Add a small newc-format cpio encoder that builds an archive with each
credential as a file under .extra/system_credentials/<id>.cred and
writes it to a temp file. This mirrors what systemd-stub produces from
ESP credentials, so PID1's import_credentials_boot() picks them up
unchanged via the new /.extra/system_credentials/ initrd path.
Motivated by vmspawn under SEV-SNP, where SMBIOS credentials aren't
covered by the launch measurement and are discarded by PID1 in
confidential guests, so they must be delivered via the measured initrd
instead. The writer lives in src/shared/ so other host-side tooling
can reuse it.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
PID1's import_credentials_boot() so far always treated initrd-delivered
credentials as untrusted: anything found under /.extra/credentials/
was routed into ENCRYPTED_CREDENTIALS_DIRECTORY, forcing consumers to
use LoadCredentialEncrypted= and provide credentials in systemd-creds
encrypted form. That matches the trust model for stub which sources
credentials from the EFI System Partition (mountable and editable
offline).
Host-side producers that take responsibility for the trust of the cpio
they hand to the kernel have a different model: e.g. systemd-vmspawn
builds an initrd-credentials cpio whose bytes are covered by the SEV-SNP
launch measurement via QEMU's kernel-hashes=on (or, in non-confidential
setups, by the host itself being the trust root). Forcing those through
the @encrypted bucket would require null-key wrapping on the host and
LoadCredentialEncrypted= on the consumer side, a needless API split for
unit files that should otherwise be portable between confidential and
non-confidential boots.
Extend import_credentials_boot() to import credentials from
/.extra/system_credentials/, routed into SYSTEM_CREDENTIALS_DIRECTORY.
Consumers access these via LoadCredential= directly, with no
encrypted-credential ceremony.
The per-directory walk is hoisted into a small static helper so the new
target bucket can share the existing copy/validation logic; behavior
for the existing untrusted paths is unchanged.
Also set the new RECURSE_DIR_MUST_BE_REGULAR flag as a drive-by.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
Add tsm_report_acquire(), a thin wrapper around the kernel's
/sys/kernel/config/tsm/report/ configfs interface for fetching a
confidential-computing attestation report (SEV-SNP, TDX, ...), including
a caller supplied input.
A report signing backend that returns a confidential-computing
attestation report obtained via configfs-tsm. Implements
io.systemd.Report.Signer.Sign(): embeds the digest as the report's
inblob and returns the outblob (plus provider and any aux/manifest
blobs). Wired up as the "tsm" mechanism with a socket-activated service.
Currently only a single job for a single unit can be enqueued
atomically,
so there is no guarantee that, e.g., starting a unit and its socket
at the same time will happen in the same transaction. That forces
callers to 'know' the right order in which to start new units being
installed, or failures will occur. It also means some ordering
constraints are ignored, in case the separate calls are done
in the wrong manual order.
Add a new EnqueueUnitJobMany() D-Bus method that takes a list of units
to start.
min_free is supposed to track the minimum free space across all home
directories to scale the next rebalance interval. However, it was
incorrectly assigned h->rebalance_size (the home's current total
allocation) instead of new_free (the remaining allocatable space).
This caused the rebalance interval to be computed from allocation sizes
rather than free space, so a nearly-full home would not trigger the
shorter intervals it should, delaying response to low-space conditions.
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
Currently the partition list is ordered like this: First come the
partitions that exist as definition files (could be pre-existing
partitions or could be new ones), then come the pre-existing partitions
that aren't matched to a definition file.
This ordering is visible to the user when we print our partition table,
and it doesn't really make sense from a UX perspective: Partition tables
are usually either presented in order of the partition indices, or in
order of the partition offsets. Arguably the latter would be nicer here,
since the visualization below is already ordered by physical offsets.
So reorder the list after we assigned the new partitions to their
respective free areas, according to the physical offset (or, for
partitions to newly create, the order that we will allocate them in).
Another potential upside of this is that we could rely on the partition
order in the code now more, too.
To ensure it keeps working, also add a test in the integration tests for
it.
Screenshot before:
<img width="2853" height="686" alt="Screenshot From 2026-06-05 00-58-07"
src="https://github.com/user-attachments/assets/7f24b527-7d79-49c4-916b-52faa892d4eb"
/>
Screenshot after:
<img width="2853" height="686" alt="Screenshot From 2026-06-05 00-58-16"
src="https://github.com/user-attachments/assets/4505ec5e-cab4-4ac1-95f0-b5af3991509e"
/>
Convert the --help text of systemd-imds and systemd-imdsd to the common
help_cmdline()/help_abstract()/help_section()/help_man_page_reference()
helpers, for a uniform output style across tools.
When systemd-imds is invoked as a Varlink service (via the new
systemd-imds-metrics.socket), it now acts as an io.systemd.Metrics
provider for systemd-report. It connects to systemd-imdsd over the
existing io.systemd.InstanceMetadata interface to acquire the real
data and re-exposes the detected cloud vendor plus the well-known
hostname, region, zone and public IPv4/IPv6 fields as metrics in the
io.systemd.InstanceMetadata.* namespace.
