Add a hwdb entry for the HP EliteBook 845 G7 laptop.
The Fn+F11 airplane mode key is reported as KEY_F8 by the atkbd
driver. Map it to !wlan to expose the correct wireless radio switch
event to userspace.
Each of these citerefentry targets exists, but is referenced with a
section it is not installed in, so the generated link does not resolve
and 'man <page>' sends the reader to the wrong section.
systemd-confext 1 -> 8
systemd-cryptsetup@.service 5 -> 8
systemd-firstboot.service 8 -> 1 (three places)
systemd-nspawn 8 -> 1
systemd-userdbd.service 7 -> 8
The section for each was taken from the refmeta of the page that
defines it. In systemd.special.xml the neighbouring reference to
systemd-veritysetup@.service already uses 8, which is what the
cryptsetup one should have been.
The ASUS ROG Flow Z13 (GZ302EA) keyboard/touchpad (USB 0B05:1A30) is
attached through a USB port that firmware reports as removable.
Because of that, 65-integration.rules sets
ID_INPUT_TOUCHPAD_INTEGRATION=external, and libinput skips
disable-while-typing (DWT) for the device.
The touchpad is physically integrated into the tablet's keyboard
accessory, which has no supported standalone/external use case, so
add a hwdb entry in 70-touchpad.hwdb that overrides
ID_INPUT_TOUCHPAD_INTEGRATION=internal, restoring DWT. This mirrors
the existing Microsoft Surface Type Cover entry, which addresses the
same root cause.
Since 262299dccb compare_locations() falls
through to a realtime-based comparison in compare_boot_ids() if the
compared entries have different boot IDs (and seqnum IDs). This can,
however, cause us to pick up the wrong entry/file on systems with
unreliable/missing RTC, where early-boot entries of a boot might have
earlier realtime timestamp compared to the previous boot.
For example, here's a minimal reproducer consisting of two journal files
containing three entries from two separate boot IDs:
$ journalctl --file one.journal -o export
__CURSOR=s=ba37c62fcacf406aad088166c4963cd1;i=1;b=c220efc91dd440deb89d82c98ddb11a5;m=186a0;t=1e8480;x=39d4323a8e5a248d
__REALTIME_TIMESTAMP=2000000
__MONOTONIC_TIMESTAMP=100000
__SEQNUM=1
__SEQNUM_ID=ba37c62fcacf406aad088166c4963cd1
_BOOT_ID=c220efc91dd440deb89d82c98ddb11a5
NUMBER=1
$ journalctl --file two.journal -o export
__CURSOR=s=9d15197efcc54d8ca5d6e7cce28373e2;i=1;b=686dc35e78f64b6ba126018ab6e8bae9;m=186a0;t=f4240;x=57db1c7bd38b37ed
__REALTIME_TIMESTAMP=1000000
__MONOTONIC_TIMESTAMP=100000
__SEQNUM=1
__SEQNUM_ID=9d15197efcc54d8ca5d6e7cce28373e2
_BOOT_ID=686dc35e78f64b6ba126018ab6e8bae9
NUMBER=2
__CURSOR=s=9d15197efcc54d8ca5d6e7cce28373e2;i=2;b=686dc35e78f64b6ba126018ab6e8bae9;m=30d40;t=2dc6c0;x=3513732159948113
__REALTIME_TIMESTAMP=3000000
__MONOTONIC_TIMESTAMP=200000
__SEQNUM=2
__SEQNUM_ID=9d15197efcc54d8ca5d6e7cce28373e2
_BOOT_ID=686dc35e78f64b6ba126018ab6e8bae9
NUMBER=3
The first file (one.journal) contains a single entry from the first boot
(c220efc91dd440deb89d82c98ddb11a5) and a realtime timestamp of 2s. The
second file (two.journal) contains two entries from the second boot
(686dc35e78f64b6ba126018ab6e8bae9) - the first entry has a realtime
timestamp of 1s (i.e. _earlier_ than the tail timestamp of the first
boot), and the second entry has a realtime timestamp of 3s (i.e. after
a time correction).
