Commit Graph
29088 Commits
Author SHA1 Message Date
John Paul Adrian Glaubitz cc9211b030 udev/udevadm-monitor: fix format-specifier issue
timespec::tv_nsec can have different sizes depending on the
host architecture. On x32 in particular, it is 8 bytes long
while the long int type is only 4 bytes long. Hence, using
ld as a format specifier will trigger a format error. Thus,
explicitly cast timespec::tv_nsec to nsec_t and use PRI_NSEC
as the format specifier to make sure the sizes for both match.
2017-05-19 14:23:32 +02:00
John Paul Adrian Glaubitz b123d975ca journal/journald-console: fix format-specifier issue
timespec::tv_nsec can have different sizes depending on the
host architecture. On x32 in particular, it is 8 bytes long
while the long int type is only 4 bytes long. Hence, using
ld as a format specifier will trigger a format error. Thus,
explicitly cast timespec::tv_nsec to nsec_t and use PRI_NSEC
as the format specifier to make sure the sizes for both match.
2017-05-19 14:23:22 +02:00
Lennart Poettering 215a2db419 man: fix typo m86k → m68k (#5993) 2017-05-19 11:37:30 +02:00
Lennart Poettering b2d0c14214 Merge pull request #5598 from pfl/ndisc_prefix_delegation
Initial Router Advertisment implementation
2017-05-19 11:17:07 +02:00
Peter Hutterer 855cf359b2 udev: skip EVDEV_ABS override on devices without EV_ABS (#5984)
When we first handle a device with an EVDEV_ABS override, check if it has
EV_ABS bits. If not, print a warning and continue. This is required on devices
where the match string applies to multiple device nodes, not all of which may
have absolute axes.

Fixes https://github.com/systemd/systemd/issues/5079
2017-05-19 10:56:29 +02:00
Evgeny Vereshchagin e69c933694 Merge pull request #5988 from poettering/man-and-gcc
minor man page and gcc fixes
2017-05-19 09:34:39 +03:00
Lennart Poettering 86a48fb6f7 udev: turn off -Wformat-nonliteral for one safe case
c20e6de897 introduced a format string as
variable, but didn't turn off -Wformat-nonliteral warnings on it, thus
breaking the build. Let's fix that, by simply turning off the warning in
this case, as we know it's safe.
2017-05-18 22:26:12 -04:00
Lennart Poettering 6b7af82122 man: extend documentation on sd_bus_add_match a bit()
Explain briefly how the concept of "sd_bus_slot" works.

