Drops the global-optind dependency from the test helper. Verb fixtures
stay inline as static const Verb[] — the section-based VERB() macro
would force unique verb names across the three test cases, which they
deliberately share to exercise overlap.
Co-developed-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Place VERB() declarations above each dispatch function and use
verbs_get_help_table() in help(). run() switches to
dispatch_verb_with_args(); the argv_looks_like_help() shortcut is
preserved since this is an internal tool with no proper option parsing.
Co-developed-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
There is no --help implemented, so both verbs don't get help strings.
We should probably add --help + --version, and a proper description
of the program, but I'm leaving that for later.
Co-developed-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Place VERB() declarations above each dispatch function and use
verbs_get_help_table() in help() so the command listing stays in sync.
run() switches to dispatch_verb_with_args(); the argv_looks_like_help()
shortcut is preserved since this is an internal tool with no proper
option parsing.
Co-developed-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Place VERB() declarations directly above each dispatch function and use
verbs_get_help_table() in help() so the command listing stays in sync.
run() switches to dispatch_verb_with_args(); the argv_looks_like_help()
shortcut is preserved since this is an internal tool with no proper
option parsing.
Co-developed-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
This is the util-linux mount-helper interface (mount.storage), so all
options stay hidden via help=NULL — they are not user-facing. The
namespace "mount.storage" is distinct from the storagectl namespace
used for the user-facing CLI.
Co-developed-by: Claude Opus 4.7 <noreply@anthropic.com>
This bothered me for a while, but I didn't think too much about it and just
copied the existing usage pattern. But it really doesn't make sense. We expect
the compiler to align the section properly. But if it didn't align it, applying
alignment after the fact would just cause our pointer to point to the middle
of the structure. That'd be even worse than a misaligned pointer.
Similarly, when doing pointer arithmetic, p++ should really result in a value
with the appropriate alignment. This is the basic principle of C pointer
addition. So we really shouldn't try to adjust the pointer ourselves. At most,
we can assert that it is indeed aligned in tests.
In 26b7c5ff3b, we introduced a new parser
for received DHCP message, but it was not used at that time. This PR
replaces the legacy parser with the new one, and makes the fuzzer also
use the new parser.
For the shell verb we want switches specified after the program name to
be passed to the program to execute, not processed by us. Mirror the
approach in 'userdbctl ssh-authorized-keys': start with
OPTION_PARSER_RETURN_POSITIONAL_ARGS, then lates switch to
STOP_AT_FIRST_NONOPTION for "shell" or NORMAL otherwise.
VERB declarations are placed directly above each function; functions
that dispatch multiple verb names get stacked VERB() declarations.
chainload_importctl() now takes the args strv instead of relying on the
global optind.
--help output is mostly the same.
--no-pager/--no-legend/--no-ask-password/-q/--quiet are now at the end.
bind-volume/unbind-volume are documented.
Fixes c9f461a806.
Co-developed-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Also, if the fuzzing engine provides a valid message, then try to build
json variant and UDP payload from the parsed message. We will drop
dhcp_lease_save() and dhcp_lease_load(), hence the tests for them are
dropped.
By the previous commit, networkd now exposes the received DHCP message
in the Descibe() DBus/Varlink method. Let's make networkctl deserialize
the DHCP message and use it where necessary.
Also, get private options from sd_dhcp_message object if sd_dhcp_lease
has it.
With this change, networkctl will be able to use the serialized DHCP
message object. Preparation for later changes.
It parses a received DHCP message and create corresponding sd_dhcp_lease
object for the message. Internally, it uses sd_dhcp_message object.
Note, the new parser is not used yet. The currently used one will be
replaced in later commit.
This internally uses sd_dhcp_message object, and replaces functions
for creating and sending DHCP messages.
By using sd_dhcp_message internally, now we can correctly send long
(> 255 bytes) option data that cannot be fit in a single DHCP option TLV.
This also fixes the value in DHCP option 57 (Maximum Message Size).
Previously the IP and UDP header size is subtracted from the interface
MTU, but it should not.
Except for the above, this should not change any effective behaviors.
networkctl status may transiently fail right after start_networkd() because networkd has not yet picked up the freshly-created link from the kernel. The retry loop in wait_operstate() did not catch the resulting subprocess.CalledProcessError, so the test aborted on the first attempt instead of retrying for the configured timeout.
Observed in TEST-85-NETWORK-NetworkdBridgeTests, subtest test_bridge_configure_without_carrier[no-slave]:
[ 19.600156] systemd-networkd-tests.py[526]: Failed to issue io.systemd.Network.Link.Describe() varlink call: Invalid argument
[ 53.124982] systemd[1]: systemd-networkd.service: Changed start -> running
[ 53.336167] systemd-networkd-tests.py[526]: ERROR: test_bridge_configure_without_carrier (__main__.NetworkdBridgeTests.test_bridge_configure_without_carrier) (test='no-slave')
[ 53.336167] systemd-networkd-tests.py[526]: self.wait_operstate('bridge99', operstate=r'(no-carrier|routable)', setup_state=None, setup_timeout=30)
[ 53.336167] systemd-networkd-tests.py[526]: subprocess.CalledProcessError: Command '['/usr/bin/networkctl', '-n', '0', 'status', 'bridge99']' returned non-zero exit status 1.
Co-developed-by: Claude Opus 4.7 <noreply@anthropic.com>
libgpg-error was added in 2017 (commit 76c8741060, Michael Biebl) to
gate HAVE_GCRYPT on its presence because src/resolve referenced
libgpg-error directly at the time. That usage is long gone — no source
file references any gpg-error API today — so the dependency only served
to fail HAVE_GCRYPT detection when gpg-error-dev wasn't installed.
libgcrypt's pkg-config Requires already pulls in the gpg-error headers
(via the transitive #include <gpg-error.h> in <gcrypt.h>), so dropping
the dep doesn't break compilation.
The net diff is negative because some spurious whitespace and forward
declarations were dropped. One new forward declaration was added. (For
verb_poweroff_machine. The func could be moved, but I think it's better
to keep it adjacent to verb_reboot_machine which is very similar.)
The BPF kprobe that fires on user namespace destruction is the only
thing
that triggers registry cleanup, so any time it doesn't run — ring buffer
overflow, kprobe missing, fdstore entry dropped outside our cleanup path
— a registry entry is left behind forever.
Stamp each registry entry with the kernel's unique namespace identifier
(NS_GET_ID, kernel ≥ 6.13) at allocation time. At manager startup, after
the existing fdstore→registry sweep, walk the registry and ask the
kernel
to look each namespace up by id via open_by_handle_at() on nsfs; if the
lookup returns -ESTALE the namespace is gone and we release the entry.
Old entries written before this change carry no identifier and are left
alone.
Add a namespace_open_by_id() helper for the lookup. The kernel restricts
open_by_handle_at() on nsfs to processes in the initial user namespace,
collapsing both permission denials and dead namespaces onto -ESTALE; the
helper refuses early with -EPERM outside the initial user namespace
so callers can tell the two apart.
Yu Watanabe
Zbigniew Jędrzejewski-Szmek
Daan De Meyer
Fco. Javier F. Serrador
Luca Boccassi