Use product_version instead of product_name in DMI table and the string
"Hyper-V" to avoid misdetection.
Fixes: #21468
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
If we do automatic disk space rebalancing, we must be able to unlock the
encrypted volume for that in the background, thus we need to decryption
key around in userspace. Let's do this via the kernel keyring. This
allows us to do this in a relatively secure way, so that it sticks
around between homework invocations, but still is destroyed
automatically when homed goes down.
NSS mostly knows four error cases: SUCCESS, NOTFOUND, UNAVAIL, TRYAGAIN,
and they can all be used in nsswitch.conf to route requests.
So far nss-resolve would return SUCCESS + NOTFOUND + UNAVAIL. Let's also
return TRYAGAIN in some cases, specifically the ones where we are
currntly unable to resolve a request but likely could later. i.e.
errors caused by networking issues or such.
Fixes: #20786
Let's eat up special returns of dns_query_process_cname_many() when
storing hostname resolution results.
The rest of the code assumes only == 0 means success and != 0 means
error, but so far > 0 also could mean success, let's fix that.
Fixes: #21365#21140
(This was originally broken in 1db8e6d1db)
This beefs up the DNS stub logic to listen on two IP addresses:
127.0.0.53 (as before) + 127.0.0.54 (new). When the latter is contact
our stub will operate in "bypass" mode only, i.e we'll try to pass DNS
requests as unmodified upstream as we can (and not do mDNS/LLMNR and
such, also no DNSSEC validation – but we'll still do DNS-over-TLS
wrapping).
This is supposed to be useful for container environments or tethering:
this stub could be exposed (via NAT redirect) to clients of this system
and we'll try to stay out of the way with doing too much DNS magic
ourselves, but still expose whatever the current DNS server is from
upstream under a stable address/port.
How to use this:
# iptables -t nat -I PREROUTING -p udp -i <interface> --dport 53 -j DNAT --to 127.0.0.54:53
# echo 1 > /proc/sys/net/ipv4/conf/<interface>/route_localnet
ASan is having a hard time to get its LD_PRELOAD= shenanigans straight
with all the shells flying around. Let's make it a bit easier by using
one of the nifty systemctl's features instead.
so we can run TEST-46 under sanitizers once again.
`systemd-homed` runs fsck on home directories, which reports a memory
leak we're not interested in. Let's introduce an LSan suppression file
to get around this. Since the patterns in the suppression file are
matched using basic substring match[0], they're a bit cumbersome, but
should get the work one.
[0] https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer#suppressions
Example leaks (as reported by TEST-46):
```
systemd-homed[1333]: =================================================================
systemd-homed[1333]: ==1333==ERROR: LeakSanitizer: detected memory leaks
systemd-homed[1333]: Direct leak of 24 byte(s) in 1 object(s) allocated from:
systemd-homed[1333]: #0 0x7f0c8facccd1 in calloc (/usr/lib/clang/12.0.1/lib/linux/libclang_rt.asan-x86_64.so+0xf4cd1)
systemd-homed[1333]: #1 0x558d9494ff67 (/usr/bin/fsck+0x3f67)
systemd-homed[1333]: Direct leak of 6 byte(s) in 1 object(s) allocated from:
systemd-homed[1333]: #0 0x7f0c8fa906c1 in strdup (/usr/lib/clang/12.0.1/lib/linux/libclang_rt.asan-x86_64.so+0xb86c1)
systemd-homed[1333]: #1 0x558d949518fd (/usr/bin/fsck+0x58fd)
systemd-homed[1333]: SUMMARY: AddressSanitizer: 30 byte(s) leaked in 2 allocation(s).
systemd-homed[1337]: ==1337==WARNING: Symbolizer was blocked from starting itself!
systemd-homed[1337]: =================================================================
systemd-homed[1337]: ==1337==ERROR: LeakSanitizer: detected memory leaks
systemd-homed[1337]: Direct leak of 67584 byte(s) in 1 object(s) allocated from:
systemd-homed[1337]: #0 0x7f01edb84b19 (/usr/lib/clang/12.0.1/lib/linux/libclang_rt.asan-x86_64.so+0xf4b19)
systemd-homed[1337]: #1 0x7f01e8326829 (/usr/bin/../lib/libLLVM-12.so+0xb46829)
systemd-homed[1337]: SUMMARY: AddressSanitizer: 67584 byte(s) leaked in 1 allocation(s).
