calling route_configure then link_set_routing_policy_rule and the
link_check_ready makes a race between routing_policy_rule_messages and route_messages.
While bride comes up and we call the call again route_configure if finds
it self in the callback function LINK_STATE_CONFIGURED networkd dies.
Let's handle first routing policy rules then route_configure. This fixes
the crash.
Closes#7797
Init rule variable iif oif and to, from
While foreign rules are added the network part is not attached.
attach manager to rules and use it in routing_policy_rule_free.
Some devices get reset itself while setting the MTU. we get in to a LOOP .
Once the MTU changed then the DHCP client talking with DHCP server never stops.
networkd gets into a loop and generates endless DHCP requests.
fixes#6593fixes#7380
Similar to the virtual ethernet driver veth, vxcan implements a
local CAN traffic tunnel between two virtual CAN network devices.
When creating a vxcan, two vxcan devices are created as pair
When one end receives the packet it appears on its pair and vice
versa. The vxcan can be used for cross namespace communication.
According to RFC 3442:
If the DHCP server returns both a Classless Static Routes option and
a Router option, the DHCP client MUST ignore the Router option.
fixes#5695.
Susant Sahani
Susant Sahani
Susant Sahani