Note, this drops logging only test case for crypt_preferred_method(),
as that requires explicitly dlopen() the library. But, we should test
that make_salt() and friends automatically dlopen() it.
libcrypt was no longer built by default since glibc-2.38, and it has been
completely removed since glibc-2.39.
Let's always use libxcrypt, unless when building with musl. As already
major distribution already have libxcrypt-4.4.x, hence let's also bump
the required minimum version to 4.4.0.
libxcrypt cannot be built with musl, hence the previous fallback logic
in libcrypt-util.c are moved to musl/crypt.c.
Note, libxcrypt-4.4.0 was released on 2018-11-20.
See also #38608.
Major distributions already have libseccomp 2.5.x or newer.
Let's bump to the required minimum version to 2.4.0, which provides
SCMP_ACT_KILL_PROCESS, SCMP_ACT_LOG, SCMP_ARCH_PARISC, and
SCMP_ARCH_PARISC64.
Note, libseccomp 2.4.0 was released on 2019-03-15.
See also #38608.
Major distributions already have cryptsetup newer than 2.4.0.
Let's bump the minimal required version.
Note, cryptsetup 2.4.0 was released on 2021-08-18.
See also #38608.
Major distributions already have elfutils >= 0.190.
Let's bump the required minimum version.
Note, elfutils 0.177 was released on 2019-08-14.
See also #38608.
Major distributions already have blkid >= 2.37.
Let's bump the minimal required version.
Note, util-linux (which provides blkid) 2.37 was released on 2021-06-01.
See also #38608.
All major distributions have switched to OpenSSL version 3.x.
Let's drop support of OpenSSL version 1.x.
Note, OpenSSL 3.0 was released on 2021-09-07 (and will be EOL on 2026-09-07).
See also #38608.
MultiPathRoute= can now specify device-only nexthops without a gateway
address, e.g. MultiPathRoute=@wg0. This enables ECMP configurations over
interfaces that don't use gateway addresses, such as WireGuard tunnels.
The syntax is extended from "address[@device] [weight]" to
"[address]@device [weight]". The address is now optional, but at least
one of gateway or device must be specified. The @ symbol must still be
present for device-only routes, making the syntax unambiguous: @wg0
specifies a device, while a bare IP address specifies a gateway.
Device-only nexthops are only available for IPv4 routes. Device-only
multipath routes for IPv6 are not supported by the kernel's netlink
interface and will be rejected with a warning.
This change is fully backwards compatible. All existing configurations
continue to work unchanged, as they always included a gateway address.
Closes#39699.
* 5a476a92de Use Path.relative_to instead of Path.parts
* 03f41faf9f Update doc for mkosi ssh to mention sd v256 sshd-vsock
* e054976d18 Rewrite note on fw deps of kernel modules in manpage
* a046243a50 Add python3-pefile to fedora tools conf
* 0bab54087e Fix truthy condition
* 01c38544b2 code review
* 563dca41da code review
* 6074d14c0e code review
* 7e842db3b1 Don't discard ordering of include/exclude entries in KernelModules=
* 0047b64785 build(deps): bump github/codeql-action from 4.31.2 to 4.31.6
* f13325bc4b build(deps): bump actions/checkout from 5.0.0 to 6.0.0
* 9ac31d1795 Add zram and nfnetlink to default initrd
* 4bdb47b6da verity: copy signing certificate to /usr/lib/verity.d/
* 8865afde9e Improve manpage output using pandoc lua filter (#4005)
* a425313c58 Pass environment to systemd-sysusers invocation
* 23f09d5de7 Make Ruff check for dangling whitespace
* abeed73d13 qemu: Add missing sandbox
* a05872e523 Ssh=yes maps to Ssh=always, update the manpage
* 79489534ca Warn of mkosi's sshd lacking support in distros' SElinux policy
* 696f99da43 Manpage: Update supported output formats
* 21675c4822 Silence swtpm SHA1 signature deprecation warning
* df53510982 DOC: update Ssh= to note sd-v256+ already generates sshd-vsock
