Let's try to recognize paths (i.e. those with a "/") as source for
credentials to load, and then read them from the file system. Also, only read
credentials from an inbound credentials directory if the source
qualifies as valid credential name.
Otherwise print a nice error.
We must check the return value of GREEDY_REALLOC for OOM, and the
pointer are updated already on success, hence it's a bad idea to make a
copy of the pointer beforehand.
Let's disable ECHOPRT for terminals we reset.
The feature only really makes sense for hardcopy terminals and we sure
as shit don't talk to one of those. It has the effect that when line
editing is on and you hit backspace it outputs "\" followed by the
removed character. This never makes sense on a TTY that can just erase
the character.
Hence turn of this flag.
We have carried this flag along for about forever, but it doesn't really
make sense. I guess we mostly tested the terminal reset stuff for output
only, not for input.
This change is in particular useful for tools such as
"systemd-firstboot" which interactively ask questions on the console,
and where line editing should really work.
The logic is taken from dump ratelimit: if the config changes, we discard the
counters. This allows the user apply new limits and "start from scratch" in
that case.
This actually makes StartLimitIntervalSec=infinity (or with a large interval)
work as expected, because the counter is maintained even if daemon-reload
operations are interleaved.
* Update 60-autosuspend.hwdb
Framework provides expansion cards. For the HDMI and DisplayPort, these benefit power management via enabling auto suspend.
We have not tested if the settings actually filter DHCP servers.
Let's add a test case for the settings.
Note, the .network file used here has been unused since
0730e3767d. So, we can freely reuse it
without changing other test cases.
Closes#30107.
AllowList= and DenyList= filter only DHCPOFFER messages. So, if
RapidCommit= is enabled, then networkd unconditionally accepts a rapid
ACK message even if its sender is filtered out by the lists.
As AllowList=/DenyList= implemented earlier than RapidCommit=, so
enabling RapidCommit= unconditionally by default may break existing
setups that use AllowList=/DenyList=.
Let's disable RapidCommit= by default when AllowList=/DenyList= is
enabled. Still the setting can be enabled by setting explicitly even
AllowList=/DenyList= is also specified.
We generally want to avoid to include dashes in json field names. We
historically made a mistake there which is hard to fix. But for new
fields, let's get this right. We already got it right for a bunch of new
fields, hence also make sure to use underscores rather dashes for new
additions.
This field was added post v254, and since we didn't release since then,
let's just rename it.
Currently translated at 37.0% (84 of 227 strings)
po: Translated using Weblate (Hebrew)
Currently translated at 15.8% (36 of 227 strings)
po: Added translation using Weblate (Hebrew)
Co-authored-by: Yaron Shahrabani <sh.yaron@gmail.com>
Translate-URL: https://translate.fedoraproject.org/projects/systemd/master/he/
Translation: systemd/main
When we resolve symlinks, paths (especially filenames) may be changed,
but plugins may expect to see the kernel added under the name specified,
not under the final name that the symlink chain resolves to.
This makes symlinks in specified paths that passed to plugins are not
resolved when neither --root nor --image specified.
Fixes#29317.
* systemd.pc: Keep support for rootprefix and root_prefix
We dropped support for split-usr in https://github.com/systemd/systemd/commit/b0d3095fd6cc1791a38f57a1982116b4475244ba
but kept the `rootprefix` variable in meson but ignore it to make sure we do
not break downstream builds that depend on systemd.
This is fine because we had logic in our meson.build that rootprefix and prefix need to be the
same when split-usr=false.
However we never had this logic in our systemd.pc.in file. This leads to a nasty breaking problem
downstream. Many packages [0,1,2] (there might be more!) rely on overriding rootprefix or root_prefix when calling pkg-config to configure where
to install systemd units. This is because before split-usr we installed units in rootprefix. Setting prefix
on the pkg-config file didn't work. Even when split-usr=false people had to set rootprefix to install units
in the right position.
E.g. they have a line like:
systemdunitdir = systemd.get_variable(pkgconfig: 'systemdsystemunitdir', pkgconfig_define: ['rootprefix', systemd_root_prefix])
With https://github.com/systemd/systemd/commit/b0d3095fd6cc1791a38f57a1982116b4475244ba landing
This would mean all these downstream packages need to be patched to use `prefix` next to `rootprefix`.
(Both need to be kept to keep backwards compat with using older versions of systemd).
This puts a big burden on downstream packages.
Instead we should not break the existing behaviour and keep the old behaviour of systemd.pc.in around.
I've changed systemd.pc.in such that either setting prefix, rootprefix or root_prefix will all have
the same effect. This way we do not break any downstream packages.
- [0](https://github.com/fwupd/fwupd/blob/caa788b37ff34334d83debb047335fd12f3a7836/meson.build#L464)
- [1](https://gitlab.freedesktop.org/mobile-broadband/ModemManager/-/blame/main/meson.build#L204)
- [2](https://github.com/PipeWire/pipewire/blob/49cdb468c28ba366dbd08eef9cb6dbf2dea2a2e5/src/daemon/systemd/system/meson.build#L1)
Systemd 255 changed the semantic of MemoryAvailable with 3565c709f5 ("cgroup:
Fix MemoryAvailable= by considering physical memory"). If there is no
artificial constraint, it will hold the amount of available physical memory,
while it previously contained UINT64_MAX.
While the change in MemoryAvailable's semantic is sensible, it causes
`systemctl status` to always display the available physical memory. This
creates a lot of noise, especially since systemd recently started to also show
the "peak" memory. For example
$ systemctl status foo
…
Memory: 3.9G (available: 21.2G peak: 5.4G)
…
However, while peak memory is a unit specific value, the available memory, when
not derived from artificial memory limits, is a generic property that holds the
same value for all units that are not under memory accounting
constraints. Displaying it under those circumstances can therefore be
considered being noisy.
Before 3565c709f5 ("cgroup: Fix MemoryAvailable= by considering physical
memory") "systemctl status" would only show the available memory if it was
caused by a explicit memory limitation due to MemoryHigh or MemoryMax.
This commit restores this behavior by supressing displaying the available
memory if is is merely the available phyiscal memory. For example
$ systemctl status foo
…
Memory: 3.9G (peak: 5.4G)
…
Fixes#30102.
Let's utilize the full power of Packit and run some tests with the just
built RPMs. This makes use of the Fedora infrastructure provided by
the Testing Farm project [0][1].
With the current configuration, the `tests` job runs tests from the
Fedora tests repository [2] in a very similar fashion like Ubuntu CI
does, just with different metadata all around it. ATTOW there are only
two tests, which are wrappers around unit tests and integration tests;
the latter one currently runs only nspawn-based tests, since there's no
KVM on the test VMs, and, for now, I'd like to see how well the infra is
going to manage our upstream traffic and how stable the whole thing is
end up being before increasing the work load.
[0] https://docs.testing-farm.io/Testing%20Farm/0.1/index.html
[1] https://packit.dev/docs/configuration/upstream/tests
[2] https://src.fedoraproject.org/tests/systemd
I'm pretty sure this is not the only case, but it's the one I recently
noticed. Even though we call ddebug() from a function, that function is
called before ddebug() is defined, resulting in the same issue as if we
called just ddebug() in its place, i.e.:
..//test-functions: line 276: ddebug: command not found
Luca Boccassi
Lennart Poettering
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Yaron Shahrabani
linuxlion
Nils K
Frantisek Sumsal
Arian van Putten
Florian Schmaus