This works fine for forward iteration, but seeking directly to the
second entry is when things go south:
First entry:
$ python3 <<EOF
c = "s=ba37c62fcacf406aad088166c4963cd1;i=1;b=c220efc91dd440deb89d82c98ddb11a5;m=186a0;t=1e8480;x=39d4323a8e5a248d"
from systemd import journal; j = journal.Reader(path="."); j.seek_cursor(c); j.get_next(); print(j.test_cursor(c))
EOF
True
Second entry:
$ python3 <<EOF
c = "s=9d15197efcc54d8ca5d6e7cce28373e2;i=1;b=686dc35e78f64b6ba126018ab6e8bae9;m=186a0;t=f4240;x=57db1c7bd38b37ed"
from systemd import journal; j = journal.Reader(path="."); j.seek_cursor(c); j.get_next(); print(j.test_cursor(c))
EOF
False
That's because:
- we call sd_journal_seek_cursor(...) and parse it (seqnum, seqnum_id,
boot_id, realtime, ...)
- we call sd_journal_next() -> real_journal_next() which iterates over
all open journal files to find all candidate entries and pick the
best one
- for each journal file we call next_beyond_location()
- for next_beyond_location(one.journal) we get:
- last_direction is _DIRECTION_INVALID, so we call find_location_with_matches()
- we fall all the way through to journal_file_move_to_entry_by_realtime()
- here we try to find the first entry with realtime >= 1s; this file
has only one entry with realtime = 2s which matches
- we got a match and new_file is unset, so we set it to one.journal
- for next_beyond_location(two.journal) we get:
- we fall through to find_location_with_matches()
- here we have a matching seqnum, so we call journal_file_move_to_entry_by_seqnum()
- we got another match but new_file is set, so we call compare_locations(two.journal, one.journal):
- we fall through to compare_boot_ids()
- we get the tail timestamps of both journal files and return
CMP(second boot, first boot) -> CMP(3s, 2s) = 1
- this bubbles up back to real_journal_next() where found = false, so
new_file remains one.journal (the wrong journal file)
- this is followed by set_location(one.journal), which makes the
following sd_journal_test_cursor() call fail, as the
boot_id/seqnum_id/... of the current position don't match with the
cursor
To fix this, let's track the journal file that holds the exact cursor
match, and override the chosen candidate if needed once we process all
open journals.
Resolves: #31516
Document that needs-restart/needs-reload markers follow try-restart /
try-reload behavior for enqueue-marked, and drop the duplicated note
from the deprecated --marked alias entry.
shallow_join_strv() shallow-copies the first strv into a temporary
array, then uses strv_contains() while appending entries from the
second strv. That helper requires a NUL-terminated strv.
Keep the temporary array terminated before each lookup. After an
append, the previous terminator is overwritten, so postponing the
NULL write until after the loop would let the next strv_contains()
scan past the initialized entries.
This is a correctness fix, not an optimization: it avoids a
potential out-of-bounds read when deduplicating the second strv.
Commit 52ceba53d3 made multipart replies append in receive
order, but each append walked the chain from the head.
Cache the tail on the chain head, so new fragments can be
linked directly. The visible next-pointer chain and order stay
unchanged.
Follow-up for: 52ceba53d3
This change adds explicit D-Bus policy rules to allow calling the
Freeze and Thaw methods on the systemd interfaces.
- Add D-Bus policy rules for Manager interface FreezeUnit/ThawUnit methods
- Add D-Bus policy rules for Unit interface Freeze/Thaw methods
Reword the note for --fido2-with-user-presence= to make it clear that the
setting has no effect if the token does not support the up feature, or does
not allow the user presence requirement to be enabled or disabled for the
requested operation. Drop the surrounding parentheses and the spurious
"in other contexts" qualifier.
Apply the same rewording to the sibling --fido2-with-client-pin= and
--fido2-with-user-verification= options so the three parallel FIDO2
entries stay consistent.
Fixes#23632.
- --strict=/--full moved to the OPTION_LONG() parser framework that
replaced getopt in the meantime
- the is-supported commit is dropped, main grew that verb independently.
That also gets rid of the early tpm2_support() gate that broke CI back
then, and TEST-70-TPM2 runs with a software TPM these days anyway
- special_glyph() → glyph() renames
- the log table PCR filter needs an EVENT_LOG_RECORD_IS_PCR() guard now
that the event log has NV-index records
Not sure what a good compromise between too much and too less is.
Semi happy with SYSTEMD_LOG_LEVEL=notice now.