This recently came up on the mailing list, hence let's document this for
the next time.
2017-05-18 22:26:08 -04:00
Susant Sahani cb4d8b2d05 sd-netlink: Make use of IN_SET (#5977) 2017-05-18 12:56:36 +02:00
Daniel Wang 2d66f64865 gitignore: ignore /test-sd-dhcp-lease (#5983) 2017-05-17 20:14:58 -04:00
Lennart Poettering f731ad4456 Merge pull request #5957 from keszybz/test-c++
Test compilation under C++
2017-05-17 17:02:55 +02:00
Dimitri John Ledkov c20e6de897 udev: net_id add support for platform bus (ACPI, mostly arm64) devices (#5933)
Fixes: #5894
2017-05-17 15:28:35 +02:00
Zbigniew Jędrzejewski-Szmek d80e5b74e8 calendarspec: parse unix timestamps (@...) (#5947)
Fixes #5810.
2017-05-17 11:40:49 +02:00
Lennart Poettering a8b7e8a742 Merge pull request #5883 from garyttierney/fix-selinux
selinux: enable labeling and access checks for unprivileged users
2017-05-17 11:39:44 +02:00
Yu Watanabe 8ff213fd65 meson: do not use generate_gperfs.py for keyboard-keys-from-name.gperf (#5968)
Fixes #5967.
2017-05-15 20:51:22 -04:00
Charles Plessy f9d77d198e Add Lenovo UltraNav SK-8845 (#5963)
Closes #5952.
2017-05-15 08:16:16 -04:00
Zbigniew Jędrzejewski-Szmek 4a24ba71a3 meson: add rules for RA sources 2017-05-15 14:49:50 +03:00
Patrik Flykt 24852172b9 test-ndisc-ra: Add Router Advertisement test cases
Add tests for prefix creation, router variable setting and finally
verify that a Router Advertisement is properly formatted when sending.
Also check that there is a Router Advertisment with zero lifetime
when Router Advertisement sending is stopped.
2017-05-15 14:49:50 +03:00
Patrik Flykt 88d5a3db55 sd-radv: Receive Router Solicitations
Receive Router Solicitations and send a unicast Router Advertisment
in response. Refactor ICMPv6 packet handling code so that the common
ICMPv6 validation parts are reused between the existing router
discovery and the new functionality adding reception of Router
Solicitation messages.
2017-05-15 14:49:50 +03:00
Patrik Flykt 77baf5aee6 sd-radv: Send Router Advertisments
Create and remove the ICMPv6 Router Advertisement socket file
descriptor and implement Router Advertisment sending. As not
all options are mandatory, use IO vectors to point to the included
options and the prefix information.
2017-05-15 14:49:50 +03:00
Patrik Flykt e2e8122838 icmp6-util: Move multicast address definitions
As the Router Advertisment sending code needs these multicast
address definitions, move them to the header file.
2017-05-15 14:49:50 +03:00
Patrik Flykt 6142bb37a5 icmp6-util: Bind Router Advertisement socket
Reuse and refactor the functionality already present for Router
Solicitations in order to create a socket for sending Router
Advertisements. Anticipate reception of incoming Router
Solicitations by setting the ICMPv6 filter accordingly. Also set
the unicast hop limit to 255 for ICMPv6 sockets as unicast Router
Advertisments are to be sent in response to Router Solicitations.

Update the Router Solicitation test case code with a function
definition in order to keep the test case working.
2017-05-15 14:49:50 +03:00
Patrik Flykt 204fb681f6 sd-radv: Implement Router Advertisement timeout handling
Router Advertisements are sent uniformly distributed between a
minimum and maximum time according to RFC 4861, Section 6.2.4.
Default values from RFC 4861 are for now used as minimum and
maximum Router Advertisement timeouts.

When stopping, a Router Advertisement with a router lifetime set
to zero is sent in order to inform any nodes that the interface
on this host no longer is a router.
2017-05-15 14:49:50 +03:00
Patrik Flykt 7465dd22ad networkd-link.c: Add Router Advertisement starting and stopping
Start and stop Router Advertisement sending once the link has acquired
a link-local IPv6 address.
2017-05-15 14:49:50 +03:00
Patrik Flykt 091214b636 networkd-radv: Helper function for Router Advertisement initialization
Add a helper function for configuring Router Advertisement on a
specific network link. Add the prefixes that are going to be advertised.
2017-05-15 14:49:50 +03:00
Patrik Flykt 204f99d21e sd-radv: Add Router Advertisement functionality
Add Router Advertisement header files, data structures and core
functionality that is quite similar to other parts of networkd.
2017-05-15 14:49:50 +03:00
Patrik Flykt 7d5cac19b5 networkd: Add Router Advertisement variables
Add variables for enabling Router Advertisements, router lifetime as
well as managed and other information flags indicating use of DHCPv6.
Add configuration of default router preferences as defined in RFC 4191.

IPv6PrefixDelegation in the [Network] section has to be set in order
to enable prefix delegation. The rest of the prefix delegation values
are stored in the [IPv6PrefixDelegation] section. The host will act as
a default router if it is given a non-zero lifetime with
RouterLifetimeSec. Managed and OtherInformation booleans set the level
of DHCPv6 support, and the RouterPreference configures the router's
preference between low, medium and high. Words 'normal' and 'default'
are added as synonyms for 'medium' just to make configuration simpler.

