closes#6854
tcp-segmentation-offload: off
tx-tcp-segmentation: off
tx-tcp-ecn-segmentation: off [fixed]
tx-tcp-mangleid-segmentation: off
tx-tcp6-segmentation: off <==========================
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
Now we don't support tunnels to be created without a .network file
that is we need a interface index.
This work allows tunnel to be created without a ifindex.
Closes#6695
This work allows to configure device port:
tp — An Ethernet interface using Twisted-Pair cable as the medium.
aui — Attachment Unit Interface (AUI). Normally used with hubs.
bnc — An Ethernet interface using BNC connectors and co-axial cable.
mii — An Ethernet interface using a Media Independent Interface (MII).
fibre — An Ethernet interface using Optical Fibre as the medium.
This work based on Tom's original patch
teg@1312172
By setting GatewayOnlink=yes, the kernel will assume that the gateway is onlink
even if there is no route to it.
Resolves issue #1283.
GRE6 and IP6TNL address should be a IPv6.
fix :
```
Assertion 't->family == AF_INET6' failed at src/network/netdev/tunnel.c:170,
function netdev_ip6gre_fill_message_create(). Aborting.
```
As per commit 25e773e "udev: switch to systemd logging functions"
Now log_set_max_level() in udev_new() overwites system wide log level.
Propagate the udev.conf setting to log_set_max_level()
only if udev_new() is called from within udevd or one of its helpers.
Introduce a UDEV_PROPAGATE_LOG macro that we set with -D on
the gcc command line for all udev binaries we build, but not
for any others. The log_set_max_level() call is guarded by an
ifdef check for that macro, so that it only effects the various
udev binaries.
closes: #4525
active_slave:
Specifies the new active slave for modes that support it
(active-backup, balance-alb and balance-tlb).
primary slave:
systemd-networks currently lacks the capability to set the primary slave
in an
active-backup bonding. This is necessary if you prefer one interface
over the
other. A common example is a eth0-wlan0 bonding on a laptop where you'd
want to
switch to the wired connection whenever it's available.
Fixes: #2837
When we are in link_enter_configured we assume that the
link->state should be LINK_STATE_SETTING_ROUTES but in some
situation it's LINK_STATlE_SETTING_ADDRESSES.
Just ignore the wrong state.
Also since the return value not used any where
make link_enter_configured return type void.
Fixes: #4746
This patch adds support to remote checksum checksum offload to VXLAN.
This patch adds RemoteCheckSumTx and RemoteCheckSumRx vxlan configuration
to enable remote checksum offload for transmit and receive on the VXLAN tunnel.
Not every link has kind associated with it.
(gdb) r
Starting program: /home/sus/tt/systemd/systemd-networkd
Missing separate debuginfos, use: dnf debuginfo-install
glibc-2.23.1-7.fc24.x86_64
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
vboxnet0: Gained IPv6LL
wlp3s0: Gained IPv6LL
enp0s25: Gained IPv6LL
Enumeration completed
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff6e27ade in __strcmp_sse2_unaligned () from /lib64/libc.so.6
(gdb) bt
src/network/networkd-link.c:2008
src/network/networkd-link.c:2059
src/network/networkd-link.c:2442
m=0x555555704a30, userdata=0x55555570bfe0) at src/network/networkd-link.c:2497
at src/libsystemd/sd-netlink/sd-netlink.c:347
src/libsystemd/sd-netlink/sd-netlink.c:402
src/libsystemd/sd-netlink/sd-netlink.c:432
userdata=0x5555556f7470) at src/libsystemd/sd-netlink/sd-netlink.c:739
src/libsystemd/sd-event/sd-event.c:2275
src/libsystemd/sd-event/sd-event.c:2626
timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2685
bus=0x5555556f9af0, name=0x555555692315 "org.freedesktop.network1",
timeout=30000000,
check_idle=0x55555556ac84 <manager_check_idle>, userdata=0x5555556f6b20) at
src/shared/bus-util.c:134
src/network/networkd-manager.c:1128
src/network/networkd.c:127
(gdb) f 1
src/network/networkd-link.c:2008
2008 if (link->network->bridge || streq("bridge", link->kind)) {
(gdb) p link->kind
$1 = 0x0
systemctl --property doesn't validate if a requested property is valid or not,
and always returns with an exit code of 0, regardless of whether the requested
property exists or not.
