Most our other parsing functions do this, let's do this here too,
internally we accept that anyway. Also, the closely related
load_env_file() and load_env_file_pairs() also do this, so let's be
systematic.
Currently, "reboot" behaves differently in setups with and without logind.
If logind is used (which is probably the more common case) the operation
is asynchronous, we should behave in the same way as "systemctl <verb>".
Let's clean this up, and always expose the same behaviour, regardless if
logind is used or not: let's always make it asynchronous.
See: #6479
Fixes: commit 130246d2e8
Previously we were a bit sloppy with the index and size types of arrays,
we'd regularly use unsigned. While I don't think this ever resulted in
real issues I think we should be more careful there and follow a
stricter regime: unless there's a strong reason not to use size_t for
array sizes and indexes, size_t it should be. Any allocations we do
ultimately will use size_t anyway, and converting forth and back between
unsigned and size_t will always be a source of problems.
Note that on 32bit machines "unsigned" and "size_t" are equivalent, and
on 64bit machines our arrays shouldn't grow that large anyway, and if
they do we have a problem, however that kind of overly large allocation
we have protections for usually, but for overflows we do not have that
so much, hence let's add it.
So yeah, it's a story of the current code being already "good enough",
but I think some extra type hygiene is better.
This patch tries to be comprehensive, but it probably isn't and I missed
a few cases. But I guess we can cover that later as we notice it. Among
smaller fixes, this changes:
1. strv_length()' return type becomes size_t
2. the unit file changes array size becomes size_t
3. DNS answer and query array sizes become size_t
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76745
This is used as 'systemd-analyze show-config systemd/logind.conf', which
will dump
/etc/systemd/system/user@.service
/etc/systemd/system/user@.service.d/*.conf
/run/systemd/system/user@.service.d/*.conf
/usr/local/lib/systemd/system/user@.service.d/*.conf
/usr/lib/systemd/system/user@.service.d/*.conf
The idea is to make it easy to dump the configuration using the same locations
and order that systemd programs use themselves (including masking, in the right
order, etc.). This is the generic variant that works with any configuration
scheme that follows the same general rules:
$ systemd-analyze cat-config systemd/system.conf
$ systemd-analyze cat-config systemd/user.conf
$ systemd-analyze cat-config systemd/logind.conf
$ systemd-analyze cat-config systemd/sleep.conf
$ systemd-analyze cat-config systemd/journald.conf
$ systemd-analyze cat-config systemd/journal-remote.conf
$ systemd-analyze cat-config systemd/journal-upload.conf
$ systemd-analyze cat-config systemd/coredump.conf
$ systemd-analyze cat-config systemd/resolved.conf
$ systemd-analyze cat-config systemd/timesyncd.conf
$ systemd-analyze cat-config udev/udev.conf
This drops a good number of type-specific _cleanup_ macros, and patches
all users to just use the generic ones.
In most recent code we abstained from defining type-specific macros, and
this basically removes all those added already, with the exception of
the really low-level ones.
Having explicit macros for this is not too useful, as the expression
without the extra macro is generally just 2ch wider. We should generally
emphesize generic code, unless there are really good reasons for
specific code, hence let's follow this in this case too.
Note that _cleanup_free_ and similar really low-level, libc'ish, Linux
API'ish macros continue to be defined, only the really high-level OO
ones are dropped. From now on this should really be the rule: for really
low-level stuff, such as memory allocation, fd handling and so one, go
ahead and define explicit per-type macros, but for high-level, specific
program code, just use the generic _cleanup_() macro directly, in order
to keep things simple and as readable as possible for the uninitiated.
Note that before this patch some of the APIs (notable libudev ones) were
already used with the high-level macros at some places and with the
generic _cleanup_ macro at others. With this patch we hence unify on the
latter.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Note: in check_triggering_units 'path' will be allocated twice. This is a
conscious choice, this way the implementation is simpler and not worth
optimizing.
Fixes#8519.
This adds flags BUS_MAP_STRDUP and BUS_MAP_BOOLEAN_AS_BOOL.
If BUS_MAP_STRDUP is set, then each "s" message is duplicated.
If BUS_MAP_BOOLEAN_AS_BOOL is set, then each "b" message is
written to a bool pointer.
Follow-up for #8488.
See https://github.com/systemd/systemd/pull/8488#discussion_r175816270.
This macro will read a pointer of any type, return it, and set the
pointer to NULL. This is useful as an explicit concept of passing
ownership of a memory area between pointers.
This takes inspiration from Rust:
https://doc.rust-lang.org/std/option/enum.Option.html#method.take
and was suggested by Alan Jenkins (@sourcejedi).
It drops ~160 lines of code from our codebase, which makes me like it.
Also, I think it clarifies passing of ownership, and thus helps
readability a bit (at least for the initiated who know the new macro)
The warning is not emitted for absolute paths like /dev/sda or /home, which are
converted to .device and .mount unit names without any fuss.
Most of the time it's unlikely that users use invalid unit names on purpose,
so let's warn them. Warnings are silenced when --quiet is used.
$ build/systemctl show -p Id hello@foo-bar/baz
Invalid unit name "hello@foo-bar/baz" was escaped as "hello@foo-bar-baz" (maybe you should use systemd-escape?)
Id=hello@foo-bar-baz.service
$ build/systemd-run --user --slice foo-bar/baz --unit foo-bar/foo true
Invalid unit name "foo-bar/foo" was escaped as "foo-bar-foo" (maybe you should use systemd-escape?)
Invalid unit name "foo-bar/baz" was escaped as "foo-bar-baz" (maybe you should use systemd-escape?)
Running as unit: foo-bar-foo.service
Fixes#8302.
Even if pager_open() fails, in general, we should continue the operations.
All erroneous cases in pager_open() show log message in the function.
So, it is not necessary to check the returned value.
When we are in late shutdown, and for whatever reason kexec fails, we should
proceed with a normal reboot. Network is down and sessions have been terminated
when we attempt to do the kexec, so rebooting normally is a better solution.
Logs from the case where the kexec kernel is not usable:
Mar 08 11:23:10 fuefi systemd[1]: Reached target Final Step.
Mar 08 11:23:10 fuefi systemd[1]: Starting Reboot via kexec...
Mar 08 11:23:10 fuefi systemctl[1480]: Cannot find the ESP partition mount point.
Mar 08 11:23:10 fuefi systemctl[1480]: Failed to load kexec kernel, continuing without.
Mar 08 11:23:10 fuefi systemd[1]: Shutting down.
... and then we proceed to do a normal reboot
Related to #7730.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
NAME is kind of meaningless, because everything has a name. "Unit"
makes it more obvious that a name of a unit is necessary. I was always
momentarily baffled by "set-property NAME ASSIGNMENT...", where there
are two objects (the unit and the property), and it's not clear which of
the two "NAME" is supposed to signify.
So far, we had two implementations of reboot-with-parameter doing pretty
much the same. Let's unify that in a generic implementation used by
both.
This is particulary nice as it unifies all /run/systemd/reboot-param
handling in a single .c file.
This is primarily preparation for a follow-up commit that adds a common
implementation of the other side of the reboot parameter file, i.e. the
code that reads the file and issues reboot() for it.
