These assertions impose an include order between <linux/fs.h> and
"missing_fs.h", specifically <linux/fs.h> can't be included before
"missing_fs.h". This makes automated include refactoring very painful,
so let's get rid of these assertions and instead assume that linux/fs.h
does the right thing.
These glibc headers conflicts with the corresponding linux headers
(<linux/in.h> and <linux/if.h>) and impose an include order (the glibc one
has to be included before any linux header is included). This makes sorting
includes a royal pain so let's define our own versions of these headers using
various linux headers to do all the work and filling in the missing bits
ourselves.
Delegation is enabled for udev so that it can mess around with the
cgroup hierarchy to avoid killing control processes when it calls
cg_kill in on_post() when it goes idle. We don't actually care about
any specific cgroup controllers in udev, so set Delegate= to enable
delegation without delegating any controllers
Follow up for https://github.com/systemd/systemd/pull/22752
This partially reverts 5332be60d3. I expect that
there is no practical difference, but it seems philosophically wrong to use
assert_se(), i.e. for the generation of the code in non-debug builds, just to
suppress a warning. We have _unused_ for that, use it.
I verified that we don't get warnings with clang and -DNDEBUG=1 with this patch.
@DaanDeMeyer Obviously this doesn't fix nearly everything, so gradually
moving things over is probably a smart thing? It seems clang-tidy does
support drop in configs for example:
```
# SPDX-License-Identifier: LGPL-2.1-or-later
---
Checks: '
-*,
bugprone-argument-comment
'
WarningsAsErrors: '*'
```
Its a bit strange that `WarningsAsErrors` isn't propagated, but dropping
this file in src/report/.clang-tiday invokes:
```
[1314/1543][1.5s] /usr/bin/clang-tidy --use-color -extra-arg=-fno-caret-diagnostics -p=/home/jelle/projects/systemd/build -quiet /home/jelle/projec
ts/systemd/src/repart/repart.c
../src/repart/repart.c:4715:41: error: argument name 'pubkey' in comment does not match parameter name 'public' [bugprone-argument-comment,-warning
s-as-errors]
4715 | /* pubkey= */ NULL, /* Turn this one off for the 2nd shard */
| ^
../src/shared/tpm2-util.h:281:108: note: 'public' declared here
281 | int tpm2_calculate_sealing_policy(const Tpm2PCRValue *pcr_values, size_t n_pcr_values, const TPM2B_PUBLIC *public, bool use_pin, const Tpm2
PCRLockPolicy *policy, TPM2B_DIGEST *digest);
| ^
```
So that seems to behave as intended :)
And in some cases I am not sure if switching to the correct argument is
an improvement ie.:
```
../src/bootctl/bootctl-reboot-to-firmware.c:66:51: [38;2;190;132;255m0;1;31merror: argument name 'dispatch_table' in comment does not match paramet
er name 'table' [bugprone-argument-comment,-warnings-as-errors]
66 | r = sd_varlink_dispatch(link, parameters, /* dispatch_table = */ NULL, /* userdata = */ NULL);
| [38;2;190;132;255m0;1;32m ^
../src/systemd/sd-varlink.h:187:98: [38;2;190;132;255m0;1;36mnote: 'table' declared here
187 | int sd_varlink_dispatch(sd_varlink *v, sd_json_variant *parameters, const sd_json_dispatch_field table[], void *userdata);
| [38;2;190;132;255m0;1;32m ^
```
or
```
../src/validatefs/validatefs.c:274:83: [38;2;190;132;255m0;1;31merror: argument name 'ret_len' in comment does not match parameter name 'len' [bugprone-argument-comment,-warnings-as-errors]
274 | (void) blkid_probe_lookup_value(b, "PART_ENTRY_TYPE", &v, /* ret_len= */ NULL);
| [38;2;190;132;255m0;1;32m ^
/usr/include/blkid/blkid.h:455:52: [38;2;190;132;255m0;1;36mnote: 'len' declared here
455 | const char **data, size_t *len)
| [38;2;190;132;255m0;1;32m ^
```
But that's also half a style thing with `len` winning over `ret_len`.
Follow-up for 511619087b.
Notable changes are
- SIGTERM is the highest among others, to make not udevd queue too
many events, as we need to serialize them anyway.