How reproducible:
This works fine:
Id=multi-user.target
But put in a non-existing property:
Id=default.targets.service
Id=default.targets.service
0
[root@shou18lkvm8 ~]# systemctl show --property Id this.is.rubbish; echo $?
Id=this.is.rubbish.service
0
After:
sus@maximus bz-95593]$ ./systemctl show --property Id this.is.rubbish; echo $?
Can't display property this.is.rubbish. Unit this.is.rubbish.service does not
exist.
4
fixes#2295
Before:
[sus@maximus bz-1256858]$ systemctl status rsyslog.service;echo $?
● rsyslog.service - System Logging Service
Loaded: loaded (/usr/lib/systemd/system/rsyslog.service; enabled; vendor
preset: enabled)
Drop-In: /etc/systemd/system/rsyslog.service.d
└─50-CPUShares.conf
Active: inactive (dead) since Mon 2016-05-30 11:54:25 IST; 2h 26min ago
Docs: man:rsyslogd(8)
http://www.rsyslog.com/doc/
Process: 1159 ExecStart=/usr/sbin/rsyslogd -n $SYSLOGD_OPTIONS (code=exited,
status=0/SUCCESS)
Main PID: 1159 (code=exited, status=0/SUCCESS)
May 30 11:07:50 maximus systemd[1]: Starting System Logging Service...
May 30 11:07:50 maximus systemd[1]: Started System Logging Service.
May 30 11:54:25 maximus systemd[1]: Stopping System Logging Service...
May 30 11:54:25 maximus systemd[1]: Stopped System Logging Service.
3
[sus@maximus bz-1256858]$ systemctl status hello.service;echo $?
● hello.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
3
After:
$ ./systemctl status hello.service;echo $?
Failed to dump process list, ignoring: Access denied
● hello.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
4
[sus@maximus bz-1256858]$ ./systemctl status rsyslog.service;echo $?
Failed to dump process list, ignoring: Access denied
● rsyslog.service - System Logging Service
Loaded: loaded (/usr/lib/systemd/system/rsyslog.service; enabled; vendor
preset: enabled)
Drop-In: /etc/systemd/system/rsyslog.service.d
└─50-CPUShares.conf
Active: inactive (dead) since Mon 2016-05-30 11:54:25 IST; 2h 24min ago
Docs: man:rsyslogd(8)
http://www.rsyslog.com/doc/
Process: 1159 ExecStart=/usr/sbin/rsyslogd -n $SYSLOGD_OPTIONS (code=exited,
status=0/SUCCESS)
Main PID: 1159 (code=exited, status=0/SUCCESS)
May 30 11:07:50 maximus systemd[1]: Starting System Logging Service...
May 30 11:07:50 maximus systemd[1]: Started System Logging Service.
May 30 11:54:25 maximus systemd[1]: Stopping System Logging Service...
May 30 11:54:25 maximus systemd[1]: Stopped System Logging Service.
3
Fixes: 1092
From the issue #2004 we are receiving packet even if this
packet is not intended for this interface.
This can be reproduced.
lp3s0: Updating address: 2001:db8:1:0:7e7a:91ff:fe6d:ffe2/64 (valid for 1d)
wlp3s0: Updating address: fe80::7e7a:91ff:fe6d:ffe2/64 (valid forever)
NDisc CLIENT: Received RA from non-link-local address ::. Ignoring.
NDisc CLIENT: Received RA on wrong interface: 2 != 6. Ignoring.
NDisc CLIENT: Received RA on wrong interface: 2 != 3. Ignoring.
enp0s25: Updating address: 2001:db8:1:0:2ad2:44ff:fe6a:ae07/64 (valid for 1d)
enp0s25: Updating address: fe80::2ad2:44ff:fe6a:ae07/64 (valid forever)
NDisc CLIENT: Sent Router Solicitation
NDisc CLIENT: Sent Router Solicitation
NDisc CLIENT: Sent Router Solicitation
NDisc CLIENT: Received RA on wrong interface: 3 != 2. Ignoring.
NDisc CLIENT: Received RA on wrong interface: 3 != 6. Ignoring.
NDisc CLIENT: Received RA from non-link-local address ::. Ignoring.
NDisc CLIENT: Received RA on wrong interface: 2 != 6. Ignoring.
