A Lifetime of 0 indicates that the router is not a default router anymore
and associated default route should be discarded from host's routing table.
https://datatracker.ietf.org/doc/html/rfc4861
```
Router Lifetime
16-bit unsigned integer. The lifetime associated
with the default router in units of seconds. The
field can contain values up to 65535 and receivers
should handle any value, while the sending rules in
Section 6 limit the lifetime to 9000 seconds. A
Lifetime of 0 indicates that the router is not a
default router and SHOULD NOT appear on the default
router list. The Router Lifetime applies only to
the router's usefulness as a default router; it
does not apply to information contained in other
message fields or options. Options that need time
limits for their information include their own
lifetime fields.
```
received
RFC4191 – Section 2.3 Route Information Option's Prf field:
If the Reserved (10) value is received, the Route Information Option MUST be ignored.
RFC4861 Neighbor Discovery – Sections 4.2 and 6.3.4
From section 4.2. Router Advertisement Message Format:
Cur Hop Limit 8-bit unsigned integer. The default value that
should be placed in the Hop Count field of the IP
header for outgoing IP packets. A value of zero
means unspecified (by this router).
Now the MTU is not displayed. with this patch it's fixed.
(networkctl)⚡ % ./networkctl status enp0s31f6 ~/tt/networkctl/build
WARNING: systemd-networkd is not running, output will be incomplete.
● 4: enp0s31f6
Link File: /usr/lib/systemd/network/99-default.link
Network File: n/a
Type: ether
State: n/a (unmanaged)
Path: pci-0000:00:1f.6
Driver: e1000e
Vendor: Intel Corporation
Model: Ethernet Connection (2) I219-LM
HW Address: 8c:16:45:6c:83:b9 (LCFC(HeFei) Electronics Technology co., ltd)
MTU: 1500
This patch adds netdev ipvtap that is based on the
IP-VLAN network interface, called ipvtap. An ipvtap device can be created
in the same way as an ipvlan device, using 'kind ipvtap', and then accessed
using the tap user space interface.
```
May 10 11:08:54 test systemd-networkd[447]: wwan0: Failed to stop LLDP: Success
May 10 11:08:54 test systemd-networkd[447]: wwan0: Gained carrier
May 10 11:08:54 test systemd-networkd[447]: wwan0: Failed to start LLDP: Success
```
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.
When VXLAN destination port is unset and GPE is set
then assign 4790 to destination port. Kernel does the same as
well as iproute.
IANA VXLAN-GPE port is 4790
Fillup IFLA_INET6_ADDR_GEN_MODE while we do link_up.
Fixes the following error:
```
dummy-test: Could not bring up interface: Invalid argument
```
After reading the kernel code when we do a link up
```
net/core/rtnetlink.c
IFLA_AF_SPEC
af_ops->set_link_af(dev, af);
inet6_set_link_af
if (tb[IFLA_INET6_ADDR_GEN_MODE])
Here it looks for IFLA_INET6_ADDR_GEN_MODE
```
Since link up we didn't filling up that it's failing.
Closes#12504.
When there is bad link in the network the carrier goes up/down.
This makes networkd stops all the clients and drop config.
But if the remote router/dhcpserver running a prevention
of DHCP Starvation attack or DHCP Flood attack it does not allow
networkd to take a DHCP lease resulting failure in configuration.
This patch allows to keep the client running and keep the conf
also for this scenario.
Closes#9111
This work add support to generic netlink to sd-netlink.
See https://lwn.net/Articles/208755/
networkd: add support FooOverUDP support to IPIP tunnel netdev
https://lwn.net/Articles/614348/
Example conf:
/lib/systemd/network/1-fou-tunnel.netdev
```
[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
```
/lib/systemd/network/ipip-tunnel.netdev
```
[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=true
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=true
FOUDestinationPort=5555
```
$ ip -d link show ipip-tun
```
5: ipip-tun@NONE: <POINTOPOINT,NOARP> mtu 1472 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ipip 10.65.208.212 peer 10.65.208.211 promiscuity 0
ipip remote 10.65.208.211 local 10.65.208.212 ttl inherit pmtudisc encap fou encap-sport auto encap-dport 5555 noencap-csum noencap-csum6 noencap-remcsum numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
Now the setting MTU is embedded into the link_up message which makes it
incapable of setting MTU if link is up. MTU can be set while Link is up.
Closes#9254
sd_radv_stop is called from two places. if sd_radv_stop is alrady
success then just don't try to close it .
```
systemd-networkd[604]: RADV: Stopping IPv6 Router Advertisement daemon
systemd-networkd[604]: RADV: Unable to send last Router Advertisement with router lifetime set to zero: Bad file descriptor <==================HERE
systemd-networkd[604]: RADV: Updated prefix 2a0a:*:*:fc::/64 preferred 1h valid 2h
systemd-networkd[604]: RADV: Started IPv6 Router Advertisement daemon
```
Closes one of the issue #8960
This "netdevsim" as implied by the name is a tool for network developers and is a simulator.
This simulated networking device is used for testing various networking APIs and at this time
is particularly focused on testing hardware offloading related interfaces.
Test the "[Bridge]" section keys
```
[Bridge]
UnicastFlood=true
HairPin=true
UseBPDU=true
FastLeave=true
AllowPortToBeRoot=true
Cost=555
Priority=23
```
```
test_bridge_init (__main__.BridgeTest) ... ok
test_bridge_port_priority (__main__.BridgeTest) ... ok
test_bridge_port_priority_set_zero (__main__.BridgeTest)
It should be possible to set the bridge port priority to 0 ... ok
test_bridge_port_property (__main__.BridgeTest)
Test the "[Bridge]" section keys ... ok
```
This patch add support to enables to send User Class option code 77
RFC 3004.
This option MAY carry multiple User Classes.
The format of this option is as follows:
Code Len Value
+-----+-----+--------------------- . . . --+
| 77 | N | User Class Data ('Len' octets) |
+-----+-----+--------------------- . . . --+
where Value consists of one or more instances of User Class Data.
Each instance of User Class Data is formatted as follows:
UC_Len_i User_Class_Data_i
+--------+------------------------ . . . --+
| L_i | Opaque-Data ('UC_Len_i' octets) |
+--------+------------------------ . . . --+
UserClass=
A DHCPv4 client can use UserClass option to identify the type or category of user or applications
it represents. The information contained in this option is an string that represents the user class
of which the client is a member. Each class sets an identifying string of information to be used by the DHCP service to classify clients. Takes a whitespace-separated list.
UserClass= hello world how are you
Closes: RFC: #5134
Susant Sahani
Susant Sahani
Susant Sahani