- device monitor has the second highest priority, to make 'remove'
uevents received earlier than IN_IGNORED inotify events. Otherwise,
after IN_IGNORED is received, if there is no queued event,
/run/udev/queue file will be removed by the post-event source of the
inotify event, and 'udevadm settle' or friends may wrongly finish,
even we will soon queue 'remove' uevents for the device.
This change should fix the recent instability of TEST-64-UDEV-STORAGE.
For other changes, see the comments in the code.
Note, it should be safe even if we synthesize no event, e.g. when the
device has been already removed. In such case, the post event after
SIGCHLD will remove the file.
This is mostly a paranoia, but if we failed to create /run/udev/queue
for some reasons on queueing an event, previously we would never create
the file until once the queue became empty. This makes in such case we
try to create the file again when queueing the next event.
RFC 5227 specifies randomized intervals to avoid that a large number of
hosts powered up at the same time send their message simultaneously.
Performing the conflict detection takes a variable time between 4 and 7
seconds from the beginning to the first announcement, as shown by the
following diagram where P indicates a probe and A an announcement:
```
time(s) 0 1 2 3 4 5 6 7 8 9
+---+---+---+---+---+---+---+---+---+
SHORTEST P P P A A
LONGEST P P P A A
```
The host can't use the address until the first announcement is sent. 7
seconds is a very long time on modern computers especially considering
the fact that the round-trip time on current LAN technologies is at most
few milliseconds. Section 2.2 of the RFC addresses this matter and hints
that a future standard will adjust those timeouts; however that standard
doesn't exist yet.
Make the timeout configurable via a new
"IPv4DuplicateAddressDetectionTimeoutSec=" option. The intervals defined
in the RFC are then scaled proportionally so that the duration of the
conflict detection takes at most the given value. Interval happening
after the first announcement are not scaled, as recommended by the RFC.
Also reduce the default value from 7s to 200ms, which is a more suitable
value for today's technology.
The original timeout of 7 seconds is very long for today's networks. Reduce it
to 200ms. Note that this change also affects IPv4 link-local addressing.
RFC 5227 specifies randomized intervals to avoid that a large number of hosts
powered up at the same time send their message simultaneously. Performing the
conflict detection takes a variable time between 4 and 7 seconds from the
beginning to the first announcement, as shown by the following diagram where P
indicates a probe and A an announcement:
time(s) 0 1 2 3 4 5 6 7 8 9
+---+---+---+---+---+---+---+---+---+
SHORTEST P P P A A
LONGEST P P P A A
The host can't use the address until the first announcement is sent. 7 seconds
is a very long time on modern computers especially considering the fact that
the round-trip time on current LAN technologies is at most few milliseconds.
Section 2.2 of the RFC addresses this matter and hints that a future standard
will adjust those timeouts; however that standard doesn't exist yet.
Make the timeout configurable via a new IPv4DuplicateAddressDetectionTimeoutSec=
option. The intervals defined in the RFC are then scaled proportionally so that
the duration of the conflict detection takes at most the given value. Interval
happening after the first announcement are not scaled, as recommended by the
RFC.
This is needed for dnf5. But dnf-4 doesn't know about it. So also add a hint to
skip the option with dnf-4. We can drop this later when dnf5 is the default
everywhere.
Also, s/vim-minimal/nano/. Nano is the default editor in Fedora since
https://fedoraproject.org/wiki/Changes/UseNanoByDefault.
Map the FN key of TUXEDO InfinityFlex 14 Gen1 that wrongly produces the F23
scancode by default.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
We currently only disable selinux logging in mac_selinux_setup(),
but not in mac_init(). We don't want libraries we use to log unless
we tell them to, so disable selinux's logging in mac_init() as well.
In case of failures we don't want to leave an image with intermediate
test configuration, as images are reused across multiple tests
Follow-up for edca63a632
meson will send SIGTERM if the test gets stuck and hits the timeout,
in which case we still want to do log saving and analysis, so let's
add some signal handlers which allow us to do that.
This won't be very useful until https://github.com/mesonbuild/meson/pull/14513
lands, since we only get half a second from meson to handle SIGTERM
before it sends SIGKILL, but let's land this already so we immediately
start taking advantage of the meson fix once it lands.
Daan De Meyer
Yu Watanabe
Luca Boccassi
Zbigniew Jędrzejewski-Szmek
joo es
David Rheinsberg
Jelle van der Waa
Mike Yuan
Jesper Nilsson
Beniamino Galvani
Werner Sembach
Michal Koutný
Luca Boccassi