NDisc CLIENT: Received RA on wrong interface: 2 != 3. Ignoring.
enp0s25: Updating address: 2001:db8:1:0:2ad2:44ff:fe6a:ae07/64 (valid for 1d)
enp0s25: Updating address: fe80::2ad2:44ff:fe6a:ae07/64 (valid forever)
Add SO_BINDTODEVICE to socket
fixes#2004
This is partial fix for #2228 and #2977, #3204.
bridge-test: netdev ready
docker0: Gained IPv6LL
wlan0: Gained IPv6LL
eth0: Gained IPv6LL
Enumeration completed
bridge-test: netdev exists, using existing without changing its
parameters
vboxnet0: IPv6 enabled for interface: Success
lo: Configured
docker0: Could not drop address: No such process
vboxnet0: Gained carrier
wlan0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
vboxnet0: Gained IPv6LL
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
[New Thread 0x7ffff6505700 (LWP 1111)]
[Thread 0x7ffff6505700 (LWP 1111) exited]
Assertion 'link->state == LINK_STATE_SETTING_ROUTES' failed at
src/network/networkd-link.c:672, function link_enter_configured().
Aborting.
Program received signal SIGABRT, Aborted.
0x00007ffff6dc6a98 in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: dnf debuginfo-install
iptables-1.4.21-15.fc23.x86_64 libattr-2.4.47-14.fc23.x86_64
libidn-1.32-1.fc23.x86_64 pcre-8.38-7.fc23.x86_64
Debugging
(gdb) bt
"link->state == LINK_STATE_SETTING_ROUTES", file=0x5555556a34c8
"src/network/networkd-link.c", line=672,
func=0x5555556a56d0 <__PRETTY_FUNCTION__.14850>
"link_enter_configured") at src/basic/log.c:788
src/network/networkd-link.c:672
src/network/networkd-link.c:720
flags=0 '\000', scope=0 '\000', cinfo=0x7fffffffe020) at
src/network/networkd-address.c:344
(rtnl=0x5555556eded0, message=0x55555570ff20, userdata=0x5555556ec590)
at src/network/networkd-manager.c:604
m=0x55555570ff20) at src/libsystemd/sd-netlink/sd-netlink.c:365
at src/libsystemd/sd-netlink/sd-netlink.c:395
ret=0x0) at src/libsystemd/sd-netlink/sd-netlink.c:429
revents=1, userdata=0x5555556eded0) at
src/libsystemd/sd-netlink/sd-netlink.c:723
src/libsystemd/sd-event/sd-event.c:2268
src/libsystemd/sd-event/sd-event.c:2629
timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2688
bus=0x5555556eeba0, name=0x55555568a2f5 "org.freedesktop.network1",
timeout=30000000,
check_idle=0x55555556adb6 <manager_check_idle>,
userdata=0x5555556ec590) at src/shared/bus-util.c:134
src/network/networkd-manager.c:1130
src/network/networkd.c:127
(gdb) f 3
src/network/networkd-link.c:672
672 assert(link->state == LINK_STATE_SETTING_ROUTES);
(gdb) p link->state
$1 = LINK_STATE_FAILED
We should not be in this state .
even if vboxnet0 failed we went into this state.
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
While creating a VLAN the mac address should be copied from the parent interface, so that
the VLANs inherit the MAC address of the physical interface.
Before:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
6: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 22:07:73:9d:43:59 brd ff:ff:ff:ff:ff:ff
7: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 46:30:76:33:35:d4 brd ff:ff:ff:ff:ff:ff
```
After:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
11: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
12: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
```
v2 of #1573, with fixed commit message.
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
it can change the multicast snooping value.
IGMP snooping monitors the Internet Group Management Protocol (IGMP)
traffic between hosts and multicast routers.
If we not marking manager dirty when link is dirty then
the state file is not updated. This is a side effect of
issue 2850
setting CriticalConnection=yes
timesyncd NTP servers given by DHCP server are ignored.
IPv6 protocol requires a minimum MTU of 1280 bytes on the interface.
This fixes#3046.
Introduce helper link_ipv6_enabled() to figure out whether IPV6 is enabled.
Introduce network_has_static_ipv6_addresses() to find out if any static
ipv6 address configured.
If IPv6 is not configured on any interface that is SLAAC, DHCPv6 and static
IPv6 addresses not configured, then IPv6 will be automatically disabled for that
interface, that is we write "1" to /proc/sys/net/ipv6/conf//disable_ipv6.
Susant Sahani