* 50ccef7926 Configure default tools tree with ToolsTree=yes
* 0b701c690d opensuse: do not install openSUSE-release for Leap >= 16.0
* 4bababf421 opensuse: fix mirror URL for Leap >= 16.0
* c43123398c config.py: add config_default_proxy_exclude()
* 07a0a2be67 installer: Only mount configured state subdirs into sandbox
* d5efbf6f8c build(deps): bump github/codeql-action from 3.30.5 to 4.31.2
* 2912ed20d5 PTY forward fixes
* 66dab75259 sandbox: Drop all capabilities that don't make sense in userns
* 8fe5df4400 Respect SYSTEMD_TINT_BACKGROUND and SYSTEMD_ADJUST_TERMINAL_TITLE
* b9d208789d log: Drop konsole hack
* 7fa6eac65c Clarify that mkosi.images is not picked up in mkosi.conf.d
* 08a0f768dd vmspawn: Support BindUser=
* c7c3eaee4e mkosi-vm: Enable universe repository for ubuntu in mkosi-vm
* 688e77f1a8 vmspawn: Use --grow-image
* c47b7fe57b arch: Switch to the newly established fastly mirror
* 7db8f2cda3 Match compressed pacman packages too
* e3b3b93c50 Prevent using Overlay=yes with Format=portable
* 83a25324b3 Make sure apt sources are installed when BaseTrees= is in the mix
* f6fa2fd6a0 test: add unit tests for parents_below() utility function
* 1eafbd8d03 Don't print newlines in stash_terminal_title()
* bbaf92b50e Don't print newline after ansi sequences
* d1b84f5fb3 Look for .sdmagic before we consider a PE binary a UKI/addon
* b4efdbf14e Treat /opt the same as /usr for the sandbox
* 71ffced0f1 Rework PACKAGE_GLOBS to be a PackageManager classmethod
* 29605c2757 Various SPDX and whitespace fixes
Alpine/postmarketOS build coreutils with --enable-single-binary=symlinks.
In that case, all commands provided by coreutils are symlink to
/usr/bin/coreutils, and it calls prctl(PR_SET_NAME, argv[0]), hence the comm
will be the path to the symlink.
This also makes not kill sleep command with SIGKILL in TEST-17-UDEV, that is
totally unnecessary.
The test cases are not related to systemd-resolved.
While moving the test cases, now userdbctl is used for obtaining UID/GID
for the dynamic user, as musl does not support nss module, hence getent
does not provide information about the dynamic user.
If there is no corresponding audit session, then the session ID is
prefixed with 'c', and in that case the session ID should be used as is
in bus path.
If sh is not bash, some builtin command behave slightly differently.
E.g. if sh is provided by busybox, its builtin test command does not check if
the path is a mount point or not, and 'test -w' only checks the access mode of
the inode. So, even if a readonly filesystem is mounted on a directory,
the test command may succeed.
To avoid such confusion, let's unconditionally use bash.
Using systems with ADLINK COM-HPC-ALT, ASRock Rack ALTRAD8UD-1L2T and
AMPONED8-2T/BCM boards, there's an issue due to the internal network
connection between the BMC and host, which runs over USB (i.e. Linux
running on the BMC configures a USB gadget ethernet device, with a link
local address).
With the default configuration on Ubuntu (I'm using 25.10),
NetworkManager repeatedly tries to get an address for the interface
using DHCP, resulting in an "Activation of network connection failed"
notification every minute or two.
Add 82-net-auto-link-local.hwdb and 82-net-auto-link-local.rules to the
build system and update 82-net-auto-link-local.hwdb to add the USB
device vendor/product pairs I've seen on the various systems I have with
Ampere Altra and AmpereOne CPUs.
musl's getopt_long() behaves something different in handling optional arguments:
```
$ journalctl _PID=1 _COMM=systemd --since 19:19:01 -n all --follow
Failed to add match 'all': Invalid argument
```
This introduces getopt_long_fix() that reorders the passed arguments to make
getopt_long() provided by musl works as what we expect.
