The CCW id_net_name_path detection didn't account for virtio
interfaces on the CCW bus. As a result the default interface
names for virtio-ccw interfaces would use the old eth<x>
format instead of enc<busid>.
Since virtio-pci interface naming follows the naming rules
of the parent bus, the names_ccw() logic was changed to apply
the CCW interface naming rules to virtio interfaces as well,
e.g. enc2000 for an interface with a CCW bus id 0.0.2000.
As virtio interfaces are apt to get the otherwise unusual
CCW bus id 0.0.0000, the last '0' is now preserved in this
case.
The virtio subsystem skipping loop has been moved from
names_pci() into a function skip_virtio() that can be reused
for all bus types with virtio network devices.
Since virtio-ccw interfaces use single CCW addresses the ccwgroup
requirement was relaxed and the C definitions were changed
accordingly.
section_line and filename should be set together or not at all. Change the
if to test filename, since it's the first of the pair and it seems more natural
to test that.
The code was not incorrect previously, but I think it's easier to follow the
ownership (and the code is more likely to remain correct when updated later on),
if freeing of NetworkConfigSection* is immediately made the responsibility of
route_free(), so instead of relying on route_free() not freeing ->section
if adding to the network hashmap failed, make this freeing unconditional.
As the kernel won't map the UIDs this is simply not safe, and hence we
should generate a clean error and refuse it.
We can restore this feature later should a "shiftfs" become available in
the kernel.
This changes the file copy logic of machined to set the UID/GID of all
copied files to 0 if the host and container do not share the same user
namespace.
Fixes: #4078
This adds a unified "copy_flags" parameter to all copy_xyz() function
calls, replacing the various boolean flags so far used. This should make
many invocations more readable as it is clear what behaviour is
precisely requested. This also prepares ground for adding support for
more modes later on.
With this change we'll not show an "Addresses" field for machines that
we don't know any addresses for.
This changes print_addresses() to never suffix its output with a
newline, leaving that to the caller. That's a good idea since depending
on who the caller is, different rules apply: if no addresses are found,
then the list view still wants a newline, but the status view does not.
This also changes the function to return the number of found addresses,
which can be used to decide when to add a newline or not.
UID/GID mapping with userns can be arbitrarily complex. Let's break this
down to a single admin-friendly parameter: let's expose the UID/GID
shift of a container via a new bus call for each container, and let's
show this as part of "machinectl status" if it is not 0.
This should work for pretty much all real-life full OS container setups
(i.e. the stuff machined is suppose to be useful for). For everything
else we generate a clean error, clarifying that we can't expose the
mapping.
This changes resolved to use the compile-time fallback hostname the
configured one is not set. Note that if the local hostname is set to
"localhost" then we'll instead default to "linux" here, as for
mDNS/LLMNR exposing "localhost" is actively dangerous.
Currently, if the hostname is not set gethostname_malloc() defaults to
the "sysname", which is "linux" on Linux. Let's change that to also
honour the compile-time fallback hostname as specified on the configure
command line.
Drop the TEST_DATA_DIR macro as this was using alloca() within a
function call which is allegedly unsafe. So add a "suffix" argument to
get_testdata_dir() instead and call that directly.
Rename get_exe_relative_testdata_dir() to get_testdata_dir() and move
the env var check into that, so that everything interesting happens at
the same place.
automake helpfully sets a few variables for during build. When our executable
is in a directory underneath $(abs_top_builddir), we know that we're in the
build environment $(abs_top_srcdir) contains the sources, and test data is
under $(abs_top_srcdir)/test. This remains true no matter where the build
directory is relative to the source directory. It also works if the test
executable is invoked as ./test-whatever or .libs/test-whatever, since the
relative path is not used at all.
When running from outside of the build directory, we should be running from the
installed location and we can look for ../testdata relative to the location of
the exe file.
Of course, $SYSTEMD_TEST_DATA always overrides this logic.
That way, if the test directory does not exist we don't leave behind
temporary files (as in that case or on test failure the cleanup actions
don't run).
When trying to directly run a test executable in the build tree without
setting $TEST_DIR, some tests fail with a non-obvious error message.
Print an useful one instead.
This is a follow-up for #5359, fixing the error codes in a similar way
for the other NSS modules.
(user/group lookup calls don't have h_errnop, hence we don't update that
in those cases)
A bug exists where the conflict counter is cleared
regardless of whether or not the next probe attempt leads to
a successful address acquisition. This causes 'bursts' of
MAX_CONFLICTS probes followed by a delay of
RATE_LIMIT_INTERVAL instead of a single probe each
RATE_LIMIT_INTERVAL when beyond MAX_CONFLICTS.
The conflict counter should only be cleared after an
address is successfully acquired. This commit achieves that
goal.
From RFC3927:
A host should maintain a counter of the number of address
conflicts it has experienced in the process of trying to
acquire an address, and if the number of conflicts exceeds
MAX_CONFLICTS then the host MUST limit the rate at which it
probes for new addresses to no more than one new address per
RATE_LIMIT_INTERVAL. This is to prevent catastrophic ARP
storms in pathological failure cases, such as a rogue host
that answers all ARP probes, causing legitimate hosts to go
into an infinite loop attempting to select a usable address.
Signed-off-by: Jason Reeder <jasonreeder@gmail.com>
The correct error code to report when a provided buffer is too small is
ERANGE. This is recognized by glibc, which will then try again with a
larger buffer. The old behaviour of reporting ENOMEM has no special
meaning for glibc. The error will simply be propagated to the
application, and a later retry will trigger the same error again.
Additionally, h_errnop must be set to NETDB_INTERNAL to have glibc look
at errnop for details.