This adds a section like the following to .network configuration files:
[Network]
IPv6PrefixDelegation=true

[IPv6PrefixDelegation]
RouterLifetimeSec=2000
Managed=false
OtherInformation=true
RouterPreference=medium
2017-05-15 14:49:50 +03:00
Patrik Flykt 9d5d0090ca networkd: Add IPv6Prefix sections to the network configuration files
Support zero or more [IPv6Prefix] sections in the network configuration
files. Each section can have one Prefix=<subnet>[/<prefixlength>]
option, with the preferred and valid lifetimes specified by
ValidLifetimeSec and PreferredLifetimeSec measured in seconds, and
with onlink and address autoconfiguration booleans specified by
OnLink and AddressAutoconfiguration variables.

This adds a section like the following to .network configuration files:
[IPv6Prefix]
Prefix=2001:db8:dead:beef::/64
OnLink=true
AddressAutoconfiguration=true
ValidLifetimeSec=1500
PreferredLifetimeSec=1000
2017-05-15 14:49:50 +03:00
Patrik Flykt 057abfd88a networkd: Add initial prefix handling for network configuration
Add initial code for handling prefixes in network configuration files.
Add hash map and list storing the information in systemd-networkd.
2017-05-15 14:49:50 +03:00
Patrik Flykt 04473969ef sd-radv: Add Router Advertisement prefix handling
Define Router Advertisement prefix structure. Add the Prefix
Information ICMPv6 option defined in RFC 4861 to the prefix
information structure, as it will simplify sending a Prefix
Information option later on. In order to handle endianness
correctly, the structure is redefined here instead of using
the one in netinet/icmp6.h.

Add functions to create and modify prefix information and set
default values as defined in RFC 4861, Section 6.2.1.
2017-05-15 14:49:50 +03:00
Zbigniew Jędrzejewski-Szmek 0f771be9ca test-bus-vtable: add SD_BUS_PROPERTY
Without cc9daff228, this results in:

src/libsystemd/sd-bus/test-bus-vtable-cc.cc:56:1: sorry, unimplemented: non-trivial designated initializers not supported
 };
 ^
2017-05-14 15:10:44 -04:00
Zbigniew Jędrzejewski-Szmek 5502d46f73 Merge pull request #5961 from ronnychevalier/rc/conf-parser-strv-typo
conf-parser: fix wrong argument given to log_syntax_invalid_utf8
2017-05-14 10:31:12 -04:00
Ronny Chevalier 16eefcafed env-util: fix memory leak (#5962)
If cunescape succeeds, but the assignment is not valid, uce is not freed.
2017-05-14 10:30:40 -04:00
Ronny Chevalier d5ade2d602 test-conf-parser: add valid and invalid utf8 test for config_parse_path 2017-05-14 13:19:11 +02:00
Ronny Chevalier b4958f42af conf-parser: fix wrong argument given to log_syntax_invalid_utf8
The condition is on "word", hence we give word instead of rvalue.

An assert would be triggered if !utf8_is_valid(word) is true and
rvalue == NULL, since log_syntax_invalid_utf8 calls utf8_escape_invalid
which calls assert(str).

A test case has been added to test with valid and invalid utf8.
2017-05-14 13:19:11 +02:00
Zbigniew Jędrzejewski-Szmek 94e2523b70 tests,meson: add test-bus-vtable, compiled as C and C++
This test is mostly a compilation test that checks that various defines in
sd-bus-vtable.h are valid C++. The code is executed, but the results are not
checked (apart from sd-bus functions not returning an error). test-bus-objects
contains pretty extensive tests for this functionality.

The C++ version is only added to meson, since it's simpler there.
Because of the .cc extension, meson will compile the executable with c++.

This test is necessary to properly check the macros in sd-bus-vtable.h. Just
running the headers through g++ is not enough, because the macros are not
exercised.