Also, musl's getopt() always behaves POSIXLY_CORRECT mode, and stops parsing
arguments when a non-option string found. Let's always use getopt_long().
When we send a batch of nfnl messages, but e.g. without sufficient
privilege, the kernel may only return an error message for
NFNL_MSG_BATCH_BEGIN and ignore all later messages.
So, we need to read the response for the NFNL_MSG_BATCH_BEGIN,
and if it is an error ignore the replies for the rest.
When we send a message with NLM_F_ACK, but if later we are not
interested in the reply and do not want to call sd_netlink_read(),
the reply will be stored in the rqueue forever.
Let's introduce a way to ignore received message without waiting reply.
When sd-event is attached to the sd-netlink object, use the timestamp of
the current event, otherwise call now().
This mostly change nothing. Preparation for later change.
One of the pending commits in Weblate causes conflicts due to an
unfortunate timing with 9e929e4aa7, so
let's pull the changes into the main tree manually (and resolve the
conflicts).
This splits out common logic in keyutil and systemd-measure.
Note, previously d2i_PUBKEY_fp() was used, but now it is replaced with
d2i_PUBKEY(), as musl seems to not support reading from memstream.
The previous commit fixes all remaining violations of the check for
a very specific setup (Fedora Rawhide with as many dependencies as
possible installed). The linter job in CI runs that specific setup
so we enable the check in the clang-tidy config but do not yet enable
the clang-tidy test suite in meson by default as it will very likely
still fail in different setups than the one in CI.
- Do not use '%m' when errno is not set.
- Do not use pam_syslog_errno() when errno is not set.
- Use pam_debug_syslog_errno() rather than log_debug_errno().
- Use 0 rather than PAM_SUCCESS in the function that returns negative
errno, though PAM_SUCCESS == 0, hence that does not change any
behavior.
- Append missing full stop in the log message.
Currently, the result of pam_debug_syslog_errno() is unused, hence this
does not change anything and may be slightly redundant. But let's follow
our usual coding style.
- pam_log_oom() passes ENOMEM rather than -ENOMEM, hence previously
pam_log_oom() did not return PAM_BUF_ERR.
- We may (mistakenly) pass SYNTHETIC_ERRNO(). Let's gracefully handle that.
- Introduce errno_to_pam_error() helper function.
Currently, when a socket unit specifies SmackLabel=,
the label is not applied to the underlying Unix socket file or its file
descriptor.
This change ensures that the SMACK label is applied both to the
Unix socket path on the filesystem and to all associated socket FDs
when the socket is created.
Testing:
- Tested on Fedora 43 with kernel 6.17.7 with SMACK enabled.
- Created a systemd socket unit:
[Unit]
Description=UNIX socket
[Socket]
ListenStream=/run/test.sock
SmackLabel=label
[Install]
WantedBy=sockets.target
- Created a corresponding service:
[Unit]
Description=UNIX socket service
Requires=test.socket
[Service]
ExecStart=/usr/bin/socat -v - -
StandardInput=socket
[Install]
WantedBy=multi-user.target
- Verified SMACK labels using getfattr:
- Without SmackLabel:
```
# file: run/test.sock
security.SMACK64="_"
# file: proc/<pid>/fd/*
security.SMACK64="*"
```
- With SmackLabel=label:
```
# file: run/test.sock
security.SMACK64="label"
# file: proc/<pid>/fd/*
security.SMACK64="label"
```
The function socket_address_listen() is declared at shared/socket-label.c,
however its prototype was in basic/socket-util.h. This moves the
prototype to shared/socket-label.h.
Also, enum SocketAddressBindIPv6Only is not used anymore in basic/*.[ch].
Let's move the definition and its string table to shared/socket-label.[ch].
Follow-up for b25a930f0e.
Yu Watanabe