Co-authored-by: Akarithos <277667353+Akarithos@users.noreply.github.com>
Add a --strict option that makes sure all PCRs for which components were
found are indeed included in the set of predicted PCRs. Instead throw an
error. Avoids creating a policy less secure than requested.
Co-authored-by: Akarithos <277667353+Akarithos@users.noreply.github.com>
Shorten number of bytes show of sha256 hashes. Similar to git, makes
output less wide and more readable.
Co-authored-by: Akarithos <277667353+Akarithos@users.noreply.github.com>
Using red and green in the output is rather confusing as that is
normally associated with good or bad like in the checkmark columns.
So let's exclude those colors from the display.
Co-authored-by: Akarithos <277667353+Akarithos@users.noreply.github.com>
Combining --ephemeral with --grow-image= truncated the file passed to
--image= to the requested size before the VM was started, so a mode whose
entire purpose is to leave the original image untouched modified it on
disk.
Skip growing the original image when running ephemeral, and instead create
the qcow2 overlay with the requested virtual size, so the guest sees the
larger disk while the base image stays read-only. As only the overlay is
sized in that case, the base image format no longer matters, so allow
--grow-image= together with qcow2 images when running ephemeral. The round
up to a multiple of 4096 moves to option parsing so both paths apply the
same value.
The vmspawn drive test grows an ephemeral VM and checks that the image
passed to --image= keeps its size, and that the overlay QEMU runs off is
created at the requested one.
group_record_match() handled the other filters, but ignored match->uuid,
so userdbctl group --uuid=... could still return non-matching groups.
Add the same UUID check used by user_record_match().
Reproduced locally:
build/userdbctl --uuid=aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa \
--output=json group root
Before result:
The command succeeded and printed the root group record.
Follow-up for: 466562c69b
The EDG parser version 6.8 now supports C23 enums with fixed underlying
types, and VSCode ships with it, so this workaround can now be removed
without breaking VSCode's internal parser.
https://en.cppreference.com/c/compiler_support/23
This reverts commit e01ca3afdb.
Use shell_maybe_quote() with SHELL_ESCAPE_EMPTY when
logging joined group and shadow group member vectors,
so empty vectors are rendered explicitly as "".
Follow-up for: f0d1266821
Follow-up for: 2eaca3ea5f
When running inside a container (during image builds or such),
`/proc/cmdline` belongs to the host and would leak the host's root= (or a
faked placeholder like root=/dev/osbuild) into the UKI.
Mirror the same guard that `90-loaderentry.install` has: check
`systemd-detect-virt --container` before falling back to `/proc/cmdline`,
and return an empty cmdline if we are in a container to ensure both
modes (`uki` and `bls`) work the same.
Signed-off-by: Simon de Vlieger <cmdr@supakeen.com>
Explicitly call label_ops_post() where necessary with specific
arguments. Previously, regardless if fopen_tmpfile_linkable_at()
success, label_ops_post() was called but its argument was heavily
conditionalized. Let's call it both on failure and success cases
with specific arguments. This should be easy to read.
This also
- moves variable declarations where used,
- drops unnecessary boolean flag call_label_ops_post.
No functional change. Just reafactoring.
Hopefully silence CID#1664328, though it is false-positive.
The erofs branch in make_filesystem() never passed the sector size to
mkfs.erofs, so FileSystemSectorSize= was silently ignored for erofs
partitions. mkfs.erofs defaults to the page size (e.g. 16K on aarch64),
which is too large for some use cases such as UFS with 4K blocks.
Pass -b <sector_size> to mkfs.erofs, but only when it is smaller than the
page size, since mkfs.erofs defaults to the page size and rejects larger
values. This matches how the other supported filesystems (xfs, ext4,
btrfs, f2fs, vfat) already handle sector_size.
Fixes#43238
systemd-repart implicitly excludes the contents of APIVFS and temporary
directories (/proc, /sys, /dev, /tmp, /run, /var/tmp) when copying files
via CopyFiles=. When populating a root partition, the contents below the
mount points of other partitions in the image (e.g. /boot, /efi for an
esp partition) are excluded as well, so that data belonging to a separate
partition is not duplicated into the root file system.
Neither of these implied denylists was documented, which surprised users
(see #32651). Document them, and explain how to work around the
mount-point exclusion by adding an explicit CopyFiles= entry for the
directory in question.