```
With the suppression file:
```
systemd-homed[1339]: -----------------------------------------------------
systemd-homed[1339]: Suppressions used:
systemd-homed[1339]: count bytes template
systemd-homed[1339]: 2 30 /bin/fsck$
systemd-homed[1339]: -----------------------------------------------------
systemd-homed[1343]: ==1343==WARNING: Symbolizer was blocked from starting itself!
systemd-homed[1343]: -----------------------------------------------------
systemd-homed[1343]: Suppressions used:
systemd-homed[1343]: count bytes template
systemd-homed[1343]: 1 67584 /lib/libLLVM
systemd-homed[1343]: -----------------------------------------------------
```
veritysetup-generator, fstab-generator: Setup and mount usr verity device when 'usrhash' (and optionally systemd.verity_usr_*) is present as kernel command line parameter
* man: document FIDO2 device removal
Indicate to users how to remove FIDO2 device in the --fido2-device=path section by setting path to an empty string (""). Tested on systemd 249 (249.6-3-arch)
Since 8b8024f1c2 and the follow-up commits, the
main config file may be located in /usr or in other paths. But the code in
analyze.c was still assuming that it must be in /etc. Things mostly worked for
our own config files because we usually install a comments-only file in /etc,
but was not correct in the general case.
This fixes in particular 'systemd-analyze cat-config systemd/zram-generator.conf'.
In Fedora we distribute a config file in zram-generator-defaults.rpm that is in
/usr/lib, and 'cat-config' would refuse to show it because
/etc/systemd/zram-generator.conf does not exist.
The main config file is optional, but let's print an informative message
because this is a slightly unusual case.
The file paths that we printed were missing the root prefix.
The function name `method_reload` is used both in dbus-unit.c and
dbus-manager.c for static functions.
With the previous addition of adding the function name to the audit
information on SELinux denials, rename the one (and its relatives) in
dbus-unit.c as most of the functions in src/core/dbus-unit.c are already
prefixed with `bus_unit_`.
`mac_selinux_generic_access_check()` should not be called directly, only
via the wrapper macros `mac_selinux_access_check` and
`mac_selinux_unit_access_check`.
path might be NULL when checking against the system permissions, so wrap
with strna().
The command line might not be available over D-Bus and thus cl might be
empty. Print "n/a" instead of the empty string.
Include the systemd C function name in the audit message to improve the
debug ability on denials.
Similar like kernel denial messages include the syscall name.
MMapFileDescriptor carries a reference to its originating
MMapCache, there's no value in supplying the
MMapFileDescriptor-centric functions a separate MMapCache.
A future commit will rename these functions to consistently use
an mmap_cache_fd_* prefix for improved clarity.
4e76715489 added a slightly different UUID
in the header and in the docs. This makes the code match the docs.
> As some downstream projects are already using the UUID as in the docs, most
> notably util-linux [1], we should adjust code to match doc; no shipping
> LoongArch systems are using upstream systemd, and no open-source distro is
> merging LoongArch support yet, so the change should break no one. This also
> matches the work being done by @yetist at loongarch64/systemd#7.
[1] https://github.com/util-linux/util-linux/commit/2d29fccaad267d1b003dc0ed2bb9634ff76f3e49
This adds a helper script:
$ python3 tools/list-discoverable-partitions.py <src/shared/gpt.h
<!-- generated with tools/list-discoverable-partitions.py -->
| Partition Type UUID | Name | Allowed File Systems | Explanation |
|---------------------|------|----------------------|-------------|
| _Root Partition (Alpha)_ | `6523f8ae-3eb1-4e2a-a05a-18b695ae656f` | [Root Partition] | [Root Partition more] |
| _Root Partition (ARC)_ | `d27f46ed-2919-4cb8-bd25-9531f3c16534` | ditto | ditto |
...
The output can be pasted into the markdown file. I think this works better than
trying to match the two lists by hand.
Boqun Feng
Lennart Poettering
Frantisek Sumsal
Andrew Stone
Jan Janssen
Luca Boccassi
Robert-L-Turner
Daan De Meyer
Zbigniew Jędrzejewski-Szmek
Christian Göttsche
Vito Caputo
Mark Boudreau