Instead of setting many small unreachable routes for each of the /64
subnets that were not distributed between the links requesting delegated
prefixes, set one unreachable route for the size of the delegated
prefix. Each subnet asssigned to a downstream link will add a routable
subnet for that link, and as the subnet assigned to the downstream link
has a longer prefix than the whole delegated prefix, the downstream
link subnet routes are preferred over the unroutable delegated one.
The unreachable route is not added when the delegated prefix is exactly
a /64 as the prefix size cannot be used to sort out the order of routing
into a bigger blocking subnet with the smaller /64 punching routable
"holes" into it.
When stopping the DHCPv6 client, the unroutable delegated prefix is
removed before the downstream link prefixes are unassigned.
Since we now have the possibility to request prefixes to be delegated
without corresponding IPv6 addresses, it does not make sense to store
lease T1 and T2 timeouts in the otherwise unused IA_NA structure.
Therefore lease timeouts T1 and T2 are moved to the DHCPv6 client
structure, as there will be only one set of stateful timeouts required
by RFC 7550, Section 4.3.
Select T1 and T2 timeouts based on whether addresses or prefixes were
requested and what the server offered. The address and prefix timeouts
values have been computed earlier when the relevant DHCPv6 options were
parsed.
Add function to fetch the IAID for the delegated IA_PD prefix. In
order to keep things simple in the implemntation, the same IAID
is used with IA_NA addresses and IA_PD prefixes. But the DHCPv6
server can choose to return only IA_PD prefixes, and the client
can nowadays omit requesting of IA_NA addresses. Since the function
fetching said IAID from the lease looks only for IA_NA ones, it
will return an empty IAID, which of course does not match the one
set for prefixes.
Fix this by adding a function returning the IAID for the prefix.
RFC 7084, WPD-4, requires Customer Edge end routers to behave
according to the following:
"WPD-4: By default, the IPv6 CE router MUST initiate DHCPv6 prefix
delegation when either the M or O flags are set to 1 in a
received Router Advertisement (RA) message. Behavior of the
CE router to use DHCPv6 prefix delegation when the CE router
has not received any RA or received an RA with the M and the
O bits set to zero is out of scope for this document."
Since it cannot be automatically detected whether DHCPv6 is to be
operated as an CE end router or whether to initiate an Informational
exchange to obtain other useful network information via DHCPv6 when the
Router Advertisement 'O' bit is set, a 'ForceDHCPv6PDOtherInformation'
boolean network configuration option in the '[DHCP]' section of a is
introduced. Setting this option causes DHCPv6 to be started in stateful
mode, although only the 'O' bit is seen in the Router Advertisement.
When 'ForceDHCPv6PDOtherInformation' is set and the Router Advertisement
has only the Other information 'O' bit set, disable requests for IA_NA
addresses.
Fixes#9745.
Add function to enable/disable IA_NA address requests. Internally
handle the request as a bit mask and add IA_PD prefix delegation
to the same bit mask instead of having a separate boolean. Thus
the calling code can set requests for prefix and address delegation
separately. This is handy when supporting RFC 7084.
Add a check in the code that at least something is requested from
the server in Managed mode. By default request IA_NA addresses from
the DHCPv6 server. Although a value has been defined for IA_TA,
temporay IA_TA addresses are not yet requested.
Add helper function for fetching enabled/disabled state of Prefix
Delegation for a DHCPv6 client. Update function setting prefix
delegation to use an int instead of a boolean.
Both 'systemd-hwdb update' and 'udevadm hwdb --update' creates hwdb
database. The database created by systemd-hwdb containes additional
information such that priority, line number, and source filename.
The unified function 'hwdb_update()' can take a flag 'compat' which
controls the format version of created database.
Several functions are shared by qsort and hash_ops or Prioq.
This makes these functions explicitly specify argument type,
and cast to __compar_fn_t where necessary.
Quoting https://github.com/systemd/systemd/issues/10074:
> detect_vm_uml() reads /proc/cpuinfo with read_full_file()
> read_full_file() has a file max limit size of READ_FULL_BYTES_MAX=(4U*1024U*1024U)
> Unfortunately, the size of my /proc/cpuinfo is bigger, approximately:
> echo $(( 4* $(cat /proc/cpuinfo | wc -c)))
> 9918072
> This causes read_full_file() to fail and the Condition test fallout.
Let's just read line by line until we find an intersting line. This also
helps if not running under UML, because we avoid reading as much data.
optind may be used in each verb, e.g., udevadm. So, let's initialize
optind before calling verbs.
Without this, e.g., udevadm -d hwdb --update causes error in parsing arguments.
Since the commit torvalds/linux@fdb5c4531c
the syscall BPF_PROG_ATTACH return EBADF when CONFIG_CGROUP_BPF is
turned off and as result the bpf_firewall_supported() returns the
incorrect value.
This commmit replaces the syscall BPF_PROG_ATTACH with BPF_PROG_DETACH
which is still work as expected.
Resolvesopenbmc/linux#159
See also systemd/systemd#7054
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Without this, log shows meaningless error message 'No anode', e.g.,
===
Failed to unshare the mount namespace: Operation not permitted
foo.service: Failed to set up mount namespacing: No anode
foo.service: Failed at step NAMESPACE spawning /usr/bin/test: No anode
===
Follow-up for 1beab8b0d0.
Both SO_SNDBUFFORCE and SO_RCVBUFFORCE requires capability 'net_admin'.
If this capability is not granted to the service the first attempt to increase
the recv/snd buffers (via sd_notify()) with SO_RCVBUFFORCE/SO_SNDBUFFORCE will
fail, even if the requested size is lower than the limit enforced by the
kernel.
If apparmor is used, the DENIED logs for net_admin will show up. These log
entries are seen as red warning light, because they could indicate that a
program has been hacked and tries to compromise the system.
It would be nicer if they can be avoided without giving services (relying on
sd_notify) net_admin capability or dropping DENIED logs for all such services
via their apparmor profile.
I'm not sure if sd_notify really needs to forcibly increase the buffer sizes,
but at least if the requested size is below the kernel limit, the capability
(hence the log entries) should be avoided.
Hence let's first ask politely for increasing the buffers and only if it fails
then ignore the kernel limit if we have sufficient privileges.
Followup to commit 13cf422e04b7 ("user@.service: don't kill user manager at runlevel switch")
I think there's a general rule that units with `StopWhenUnneeded=yes` need
`IgnoreOnIsolate=yes`... But it doesn't apply to `suspend.target` and friends.
`printer.target` and friends break on isolate even if we apply the rule[1].
That just leaves `graphical-session.target`, which is a user service.
"isolate" is *mostly* a weird attempt to emulate runlevels, so I decided
not to worry about it for user services.
[1] https://github.com/systemd/systemd/issues/6505#issuecomment-320644819
Patrik Flykt
Zbigniew Jędrzejewski-Szmek
Yu Watanabe
javitoom
Tony Novak
Alexander Filippov
Jon Ringle
Evgeny Vereshchagin
Franck Bui
Harshit Jain
Alan Jenkins
killermoehre