Otherwise we'll hit an assert sooner or later.
This requires us to initialize ->where even if we come back in "masked"
mode, as otherwise we don't know how to operate on the automount and
detach it.
Fixes: #5441
Detect the 'Detachable' dmi chassis type properly. Use the new
'convertible' chassis class of hostnamed, instead of returning the
generic 'computer' chassis class.
If the cryptsetup service unit and swap unit for a swap device
are not strictly ordered, it might happen that the swap unit
activates/mounts the swap device before its cryptsetup service unit
has a chance to run the 'mkswap' command (that it is programmed to).
This leads to the following error:
Starting Cryptography Setup for sda3_crypt...
[ OK ] Found device /dev/mapper/sda3_crypt.
Activating swap /dev/mapper/sda3_crypt...
[ OK ] Activated swap /dev/mapper/sda3_crypt.
[ OK ] Reached target Swap.
[FAILED] Failed to start Cryptography Setup for sda3_crypt.
See 'systemctl status systemd-cryptsetup@sda3_crypt.service' for
details.
[DEPEND] Dependency failed for Encrypted Volumes.
Which happens because the swap device is already mounted:
# systemctl status systemd-cryptsetup@sda3_crypt.service
<...>
Active: failed (Result: exit-code) since Mon 2017-02-27 14:21:43 CST;
54s ago
<...>
<...> systemd[1]: Starting Cryptography Setup for sda3_crypt...
<...> mkswap[2420]: mkswap: error: /dev/mapper/sda3_crypt is mounted;
will not make swapspace
<...>
So, modify cryptsetup-generator to include a 'Before=' option for the
respective 'dev-mapper-%i.swap' device in the cryptsetup service unit.
Now, correct ordering is ensured, and the error no longer occurs:
Starting Cryptography Setup for sda3_crypt...
[ OK ] Found device /dev/mapper/sda3_crypt.
[ OK ] Started Cryptography Setup for sda3_crypt.
Activating swap /dev/mapper/sda3_crypt...
[ OK ] Reached target Encrypted Volumes.
[ OK ] Activated swap /dev/mapper/sda3_crypt.
[ OK ] Reached target Swap.
Its necessary to specify the KVM PTP device name in userspace.
In case a network card with PTP device is assigned to the guest,
it might be the case that KVM PTP gets /dev/ptp0 instead of /dev/ptp1.
Fix a device name for the KVM PTP device.
Detect the 'Convertible' dmi chassis type properly. Use the new
'convertible' chassis class of hostnamed, instead of returning the
generic 'computer' chassis class.
Based on a patch by Jani Nikula <jani.nikula@intel.com>.
Add the 'convertible' type to the set of allowed chassis. This applies
to all devices that can be transformed by the user from laptop style to
tablet style.
This does not add any auto-detection, yet. It only makes 'set-chassis'
accept 'convertible' as valid input.
* Fix MIPS N64 and N32 LIB_ARCH_TUPLE
For mips, we have 3 major ABIs, they are N64, N32 and O32.
Both N32 and N64 defined __mips64__, and only N64 defined __LP64__.
GRE6 and IP6TNL address should be a IPv6.
fix :
```
Assertion 't->family == AF_INET6' failed at src/network/netdev/tunnel.c:170,
function netdev_ip6gre_fill_message_create(). Aborting.
```
With some UEFI shells LoadOptionsSize is reported being > 0
but the corresponding LoadOptions does not contain any data
(the first element has value 0).
When that happens, the stub feature that allows .cmdline to be
replaced by what's in LoadOptions ends up copying nothing/random
data to the kernel cmdline resulting in different kinds of boot
problems.
To fix this, add a check to see if LoadOptions contains data
before replacing the .cmdline.
Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Implement --since/--until (-S/-U) in the same fashion as journalctl.
This lets the user filter the results a bit so it would be easier to
find relevant info in case there were many core dumps.
This patch add supports to configure IFLA_VXLAN_LOCAL
and IFLA_VXLAN_GROUP.
The "Group" is renamed to "Remote" which is a multicast address.`
```
Description=vxlan-test
Name=vxlan1
Kind=vxlan
[VXLAN]
Id=33
Local=2001:db8:2f4:4bff:fa71:1a56
Remote=FF02:0:0:0:0:0:1:9
```
output
```
ip -d link show vxlan1
16: vxlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/ether fe:b4:97:03:f8:e5 brd ff:ff:ff:ff:ff:ff promiscuity 0
vxlan id 33 group ff02::1:9 local 2001:db8:02f4:4bff:fa71:1a56 dev enp0s3 srcport 0 0 dstport 8472 ageing 300 noudpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode none numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Let's just check the unified level, directly. There's really no value in
wrapping cg_unified_controllers() with this, i.e. potentially do string
comparison when there's no reason to.
Also, this makes the clal more alike cg_hybrid_unified().
We use our cgroup APIs in various contexts, including from our libraries
sd-login, sd-bus. As we don#t control those environments we can't rely
that the unified cgroup setup logic succeeds, and hence really shouldn't
assert on it.
This more or less reverts 415fc41cea.
Lennart Poettering
Martin Pitt
David Herrmann
Mauricio Faria de Oliveira
Susant Sahani
YunQiang Su
Susant Sahani
xTibor
Mikko Ylinen
AsciiWolf
Mark Stosberg
Zbigniew Jędrzejewski-Szmek
Mike Gilbert
Thomas H. P. Andersen
Giedrius Statkevičius