The metrics logic lives entirely on the client side
(imds-tool-metrics.c); systemd-imdsd is unchanged. Each metric is
acquired on demand with a blocking call to the daemon, benefiting from
its local cache. Fields that are unset or unsupported by the vendor are
simply omitted.
The metrics socket is statically enabled into sockets.target.wants/.
- Pass colon+1 (port string) instead of s (hostname) to safe_atou16,
so host:port registries are no longer always rejected.
- Switch to safe_atou16_full() with base-10 and strict flags to reject
non-decimal port forms (hex, octal, leading whitespace, sign prefix)
that would produce malformed URL authorities.
- Reject empty host explicitly via isempty() guard (covers both NULL
and empty-string input), and guard colon == n to reject ':port' form,
since dns_name_is_valid('') == 1 (DNS root) would otherwise accept
empty host as valid.
- Wrap overlong line to fit 109-column limit.
- Add test coverage for oci_registry_is_valid().
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
Currently `systemd-ssh-generator` supports
`systemd.ssh_listen=vsock::22` and aliases the "empty CID" towards
`VMADDR_CID_ANY`. VMADDR_CID_ANY is -1, so it's confusing from a user
experience that `systemd.ssh_listen=vsock:-1:22` isn't supported.
A report signing backend that returns a confidential-computing
attestation report obtained via configfs-tsm. Implements
io.systemd.Report.Signer.Sign(): embeds the digest as the report's
inblob and returns the outblob (plus provider and any aux/manifest
blobs). Wired up as the "tsm" mechanism with a socket-activated service.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
Add tsm_report_acquire(), a thin wrapper around the kernel's
/sys/kernel/config/tsm/report/ configfs interface for fetching a
confidential-computing attestation report (SEV-SNP, TDX, ...), including
a caller supplied input.
Signed-off-by: Paul Meyer <katexochen0@gmail.com>
Allow systemd-executor to be compiled into a single binary.
The existing -Dlink-executor-shared=true|false is extended to also
allow -Dlink-executor-shared=single (*). The new mode is opt-in,
to allow experimentation and introduce this smoothly.
This saves a little space, but not as much as I expected:
$ ls -l build/{systemd,systemd-executor} build-new/systemd
-rwxr-xr-x 1 zbyszek zbyszek 631520 May 25 22:44 build/systemd
-rwxr-xr-x 1 zbyszek zbyszek 670464 May 25 22:44 build/systemd-executor
-rwxr-xr-x 1 zbyszek zbyszek 1214488 May 25 22:45 build-new/systemd
(This is with -Dbuildtype=debugoptimized -Db_lto=true).
The combined binary is slightly smaller than the sum of the separate
ones, but not much. In both cases, the binaries are linked to
libsystemd-core which is 10MB, so the size of the binaries themselves
doesn't make much of a difference. The executor needs exec-invoke.c
which is huge and not shared with anything else.
Longer term, I want to allow systemd to be linked statically. In
that case, having systemd-executor separate would be very painful.
So the option to use a multicall binary will be necessary.
Previously, we stored the resolved path to systemd-executor and
used it argv[0]. I don't think this was useful. After all, normally
we would use the non-resolved original path as argv[0]. So that
part is dropped, and the resolved path is only logged, but
"systemd-executor" is always used as argv[0]. This makes the
multicall binary work reliably, no matter what the actual file
name is.
(*) This means that compat as the commandline level is maintained:
'meson setup build -Dlink-executor-shared=true …' works as before.
Unfortunately, when using an existing build directory, meson chokes
on the type change and refuses to reconfigure the directory or change
the option or do anything useful. I think meson is DTWT here, but
this is hard to fix. So the build directory probably needs to be
recreated.
Transfer files might come and go, components might be enabled and
disabled. Patterns might change. Let's keep track of what we install, so
that we can automatically gc everything no longer owned by any enabled
transfer.
This is a minor extension, to move the machine tags concept more closely
towards what higher-level solutions support for tagging machines, such
as kubernetes, simply to reduce the conceptual impedance mismatch.
Currently they are marked as required, as resolved aborts on startup if
dns-over-tls is built in, even if it is not enabled in the config.
Change initialization to be done lazily on first use, so that if the
config is not enabled, it never runs, and the libraries are never
dlopened, so they can be downgraded to recommends.
Closes#42693. Specifiers are now expanded in symlink targets
(previously, they were only expanded in the source) - this is
technically a breaking change, but I'd be very surprised if anyone was
relying on this.
No other simplification is applied to the target (unlike the source,
which goes through `path_simplify_and_warn`).
Also a few minor changes:
- rename local `path` variable to `source` to match documentation
convention
- document that `MakeSymlinks=` accepts specifiers
- fix error message to print `MakeSymlinks=` option instead of
`Subvolumes=`
kexec-tools has a --reuse-cmdline option which is very convenient
when doing a lot of reboots, add the same to systemctl.
Dedup options, letting the last one wins in case of duplicates,
so that 'systemctl kexec --reuse-cmdline' can be chained many times
without continuosly expanding the cmdline with duplicates from
the boot entry.