Follow-up for #5941.
2017-05-13 15:50:44 -04:00
Zbigniew Jędrzejewski-Szmek 3bf47e7392 test-ipv4ll: use assert_se consistently
We use assert_se in tests so that the asserts get evaluated even if compiled with NDEBUG.
2017-05-13 15:45:29 -04:00
Zbigniew Jędrzejewski-Szmek afc5fc1ffa tree-wide: drop assert.h includes
We provide an independent reimplementation in macro.h, and that's the one
we want to use. Including the system header is unnecessary and confusing.
2017-05-13 15:44:30 -04:00
Zbigniew Jędrzejewski-Szmek d7f149c1aa tests: make sure that our headers are valid c++
This adds a meson test because it fits nicely into the existing framework.
It should be enough to run this test once in a while, so I don't think it's
crucial to also have it under autotools.
2017-05-13 15:43:39 -04:00
Michael Biebl 0839f42ebf Merge pull request #5956 from eliasp/fix-typo-network-zones
man: fix typo (`--network-zones` → `--network-zone`)
2017-05-13 21:07:04 +02:00
Elias Probst cf917c27b6 man: fix typo (--network-zones → --network-zone) 2017-05-13 20:56:44 +02:00
Daniel Wang b85bc551c3 network: Implement DHCP Option 119 (Domain Search List) (#5932)
This adds a modified version of dhcp6_option_parse_domainname() that is
able to parse compressed domain names, borrowing the idea from
dns_packet_read_name(). It also adds pieces in networkd-link and
networkd-manager to properly save/load the added option field.

Resolves #2710.
2017-05-13 10:19:32 -04:00
Gary Tierney b3fb3c01ee audit-fd: check for CAP_AUDIT_WRITE before opening an audit socket
Adds a check to audit-fd.c to ensure that CAP_AUDIT_WRITE is present in
the set of effective capabilities before opening an audit netlink
socket.  This ensures that unprivileged systemd instances (MANAGER_USER)
don't try to log AVC permission checks with the audit subsystem when
CAP_AUDIT_WRITE is not present.
2017-05-12 14:43:39 +01:00
Gary Tierney 6d395665e5 Revert "selinux: split up mac_selinux_have() from mac_selinux_use()"
This reverts commit 6355e75610.

The previously mentioned commit inadvertently broke a lot of SELinux related
functionality for both unprivileged users and systemd instances running as
MANAGER_USER.  In particular, setting the correct SELinux context after a User=
directive is used would fail to work since we attempt to set the security
context after changing UID.  Additionally, it causes activated socket units to
be mislabeled for systemd --user processes since setsockcreatecon() would never
be called.

Reverting this fixes the issues with labeling outlined above, and reinstates
SELinux access checks on unprivileged user services.
2017-05-12 14:43:39 +01:00
Lennart Poettering 6e4177315f Merge pull request #5432 from keszybz/udev-logging
udev logging separation
2017-05-12 15:22:46 +02:00
Zbigniew Jędrzejewski-Szmek 5486a31d28 nss-resolve: drop the internal fallback to libnss_dns (#5945)
If we could not communicate with systemd-resolved, we would call into
libnss_dns. libnss_dns would return NOTFOUND for stuff like "localhost" and
other names resolved by nss-myhostname, which we would fall under the !UNAVAIL=
condition and cause resolution to fail. So the following recommended
configuration in nsswitch.conf would not work:

   hosts: resolve [!UNAVAIL=return] dns myhostname

Remove the internal fallback code completely so that the fallback logic
can be configured in nsswitch.conf.

Tested with
   hosts: resolve [!UNAVAIL=return] myhostname
and
   hosts: resolve [!UNAVAIL=return] dns myhostname

Fixes #5742.
2017-05-12 14:31:46 +02:00
Lennart Poettering 3823da25cf Merge pull request #5928 from keszybz/libidn2
Use idn2 instead of idn
2017-05-12 12:01:40 +02:00
Lennart Poettering 2cfafe4d03 Merge pull request #5942 from keszybz/timestamp-writing
Allow timestamp to be set by the file writing utility functions
2017-05-12 12:00:24 +02:00
Lennart Poettering 77f0f0a5c7 Merge pull request #5946 from evverx/test-sigbus-fixes
test-sigbus: use posix_fallocate rather than fallocate
2017-05-12 11:58:13 +02:00
Zbigniew Jędrzejewski-Szmek f089206caa README: update util-linux required compilation options (#5949)
Fixes #5563.
2017-05-12 10:49:48 +02:00