More information at:
https://www.gnu.org/software/libc/manual/html_node/NSS-Modules-Interface.html
Now we track the sections for example [Address] via line number.
Which was fine till we din't had dropins dir. If we have multiple
sections which have the ideantical line number in diffrent files
we are overwriting these since line number is the key.
This patch fixes this by taking filename and line number as key.
This fixes [Address] and [Route] section overwriting.
fixes: #5141
This breaks again, this time for setups where Qemu is not reported via DMI for whatever
reason. So swap order of cpuid and dmi again, but properly detect oracle.
See issue #5318.
$ ./coredumpctl --no-pager -1
TIME PID UID GID SIG COREFILE EXE
Sun 2016-11-06 10:10:51 EST 29514 1002 1002 - - /usr/bin/python3.5
$ ./coredumpctl info 29514
PID: 29514 (python3)
UID: 1002 (zbyszek)
GID: 1002 (zbyszek)
Reason: ZeroDivisionError
Timestamp: Sun 2016-11-06 10:10:51 EST (3h 22min ago)
Command Line: python3 systemd_coredump_exception_handler.py
Executable: /usr/bin/python3.5
Control Group: /user.slice/user-1002.slice/user@1002.service/gnome-terminal-server.service
Unit: user@1002.service
User Unit: gnome-terminal-server.service
Slice: user-1002.slice
Owner UID: 1002 (zbyszek)
Boot ID: 1531fd22ec84429e85ae888b12fadb91
Machine ID: 519a16632fbd4c71966ce9305b360c9c
Hostname: laptop
Storage: none
Message: Process 29514 (systemd_coredump_exception_handler.py) of user zbyszek failed with ZeroDivisionError: division by
Traceback (most recent call last):
File "systemd_coredump_exception_handler.py", line 134, in <module>
g()
File "systemd_coredump_exception_handler.py", line 133, in g
f()
File "systemd_coredump_exception_handler.py", line 131, in f
div0 = 1 / 0
ZeroDivisionError: division by zero
Local variables in innermost frame:
a=3
h=<function f at 0x7efdc14b6ea0>
Embedding sd_id128_t's in constant strings was rather cumbersome. We had
SD_ID128_CONST_STR which returned a const char[], but it had two problems:
- it wasn't possible to statically concatanate this array with a normal string
- gcc wasn't really able to optimize this, and generated code to perform the
"conversion" at runtime.
Because of this, even our own code in coredumpctl wasn't using
SD_ID128_CONST_STR.
Add a new macro to generate a constant string: SD_ID128_MAKE_STR.
It is not as elegant as SD_ID128_CONST_STR, because it requires a repetition
of the numbers, but in practice it is more convenient to use, and allows gcc
to generate smarter code:
$ size .libs/systemd{,-logind,-journald}{.old,}
text data bss dec hex filename
1265204 149564 4808 1419576 15a938 .libs/systemd.old
1260268 149564 4808 1414640 1595f0 .libs/systemd
246805 13852 209 260866 3fb02 .libs/systemd-logind.old
240973 13852 209 255034 3e43a .libs/systemd-logind
146839 4984 34 151857 25131 .libs/systemd-journald.old
146391 4984 34 151409 24f71 .libs/systemd-journald
It is also much easier to check if a certain binary uses a certain MESSAGE_ID:
$ strings .libs/systemd.old|grep MESSAGE_ID
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
$ strings .libs/systemd|grep MESSAGE_ID
MESSAGE_ID=c7a787079b354eaaa9e77b371893cd27
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE_ID=641257651c1b4ec9a8624d7a40a9e1e7
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE_ID=d34d037fff1847e6ae669a370e694725
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE_ID=1dee0369c7fc4736b7099b38ecb46ee7
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE_ID=be02cf6855d2428ba40df7e9d022f03d
MESSAGE_ID=7b05ebc668384222baa8881179cfda54
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
The entry must be a single entry in the journal export format, including the
terminating double newline. The MESSAGE field is now generated on the sender
side.
The advantage is that the reporter can easily pass additional metadata.
Continuing with the example of the python excepthook:
COREDUMP_PYTHON_EXECUTABLE=/usr/bin/python3
COREDUMP_PYTHON_VERSION=3.5.2 (default, Sep 14 2016, 11:28:32)
[GCC 6.2.1 20160901 (Red Hat 6.2.1-1)]
COREDUMP_PYTHON_THREAD_INFO=sys.thread_info(name='pthread', lock='semaphore', version='NPTL 2.24')
COREDUMP_PYTHON_EXCEPTION_TYPE=ZeroDivisionError
COREDUMP_PYTHON_EXCEPTION_VALUE=division by zero
MESSAGE=Process 29514 (systemd_coredump_exception_handler.py) of user zbyszek failed with ZeroDivisionError: division by zero
Traceback (most recent call last):
File "systemd_coredump_exception_handler.py", line 134, in <module>
g()
File "systemd_coredump_exception_handler.py", line 133, in g
f()
File "systemd_coredump_exception_handler.py", line 131, in f
div0 = 1 / 0
ZeroDivisionError: division by zero
Local variables in innermost frame:
a=3
h=<function f at 0x7efdc14b6ea0>
One consideration is whether to use the Journal Export Format, or send packets
over a UNIX socket instead. The advantage of current solution is that although
parsing is more complicated on the receiver side, it is much easier to use on the
sender side. I hope this can be used by various languages for which writing
binary structures to a UNIX socket is harder and more likely to be done wrong
than piping of a simple textyish format.
Only one test case is added, but it is enough to check basic sanity of the
code (single-line and binary fields and trusted fields, allocation and freeing).