Fixes#32651
systemd-sysusers currently skips entries for groups that already exists.
However, if a group exists only in /etc/gshadow and not in /etc/group,
systemd-sysusers panics:
~# groupdel sgx
~# systemd-sysusers; echo $?
Creating group 'sgx' with GID 106.
0
~# systemd-sysusers; echo $?
0
~# sed -i '/sgx/d' /etc/group
~# systemd-sysusers; echo $?
Creating group 'sgx' with GID 106.
/etc/gshadow: Group "sgx" already exists.
1
To fix this, let's mirror the logic from the user path
(write_temporary_shadow()) where we simply drop the user from the "todo"
queue if it already exists in /etc/shadow instead of throwing an error.
The openpgp and tlsa verbs rejected --json= even though they
already determine the RR type they query. Allow JSON output for
these shortcut commands.
Accept matching explicit --type= values as well, but reject
mismatched types so openpgp only queries OPENPGPKEY records and
tlsa only queries TLSA records.
Refuse unauthenticated key records in JSON format so scripts do
not accidentally consume cryptographic DNS data that would only
produce a warning in human-readable output.
Fixes#43245
Introduce Slice.ActivatingConcurrencyMax to limit how many units
within a slice hierarchy may be in activating state concurrently.
Expose the setting over D-Bus, support transient/property parsing,
enforce it during unit start dispatch, and re-check queued starts when
units leave activating state.
Document the new slice option and add a PID1 concurrency test covering
queued startup behavior.
This is useful when writing coredump pattern. But the logic itself is
quite generic. Let's add the helper in our basic library.
Preparation for later change.
PNP devices may represent ACPI-enumerated hardware but do not have a
parent type supported by path_id. Consequently, importing path_id fails
even when the PNP device exposes a stable ACPI firmware_node. This also
prevents later assignments in rules such as the systemd-backlight
activation rule from taking effect.
Resolve the PNP device's firmware_node and use its ACPI sysname for the
path component. This gives PNP-backed devices the same stable identity
as their firmware representation.
Add a regression test using an RTC device below a PNP parent with an
ACPI firmware node.
sd_bus_message carries an array of header field offsets and a counter,
but their only reader was part of the D-Bus v2/GVariant sealing path
removed in 0dd4876815 ("sd-bus: drop D-Bus version 2 format support").
There are three remaining callers of message_extend_fields(), for
SD_BUS_MESSAGE_HEADER_DESTINATION, _PATH, and _INTERFACE, and all of
them pass false for add_offset. The receive path does not populate the
array either, so nothing reads or writes it any more.
Let's drop the two fields and the now unused add_offset argument and
branch.
This reduces sizeof(sd_bus_message) from 792...
$ gdb -batch build-baseline/test-bus-benchmark \
-ex 'ptype /o struct sd_bus_message'
...
/* 688 | 8 */ usec_t timeout;
/* 696 | 80 */ size_t header_offsets[10];
/* 776 | 4 */ unsigned int n_header_offsets;
/* XXX 4-byte hole */
/* 784 | 8 */ uint64_t read_counter;
/* total size (bytes): 792 */
to 704 bytes:
$ gdb -batch build-patched/test-bus-benchmark \
-ex 'ptype /o struct sd_bus_message'
...
/* 688 | 8 */ usec_t timeout;
/* 696 | 8 */ uint64_t read_counter;
/* total size (bytes): 704 */
On Fedora 43 aarch64 with glibc 2.42, the usable allocation for a
method-call message falls from 808 to 728 bytes, a reduction of 9.9%.
In my tests, retaining 400,000 method-call messages reduces in median
peak RSS from 363M to 332M.
Using `test-bus-benchmark chart direct 500ms` across message sizes from
1 byte to 2 MiB one can also see things are around 1% faster, which is
another nice incidental boost.
dongshengyuan
rodin-ia
Yu Watanabe
Frantisek Sumsal
Thomas Kopp
Hüseyin Kutsi Balcı
Confusedphoton
Hashim Khan
Semyon Klintsov
lzwind
Ludwig NusselandAkarithos
Emilio Sepulveda
Weblate Translation Memory
Emanuele Petriglia
Daan De Meyer
Luca Boccassi
Simon de Vlieger
Liu Zheng
Shivank Sharma
Morteza Pourkazemi
Andre Eikmeyer
Chris Down