Previously, when a process outputs something and exit just after
epoll_wait() but before process_child(), then the IO event is ignored
even if the IO event has higher priority. See #18190.
This can be solved by checking epoll event again after process_child().
However, there exists a possibility that another process outputs and
exits just after process_child() but before the second epoll_wait().
When the IO event has lower priority than the child event, still IO
event is processed.
So, this makes new epoll events and child events are checked in a loop
until no new event is detected. To prevent an infinite loop, the number
of maximum trial is set to 10.
Fixes#18190.
Since f17bdf8264 the test-repart was
effectively disabled, since `/dev/loop-control` is a character special
file, whereas `-f` works only on regular files. Even though we could use
`-c` to check specifically for character special files, let's use `-e`
just in case.
After all we are only interested in symlinks either in top-level config
directory or in .wants and .requires sub-directories.
As a bonus this should speed up ListUnitFiles() roughly 3-4x on systems
with a lot of units that use drop-ins (e.g. SSH jump hosts with a lot of
user session scopes).
Tables with only one column aren't really tables, they are lists. And if
each cell only consists of a single word, they are probably better
written in a single line. Hence, shorten the man page a bit, and list
boot loader spec partition types in a simple sentence.
Also, drop "root-secondary" from the list. When dissecting images we'll
upgrade "root-secondary" to "root" if we mount it, and do so only if
"root" doesn't exist. Hence never mention "root-secondary" as we never
will mount a partition under that id.
This makes sure nspawn's --volatile=yes switch works again: there we
have a read-only image that is overmounted by a tmpfs (with the
exception of /usr). This we need to mkdir all mount points even though
the image is read-only.
Hence, let's drop the optimizatio of avoiding mkdir() on images that are
read-only, it's wrong and misleading here, since the image itself might
be read-only but our mounts are not.
Previously handling of DISSECT_IMAGE_MKDIR was pretty weird and broken:
it would control both if we create the top-level mount point when
mounting an image, and the inner mount points for images that consist of
multiple file systems. However, the latter is redundant, since
1f0f82f131 does this too, a few lines
further up – unconditionally!
Hence, let's make the meaning of DISSECT_IMAGE_MKDIR more strict: it
shall be only about the top-level mount point, not about the inner ones
(where we'll continue to create what is missing alwayway). Having a
separate flag for the top-level mount point is relevant, since the mount
point dir created by it will remain on the host fs – unlike the
directories we create inside the image, which will stay within the
image.
This slightly change of meaning is actually inline with what the flag is
actually used for and documented in systemd-dissect.
Apart from tests, the new argument isn't used anywhere, so there should be no
functional change. Note that the two arms of the big conditional are switched, so the
diff is artificially inflated. The actual code change is rather small. I dropped the
path which extracts ret_value manually, because it wasn't supporting unescaping of the
escape character properly.
… when not used to escape the separator (,) or the escape character (\).
This mostly restores behaviour from before 0645b83a40,
but still allows "," to be escaped.
Partially fixes#18952.
With EXTRACT_UNESCAPE_SEPARATORS, backslash is used to escape the separator.
But it wasn't possible to insert the backslash itself. Let's allow this and
add test.
A test for stripping of escaped backslashes without any flags was explicitly
added back in 4034a06ddb. So it seems to be on
purpose, though I would say that this is at least surprising and hence deserves
a comment.
In test-extract-word, add tests for standalone EXTRACT_UNESCAPE_SEPARATORS.
Only behaviour combined with EXTRACT_CUNESCAPE was tested.
In the conversion from strv_split() to strv_split_full() done in
7bb553bb98, EXTRACT_DONT_COALESCE_SEPARATORS was
added. I think this was just by mistake… We never look for "empty options", so
whether we immediately ignore the extra separator or store the empty string in
strv, should make no difference.
When we failed to split the options (because of disallowed quoting syntax, which
might be a bug in its own), we would silently fail. Instead, let's emit a warning.
Since we ignore the value if we cannot parse it anyway, let's ignore this error
too.
Closes#18669.
This creates a "well known" for sgx_enclave ownership. By doing this here we
avoid the risk that various projects making use of the device will provide
similar-but-slightly-incompatible installation instructions, in particular
using different group names.
ACLs are actually a better approach to grant access to users, but not in all
cases, so we want to provide a standard group anyway.
Mode is 0o660, not 0o666 because this is very new code and distributions are
likely to not want to give full access to all users. This might change in the
future, but being conservative is a good default in the beginning.
Rules for /dev/sgx_provision will be provided by libsg-ae-pce:
https://github.com/intel/linux-sgx/issues/678.
Skip printing the coredump info table when using the `debug` verb in
combination with the `-q/--quiet` option. Useful when trying to gather
coredump info non-interactively via scripted gdb commands.
Fixes: systemd/systemd#18935
otherwise udev complains about the file being world-writable:
systemd-udevd[228]: Configuration file /etc/udev/rules.d/00-set-LD_PRELOAD.rules is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
Fixes: systemd/systemd-centos-ci#354
This reverts commit 876c75fe87.
The patch seems to cause usb devices to get some attributes set from the parent
PCI device. 'hwdb' builtin has support for breaking iteration upwards on usb
devices. But when '--subsystem=foo' is specified, iteration is continued. I'm
sure it *could* be figured out, but it seems hard to get all the combinations
correct. So let's revert to functional status quo ante, even if does the lookup
more than once unnecessarily.
Fixes#18125.
When running TEST-22 under ASan, there's a chain of events which causes
`stat` to output an extraneous ASan error message, causing following
fail:
```
+ test -d /tmp/d/1
++ stat -c %U:%G:%a /tmp/d/1
==82==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.
+ test = daemon:daemon:755
.//usr/lib/systemd/tests/testdata/units/testsuite-22.02.sh: line 24: test: =: unary operator expected
```
This is caused by `stat` calling nss which in Arch's configuration calls
the nss-systemd module, that pulls in libasan which causes the $LD_PRELOAD
error message, since `stat` is an uninstrumented binary.
The $LD_PRELOAD variable is explicitly unset for all testsuite-* services
since it causes various issues when calling uninstrumented libraries, so
setting it globally is not an option. Another option would be to set
$LD_PRELOAD for each `stat` call, but that would unnecessarily clutter
the test code.
So Linux has this (insane — in my opinion) "feature" that if you name a
network interface "foo%d" then it will automatically look for the
interface starting with "foo…" with the lowest number that is not used
yet and allocates that.
We should never clash with this "magic" handling of ifnames, hence
refuse this, since otherwise we never know what the name is we end up
with.
We should probably switch things from a deny list to an allow list
sooner or later and be much stricter. Since the kernel directly enforces
only very few rules on the names, we'd need to do some research what is
safe and what is not first, though.
We use 'unsigned' as the type, but netlink(7) says the type is 'int'.
It doesn't really matter, since they are both the same size. Let's use
our helper to shorten the code a bit.