Let's make sure we keep track of any file we drop into the system via a
database in /var/. This database is implemented based on symlinks, i.e.
reuses the fs as a simple database. Given the database most likely will
have <= 10 entries only (as we store *patterns* of installed file paths in
them, not the file paths themselves), this should be very efficient.
For implementation details see comments at top of
src/sysupdate/sysupdate-cleanup.c.
Just some refactoring.
The code is slightly updated, for example it now uses string_is_safe().
But mostly this just splits out code from one large file to a smaller
one.
Whenever we are validating a string that shall appear in a filename
eventually we want to use filename_part_is_valid() rather than file
filename_is_valid(). Let's add explicit support for that to
string_is_safe(), since it's actually a really common case.
At various places we filter directory enumerations by inode type. Let's
add explicit support for that, so that the "struct dirent" array we
return already suppresses them.
This shortens code and makes things more robust.
Currently only a single job for a single unit can be enqueued atomically,
so there is no guarantee that, e.g., starting a unit and its socket
at the same time will happen in the same transaction. That forces
callers to 'know' the right order in which to start new units being
installed, or failures will occur. It also means some ordering
constraints are ignored, in case the separate calls are done
in the wrong manual order.
Add a new EnqueueUnitJobMany() D-Bus method that takes a list of units
to start.
Fixes https://github.com/systemd/systemd/issues/8102
Co-authored-by: Michal Koutný <mkoutny@suse.com>
Without CAP_SYS_ADMIN and without the 'user_subvol_rm_allowed' mount
option, BTRFS_IOC_SNAP_DESTROY is rejected with EPERM (or EROFS for a
read-only subvolume), so rm_rf_subvolume() left subvolumes behind.
test-btrfs thus accumulated leftover subvolumes in /var/tmp on every
unprivileged run on a btrfs filesystem.
An unprivileged owner can however clear the RDONLY flag, empty a
subvolume and rmdir() it. So clear the RDONLY flag on EPERM/EACCES too
(not just EROFS) to leave the subvolume writable, and let rm_rf() fall
through on EPERM/EACCES to empty the subvolume recursively and rmdir()
it, matching what rm_rf_at() already did.
Fixes https://github.com/systemd/systemd/issues/42674
hashmap_replace() failure left t in s->manager->dns_transactions with
t->scope still NULL, causing the destructor to skip hashmap_remove().
Add the missing cleanup mirroring the earlier error path in the same
function.
Signed-off-by: dongshengyuan <dongshengyuan@uniontech.com>
Currently they are marked as required, as resolved aborts on startup if
dns-over-tls is built in, even if it is not enabled in the config.
Change initialization to be done lazily on first use, so that if the
config is not enabled, it never runs, and the libraries are never
dlopened, so they can be downgraded to recommends.
Let's translate openssl's errors to proper errnos
where we can instead of returning EIO for everything.
Let's also make log_openssl_errors() public so we can
use it everywhere and migrate the rest of the codebase
to use it.
Two fixes to get this byte-stable:
- `fd_copy_directory()` was using `FOREACH_DIRENT_ALL`, which doesn't
give stable ordering. Read all paths, sort, then iterate.
- `mcopy -s` depends on `readdir()` ordering and thus isn't
reproducible. Implement the recursion/sorting here and only invoke
mcopy/mmd per dir.
First change increases memory usage, as we don't stream the paths
anymore, second increases the number of context switches when invoking
external tools. Both should be fine given the ESP content should usually
be pretty limited.
I'd like to write a test for this, but didn't come up with a way that
doesn't require privileges and would surface the error reliably.
The TPM2_NV_Read commands returns the requested data in a
TPM2B_MAX_NV_BUFFER type, the maximum size of which is TPM-specific and
can be determined by querying the value of the TPM_PT_NV_BUFFER_MAX
property.
The value of this may be smaller than the payload size of some NV
indexes, particularly when that payload is a X509 certificate with a RSA
public key. Eg, the manufacturer supplied RSA EK certificate on my own
machine has a size of 1035 bytes, and the value of TPM_PT_NV_BUFFER_MAX
is 1024.
To handle this case and make it possible to read any EK certificate from
the TPM, make tpm2_read_nv_index support chunked reads when the payload
size is larger than what the TPM can return in a single command.
OpenSSL 4 broke ABI, so we need to look for both SONAMEs.
Try libssl.so.3 first, and fallback to libssl.so.4,
so that the older and more stable version is used if both
are installed, giving distros time to fix regressions.
Follow-up for ccdd42351f
Fixes https://github.com/systemd/systemd/issues/42675
This is a bit of an RFC (but I hope I got it mostly right), @daandemeyer
suggested in
https://github.com/systemd/systemd/pull/42161#pullrequestreview-4336323314
to improve the abstractions around the Exec= in
io.systemd.Unit.StartTransient as we will add a bunch more of those. So
this PR adds first a better abstraction and then uses it. See the
individual commits for details.
Paul Meyer
Lennart Poettering
Luca Boccassi
dongshengyuan
Gabriel
Fedora Weblate user 1831
김인수
Zbigniew Jędrzejewski-Szmek
Luca BoccassiandMichal Koutný
Daan De Meyer
Chris Coulson
Kai Wohlfahrt
